H3C MSR900-E Routers Bedienungsanleitung

H3C MSR900-E Routers

Installation Guide

Hangzhou H3C Technologies Co., Ltd.

http://www.h3c.com

Document version: 6W101-20140604

No part of this manual may be reproduced or transmitted in any form or by any means without prior

written consent of Hangzhou H3C Technologies Co., Ltd.

Trademarks

H3C, , H3CS, H3CIE, H3CNE, Aolynk, , H3Care, , IRF, NetPilot, Netflow,

SecEngine, SecPath, SecCenter, SecBlade, Comware, ITCMM and HUASAN are trademarks of

Hangzhou H3C Technologies Co., Ltd.

All other trademarks that may be mentioned in this manual are the property of their respective owners

Notice

The information in this document is subject to change without notice. Every effort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute the warranty of any kind, express or implied.

Environmental protection

This product has been designed to comply with the environmental protection requirements. The storage,

use, and disposal of this product must meet the applicable national laws and regulations.

Preface

The H3C MSR900-E Routers Installation Guide includes five chapters, which describe the preparing for

installation, installing the router, troubleshooting, chassis views and technical specifications, and LEDs.

This preface includes:

•Audience

•Conventions

•About the H3C MSR900-E documentation set

•Obtaining documentation

•Technical support

•Documentation feedback

Audience

This documentation is intended for:

•Network planners

•Field technical support and servicing engineers

•Network administrators working with the routers

Conventions

This section describes the conventions used in this documentation set.

GUI conventions

Convention Descri

tion

Boldface Window names, button names, field names, and menu items are in Boldface. For

example, the New User window appears; click OK.

> Multi-level menus are separated by angle brackets. For example, File > Create > Folder.

Symbols

Convention Descri

tion

WARNING An alert that calls attention to important information that if not understood or followed can

result in personal injury.

CAUTION An alert that calls attention to important information that if not understood or followed can

result in data loss, data corruption, or damage to hardware or software.

IMPORTANT An alert that calls attention to essential information.

NOTE An alert that contains additional or supplementary information.

TIP An alert that provides helpful information.

Network topology icons

Represents a generic network device, such as a router, switch, or firewall.

Represents a routing-capable device, such as a router or Layer 3 switch.

Represents a generic switch, such as a Layer 2 or Layer 3 switch, or a router that supports

Layer 2 forwarding and other Layer 2 features.

Port numbering in examples

The port numbers in this document are for illustration only and might be unavailable on your device.

About the H3C MSR900-E documentation set

The H3C MSR900-E documentation set includes:

Cate

Documents

Pur

oses

Product description and

specifications

MSR900-E routers

marketing brochures Describe product specifications and benefits.

Hardware specifications

and installation

MSR900-E routers

installation guide

Provides a complete guide to hardware installation

and hardware specifications.

Software configuration

MSR router series

configuration guides(V5)

Describe software features and configuration

procedures.

MSR router series

command references(V5)

Provide a quick reference to all available

commands.

MSR router series

Web-based configuration

guide

Describes Web-based configuraition procedures

Operations and

maintenance release notes

Provide information about the product release,

including the version history, hardware and software

compatibility matrix, version upgrade information,

technical support information, and software

upgrading.

Obtaining documentation

You can access the most up-to-date H3C product documentation on the World Wide Web

at http://www.h3c.com.

Click the links on the top navigation bar to obtain different categories of product documentation:

[Technical Support & Documents > Technical Documents]—Provides hardware installation, software

upgrading, and software feature configuration and maintenance documentation.

[Products & Solutions]—Provides information about products and technologies, as well as solutions.

[Technical Support & Documents > Software Download]—Provides the documentation released with the

software version.

Technical support

servic[email protected]

http://www.h3c.com

Documentation feedback

You can e-mail your comments about product documentation to inf[email protected].

We appreciate your comments.

Contents

Preparing for installation ············································································································································· 1

Safety recommendations ··················································································································································1

Site requirements·······························································································································································1

ESD prevention ·························································································································································2

EMI·············································································································································································2

Lightning protection··················································································································································2

Installation accessories and tools ····································································································································3

Pre-installation checklist ····················································································································································3

Installing the router······················································································································································· 5

Installation prerequisites ···················································································································································5

Installation flowchart·························································································································································5

Mounting the router on a workbench·····················································································································7

Installing the router on a wall··································································································································7

Installing the router in a rack ··································································································································8

Grounding the router ············································································································································ 10

Installing a WLAN antenna·································································································································· 14

Connecting interface cables································································································································· 15

Connecting USB devices······································································································································· 16

Connecting the console cable and setting terminal parameters ······································································ 17

Setting console terminal parameters ··················································································································· 18

Connecting the power cord ································································································································· 20

Verifying the installation ······································································································································· 21

Powering on the router ·················································································································································· 21

Startup process ······················································································································································ 21

Power-on check······················································································································································ 22

Configuring basic settings for the router············································································································· 22

Troubleshooting··························································································································································23

Power supply failure ······················································································································································ 23

System configuration problems····································································································································· 23

No terminal display ·············································································································································· 23

Garbled terminal display······································································································································ 23

No response from the serial port························································································································· 24

Restoring the factory settings ········································································································································ 24

Scenario 1······························································································································································ 24

Scenario 2······························································································································································ 24

Scenario 3······························································································································································ 24

Reset button usage guidelines······························································································································ 25

Appendix A Chassis views and technical specifications ························································································26

Chassis views ································································································································································· 26

MSR900-E ······························································································································································ 26

MSR900-E-W ························································································································································· 27

Technical specifications················································································································································· 27

Antenna specifications··················································································································································· 28

Appendix B LEDs························································································································································29

LEDs ················································································································································································· 29

LED description······························································································································································· 30

Index ···········································································································································································31

Preparing for installation

Safety recommendations

ARNING!

Before installation and operation, read all of the safety instructions in

Compliance and Safety Guide

supplied with your router.

Follow these general safety recommendations:

•Turn off all power and remove all power cables before opening the chassis.

•Unplug all power and external cables before moving the chassis.

•Before installation, locate the emergency power switch so that you can shut off power

immediately if necessary.

•Always wear an ESD wrist strap when installing the router.

•Do not stare into an open optical interface. The light can cause permanent eye damage.

•Use a good grounding system. This is essential for reliable operation.

•Confirm that the resistance between the chassis and the ground is less than 1 ohm.

Site requirements

The router can only be used indoors.

This section provides information about temperature, humidity, cleanness, and air quality requirements,

as well as rack-mounting requirements and protection against damage from lightning and EMI.

Table 1 Temperature and humidity requirements

Tem

erature Relative humidit

0°C to 40°C (32°F to 104°F) 5% to 90%

Table 2 Dust concentration limit in the equipment room

Substance Concentration limit (

articles/m3)

Dust particles ≤3 x 104(No visible dust on desk in three days)

NOTE:

Dust particle diameter ≥5 μm

Table 3 Harmful gas concentration limits

Gas Max. (m

/m3)

SO20.2

H2S 0.006

Gas Max. (m

/m3)

NH30.05

Cl20.01

To prevent overheating:

•Provide adequate clearance for air flow, including at least 10 cm (3.94 in) ventilation space

around the router's air intake and outlet vents.

•Make sure the site has an adequate cooling system.

ESD prevention

To prevent the electronic components from being damaged by ESD, follow these guidelines:

•The equipment and floor are correctly grounded.

•The equipment room is dust-controlled.

•Wear an ESD wrist strap when inspecting or handling a circuit board.

To attach an ESD wrist strap:

1. Wear the wrist strap on your wrist.

No wrist strap is supplied with the router. Prepare it yourself.

2. Lock the wrist strap tight around your wrist to keep good contact with the skin.

3. Insert the ESD plug into the ESD socket in the chassis.

4. Attach the alligator to the chassis.

IMPORTANT:

Check the resistance of the ESD wrist strap for safety. The resistance reading should be in the range of

1 to 10 megohm (Mohm) between human body and the ground.

EMI

EMI from any source adversely affects the router.

To prevent EMI:

•Use electromagnetic shielding when necessary.

•Take measures against interference from the power grid.

•Position the router as far as possible from any power source's grounding equipment or light-

prevention equipment.

•Position the router as far as possible from radio transmitters, radar, and all high-voltage or high-

frequency equipment.

Lightning protection

To protect the router from lightning:

•Make sure the grounding cable of the chassis is grounded correctly.

•Make sure the grounding terminal of the AC power receptacle is grounded correctly.

•Install a lightning arrester at the input end of the power supply.

Installation accessories and tools

Figure 1 and Figure 2 list the accessories and tools required for installing the router.

Figure 1 Installation accessories

NOTE:

The type of the antenna that comes with the router depends on the router model.

Figure 2 User-supplied tools and equipment

Pre-installation checklist

Item Re

uirements

Yes No

Installation

site Ventilation

•There is a minimum clearance of 10 cm (3.9 in) around

the router chassis intake and exhaust vents for heat

dissipation.

•The installation site ventilation system is adequate.

Andere Handbücher für MSR900-E Routers

Inhaltsverzeichnis

Andere H3C WLAN-Router Handbücher

H3C

H3C MSR810 Bedienungsanleitung

H3C

H3C Magic BX54 Bedienungsanleitung

H3C

H3C MSR810 Bedienungs- und Wartungshandbuch

H3C

H3C MSR 800 Bedienungsanleitung

H3C

H3C Magic NX30 Bedienungsanleitung

H3C

H3C MSR 20-1X Bedienungsanleitung

H3C

H3C SR6616 Bedienungsanleitung

H3C

H3C MSR810 Bedienungsanleitung

H3C

H3C MSR900-E Routers Bedienungs- und Wartungshandbuch

H3C

H3C CR19000-16 Bedienungsanleitung

H3C

H3C MSR 930 Bedienungs- und Wartungshandbuch

H3C

H3C Magic NX15 Bedienungsanleitung

H3C

H3C MSR810 Betriebsanleitung

H3C

H3C MSR 800 Bedienungsanleitung

H3C

H3C MSR810 Benutzerhandbuch

Beliebte WLAN-Router Handbücher anderer Marken

Airlogic

Airlogic AirSync Class 1 Betriebsanleitung

Samsung

Samsung WCH730B Bedienungsanleitung

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Bedienungsanleitung

Askey

Askey RAC2V1K Bedienungsanleitung

Alloy

Alloy WLF2454AP-S Bedienungsanleitung

TELEFONICA

TELEFONICA USB Adapter Bedienungsanleitung

TP-Link

TP-Link TL-WR542G Bedienungsanleitung

Hama

Hama 53120 Bedienungsanleitung

Intellinet

Intellinet 524582 Bedienungsanleitung

Asus

Asus RT-N10P Bedienungsanleitung

D-Link

D-Link DIR-506L Bedienungsanleitung

Sapido

Sapido GR297n Bedienungsanleitung

Asus

Asus DSL-N55U Bedienungsanleitung

AMTC

AMTC WR7502 Bedienungsanleitung

Compaq

Compaq CP-2W - iPAQ Connection Point Bedienungsanleitung

SMC Networks

SMC Networks WBR14-N2 FICHE Bedienungsanleitung

Draytek

Draytek Vigor2120 Series Bedienungsanleitung

Sitecom

Sitecom WLR-4000 Bedienungsanleitung