6E 6354E4
Hager 11.2012 OCOM 115408
n automatic mode, the symbol indicates that
an override coming from the override entry is
active.
Override input
This menu allows you to define:
• The product which operates the input (push button
or switch).
•The function activated:
- inversion of the state of output contact
- time delay ON output activated for an adjustable
time
- Permanent OFF
INPUT
FUNCTIONS
BACK
AUTO
INPUT
PIN-CODE
CYCLES
COUNTER
INPUT
CHANNEL A
NO
BACK
AUTO
WITH
PUSH BUTT
RANDOM
FUNCTION
PERMANENT
OFF
PERMANENT
ON
TIMER
FUNCTION
WITH SWITCH
FUNCTION
CHANGEOU
CHANNEL A
YES
CHANNEL D
CONTINUE
As soon as the key is present on the switch
PROG KEY appears on the screen.
Two types of operation:
A. Permanent override:
nsert the key into the switch.
After 10 seconds the program contained in the key
will be executed without clearing the program
contained in the time switch.
As soon as the key is removed the program of the
time switch is again valid.
B. Copy / Save:
The key allows you to save a program contained
in the time switch. You can also copy the contents
of the key to the clock.
1. ntroduce the key PROG KEY appears on the
screen. Press ok.
2.Using +or –, select:
save on key: to save the programme contained
in the product,
Record in clock: to load the key programme
into the time switch,
apply key prog: to execute the programme
contained in the key without deleting the one
present in the device.
Key readout: to check the programme
contained in the key.
3. Validate your choice by ok.
An error message may appear on the screen:
Check the type of key.
The error message remains on display as long as
the key is present, but the time switch programme
is the one which is executed
Key
By successively pressing the channel command
button.
f the output state is On :
1st press : temporary override. Off and flashing.
Return to automatic mode will take
place at the next programme step.
2nd press : permanent override. Off and are
fixed. This override must be cancelled
manually.
3rd press : forçage permanent. On and sare
fixed. This override must be cancelled
manually.
4th press : Random operation. For the simulation
of presence, as well as the state of
output are displayed. Must be cancel-
led manually.
n this case the programme steps
are staggered at random in a slot of
± 59 min.
5th press : return to automatic mode. The state
of output as well as the symbol
are displayed.
Overrides
Random operation
The “Counter” menu allows you to visualise the
number operating hours (position ON) for every
output, as well as the number of time changes
since commissioning.
The counter also allows you to visualise the
number of operating hours of the clock (product
connected to mains supply).
The counters cannot be reset to zero (even after
activating the function factory settings).
Press the button menu.
Using the buttons +or–,then ok,select the
FUNCT ONS menu, then COUNTER.
The first line indicates the number of operating
hours of the output.
The second line indicates the number of time
changes (ON then OFF) done by the output.
The buttons +or–allow you to scroll the various
indicators.
Press the button ok to exit this menu.
n order to create a cycle programme you must
have previously defined the operating cycle(s).
A cycle is defined by x h, x min, x sec ON then
x h, x min, x sec OFF.
This menu allows you to define, modify or
deactivate up to 4 different cycles.
During the creation of a programme step, the
active cycles appear in the choice of the state
of output.
To create or modify a cycle:
To deactivate a cycle:
Deactivating a cycle also deactivates all the
programme steps concerned.
The menu P N CODE allows you to lock the clock
keyboard.
When the P N number is active:
The symbol flashes to indicate that the function is
activated.
After 1 minute without action on the product, the
keyboard is locked.
The symbol indicates that the keyboard is locked.
You must enter the P N number to reactivate the
keyboard.
To deactivate the key oard lock y PIN NUMBER
COUNTER
CYCLE
PIN-CODE
FUNCTIONS
INPUT
PIN-CODE
CYCLES
COUNTER
FUNCTIONS
BACK
AUTO
INPUT
PIN-CODE
CYCLES
COUNTER
CYCLE
CYCLE 4
CYCLE 3
CYCLE 2
CYCLE 1
ACTIVATE
CANCEL
TEMPO ON
HOUR
00:00 00
TEMPO ON
MINUTE
00:00 00
TEMPO ON
SECOND
00:00 00
TEMPO OFF
HOUR
00:00 00
TEMPO OFF
MINUTE
00:00 00
TEMPO OFF
SECOND
00:00 00
CYCLE
CYCLE 4
CYCLE 3
CYCLE 2
CYCLE 1
ACTIVATE
CANCEL
FUNCTIONS
BACK
AUTO
INPUT
PIN-CODE
CYCLES
COUNTER
PIN-CODE
PIN-CODE
CANCEL
PIN-CODE
ACTIVATE
PIN-CODE
PROG
0000
PIN-CODE
PROG
0000
PIN-CODE
PROG
0000
PIN-CODE
PROG
0000
With the buttons +or –,
enter or modify the 4 figures
of the P N number.
Validate by ok.
With the buttons +or –,
select ACT VATE.
Validate by ok.
PIN-CODE
PIN-CODE
CANCEL
PIN-CODE
ACTIVATE
To activate the key oard lock y PIN code
(or modify the PIN code)
-Permanent ON
-Random function
•The channel (or channels) concerned by the
override input.
