HAI OmniTouch 5.7 Bedienungsanleitung

Home Automation, Inc.

Model 53A00-1

OmniTouch 5.7 Touchscreen

with Video

User’s Guide

Document Number 53R00-1 Rev A

June, 2007

DESCRIPTION

The Model 53A00-1 OmniTouch 5.7 Touchscreen with Video is a colorful “plug and play”

touchscreen interface for HAI controllers. When an HAI video encoder is installed with your

system, you can view digital video from up to 6 cameras, automatically have camera images

pop-up on specified touchscreens based upon an event (e.g. driveway sensor is tripped), and run

macros (e.g. activate an electric door strike) from the “Video” page on any OmniTouch 5.7

Touchscreen with Video. It is ideal for seeing who is at the front door, pool, yard, or nursery.

OmniTouch 5.7 with Video is self-configuring based on the programming of your HAI

controller. Changes made on your system automatically show on the touchscreen, allowing you

to maintain and reprogram your system remotely.

OPERATION

The touchscreen is designed with everything that is necessary for you to operate and program

your HAI system.

In its normal state, the Home page is displayed which shows the day, date, time, current security

mode (if applicable), and current outdoor temperature (if applicable). At the bottom of the

display, the system status is shown. If all doors, windows, sensors, etc. are secure, no zones are

bypassed, and if there are no troubles, the bottom line will show "SYSTEM OK" as seen below:

The Home page displays an icon for each function that you can perform from the touchscreen.

According to your system configuration, not all icons may be visible (as shown above) if the

option isn’t part of your system or if you don’t want a touchscreen to access those items.

HOME PAGE

Simply touch one of the icons to select the desired function.

Control: Control units (lights, appliances, outputs, and flags), scenes, and all on/off

Security: Arm/disarm security, emergency alarms, bypass/restore zones, and go to area*

Modes: Set a mode (home, away, night, vacation, party, and special) and go to area*

Button: Activate Button (macro) programs

Temperature: Control thermostats, temperature sensors, and humidity sensors

Status: View status of lights, zones, and temperatures / view and edit programs

System: View event log, command voice/text messages, configure the touchscreen and

controller, clean the screen, and create controller programs

Setup: Configure touchscreen and controller, clean screen, and create programs**

Video: View a camera, select from 6 different cameras, set the contrast and brightness

for the current camera, select full screen video, and run a macro**

Audio: View and control a multi zone audio distribution system

* Some HAI automation systems have lighting “Modes”, rather than “Security”

** If video is not connected to the system, “Setup” is displayed; otherwise “Video” is displayed

TOUCHSCREEN LED

If security is part of your HAI system, the touchscreen LED is used to indicate whether the

security system is currently armed or disarmed. If armed in any security mode, the LED is set

to red. If the system is disarmed, the LED is set to green. The LED flashes when a Message is

displayed.

If lighting modes are part of your HAI system, the touchscreen LED is always green. The LED

flashes when a Message is displayed.

LIST BOXES

Selectable items (such as units, zones, buttons, temperatures, etc.) are displayed in a list box.

An item may be selected from a list box by simply touching the item in the list or by pressing

the [up arrow] or [down arrow] buttons to scroll through list items. With each press, the next

item is highlighted. Press [enter] to select the highlighted item.

Press the [page up] or [page down] buttons

to scroll through pages (groups) of items.

With each press, the next group of items is

displayed with the first item in the list

highlighted.

Press [up arrow] to move up one item

in the list. If you are at the top item

in the list, the [up arrow] will bring

you to the last item on the previous

page.

Press [down arrow] to move down

one item in the list. If you are at the

last item in the list, the [down arrow]

will bring you to the top item on the

next page.

Press [page up] to move up to the

previous page (group of items in the

list).

Press [page down] to move to the

next page (group of items in the list).

Press [enter] to select the highlighted

item.

Press [exit] to exit from the current

page and return to the Home page.

You may press and hold the [up arrow], [down arrow], [page up], and [page down] buttons to

quickly scroll through list items and pages.

SECURITY

If security is part of your automation system, the following information supplements the

information in your controller owner’s manual. Refer to your controller owner’s manual for

complete operating instructions.

Arming and Disarming

To arm or disarm the security system, from the Home page, touch the [Security] icon.

The top line on the “Security” page displays the current security mode.

If the system is disarmed and “Quick Arm” is enabled, simply touch the desired security mode

button and the system will immediately begin arming.

To disarm security, arm security from one mode to another, or to arm from the disarmed state if

“Quick Arm” is disabled, a code is required. After you touch the desired security mode or

[Disarm Security] button, the “Keypad” page is displayed:

Enter your four-digit code. If you make a mistake, press the [Clear] button and start over or

press the [exit] button to return to the previous page. After the last digit of a valid code is

entered, the system will perform the desired task.

Auto Bypass

If “Auto Bypass” is enabled in your system, when you arm security, your system will

automatically bypass any zones that are left open when the system is armed.

If “Auto Bypass” is disabled in your system, when you arm security and zones are left open, the

touchscreen will display: “System Not Armed – Zone(s) Not Ready”. Secure the open zone(s),

and then press the [Retry] button; the system will immediately begin arming if all zones are

secure.

Silencing Alarms

To disarm the security system after an alarm has tripped, or during the entry delay, simply press

the [Disarm] button, then enter your four-digit code on the “Keypad” page. The [Disarm] key

disarms the burglar alarm, resets emergency alarms, and silences all sirens and sounders.

Arming and Disarming other Security Areas

If your system is configured with multiple security areas, it is possible to arm other individual

areas or all areas from the “Security” page.

Before selecting the desired security mode or [Disarm Security] button, first select the [Area]

button. The “Area” list box is displayed with available security areas.

Select the desired area from the list box or

select “All Areas” to arm or disarm all security

areas.

After selecting the desired area, you return to

the “Security” page where you must select the

desired security mode or [Disarm Security]

button.

After you touch the desired security mode or [Disarm Security] button, the “Keypad” page is

displayed. In order to arm/disarm a different area, you must have a Master code or a code that

is valid for the selected area. Likewise, to arm/disarm “All Areas”, you must have a Master

code or a code that is valid for all areas.

Even if “Auto Bypass” is enabled, the system will not arm another area if any zones in that area

are left open. The touchscreen will display: “System Not Armed – Zone(s) Not Ready”. Secure

the open zone(s) in the selected area(s), and then press the [Retry] button; the system will

immediately begin arming if all zones are secure.

More Options

To bypass and restore zones, activate emergency alarms, and go to a different area, from the

“Security” page, press the [More Options] button:

Emergency Keys

If enabled, emergency alarm conditions can be activated through the touchscreen. These

conditions (Fire, Police, and Auxiliary) are initiated when the [Police], [Fire], or [Aux] button is

pressed and held approximately 1-second. If enabled, the Emergency Keys are always armed.

GOTO

If your system is configured with multiple areas, it is possible to temporarily assign the

touchscreen to a different area. All security and control commands will now operate on the

selected area, just as if you were physically at a touchscreen or console assigned to that area.

All status displays will show the status of the selected area.

To go to a different area, press the [GOTO] button. An “Area” list box is displayed. Select the

area from the list box, and then enter a valid code for that area. After the last digit of a valid

code is entered, the touchscreen will display the Home page for the selected area.

Use the [GOTO] button again to return to the area normally assigned to that touchscreen.

STATUS

The “Status” page displays the current status of various items in the system, zones, security

mode, energy cost, outdoor temperature, the time of Sunrise and Sunset, and allows you to

control, view, and edit programs for lighting and temperature devices. From the Home page,

touch the [Status] icon:

The main “Status” page displays the time of Sunrise and Sunset for the current day, current

security mode, energy cost, and outdoor temperature (if applicable). According to your system

configuration, not all icons may be visible (as shown above).

Control and Temperature Status

Touch the [Control] icon or the [Temperature] icon to view the status of each control and

temperature device connected to the system, to change the status of a device, to view all

programs that control the current device, and to edit a selected program that controls the device.

Press [page down] to display the next item and press [page up] to display the previous item.

Press the [Change] button to change the status of the selected device.

To view all of the programs that control the selected device, press the [Program] button. To

view or edit programs, a code is required. After the last digit of a valid code is entered, a list of

programs that control the selected device is displayed:

To modify or delete a program, highlight a program by simply touching the program in the list

or by pressing the [up arrow] or [down arrow] buttons to scroll through programs. With each

press, the next program is highlighted. Press the [page up] or [page down] buttons to scroll

through groups of programs. With each press, the next group consisting of 2 programs is

displayed, with the first program in the list highlighted.

Press the [Modify] button to modify (edit) the selected program using the “Program” pages (see

“Program” in this document for information regarding constructing and editing a program).

Press the [Delete] button to delete the selected program. When pressed, a “Confirm Deletion?”

page is displayed. Press the [Delete] button to confirm your choice to delete the program. Once

pressed, the program will be permanently deleted from the system. If you choose not to delete

the program, simply press the [exit] button in the lower-right corner.

Zone Status

Touch the [Zones] icon to view the current status of each zone. The display will show the zone

name and the current status of the zone. Press the [page up] or [page down] buttons to scroll

through groups of zones. Zones that are “secure” are displayed in green, zones that are “not

ready” are displayed in red, and zones that are in “trouble” are displayed in yellow.

Test

Touch the [Test] icon to check the status of the battery, telephone, bell circuit, auxiliary fuse,

and security zone loop readings. The pages look and operate similar to an HAI console. Refer

to your controller owner’s manual for complete operating instructions. When complete, press

the [*] key to exit the “Test” page.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HAI Touch-Screen Handbücher

HAI

HAI OmniTouch 32A00-1 Bedienungsanleitung

HAI

HAI 53A00-1 Bedienungsanleitung

HAI

HAI OmniTouch 10 pe Bedienungsanleitung

HAI

HAI OmniTouch 32A00-1 Bedienungsanleitung

HAI

HAI OmniTouch 10p Bedienungsanleitung

Beliebte Touch-Screen Handbücher anderer Marken

Elecro Engineering

Elecro Engineering Poolsmart Plus Montageanleitung

Johnson Controls

Johnson Controls IQ4 HUB Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems ET2270L Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems ET1002L Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems 3201L Bedienungsanleitung

Duratec

Duratec S15 Bedienungsanleitung

Crestron

Crestron TPMC-3SM Bedienungsanleitung

Racelogic

Racelogic MFD Touch Bedienungsanleitung

J2 580 Benutzerhandbuch

panel

panel PC PSR108-FM Series Bedienungsanleitung

Tipro

Tipro FREE+ Bedienungsanleitung

Systemline

Systemline Commander Bedienungsanleitung

Interactive Technologies

Interactive Technologies Insite Bedienungsanleitung

GVision

GVision Legacy Bedienungsanleitung

BeiJer

BeiJer T21C-C24 Bedienungsanleitung

Advantech

Advantech ITM-5117 Series Bedienungsanleitung

Edge

Edge CS Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems WALLABY PRO Bedienungsanleitung