Haier HW-BA101ABT Bedienungsanleitung

• Please read this operation manual before using the air conditioner.

• Please keep this manual carefully and safely.

HW-BA101ABT

Wired Controller Operation & Installation Manual English

Telecomando via cavo Manuale di Operazione & Installazione Italiano

Contrôleur câblé Manuel d’Utilisation et d’Installation Français

Kabelgebundener Controller Betriebs- und Installationsanleitung Deutsch

Controlador alámbrico Manual de Operación & Instalación Español

Controlador com o Manual de Operação e Instalação Português

Nederlands

Bedrade controller Gebruiks- en installatiehandleiding

Русский

Руководство по экслпуатации и монтажу проводного контроллера

HW-BA101ABT

Wired Controller

Operation & Installation Manual

• Please read this operation manual before using the air conditioner.

• Please keep this manual carefully and safely.

CONTENT

Parts and Functions............................................................................................................................1

Operation............................................................................................................................................4

Wired Controller Wiring Instruction...................................................................................................13

Parts and Functions

Interface Display

Key

On/O󰀨 key

Auto mode key

Cooling mode key

Heating mode key

Fan mode key

Dry mode key

Swing key

/ Decrease/Increase key

Quiet key

Fan speed key

Parts and Functions

Icon

Auto mode

Cooling mode

Heating mode

Parts and Functions

Fan mode

Dry mode

Display temperature setpoint / ambient Temperature /

parameter

Swing function

Quiet function

Lock icon

Central Control icon

Child lock

ECO

Error icon

Low fan speed

Medium fan speed

High fan speed

Auto Fan ( Four dots on the right side of fan speed icon will

display dynamically)

Operation

Dip Switch Denition

Dip Switch On/o󰀨 status Function description Default settings

SW3

SW3-1 ON Slave wired controller OFF

OFF Master wired controller

SW3-2 ON Display ambient temperature OFF

OFF Do not display ambient temperature

SW3-3 ON Collect ambient temperature form the PCB of indoor unit OFF

OFF Collect ambient temperature from wired controller

SW3-4 ON Non-volatile memory invalid OFF

OFF Non-volatile memory valid

SW3-5 ON Reserved OFF

OFF Reserved

SW3-6 ON Reserved OFF

OFF Reserved

SW3-7 ON Reserved OFF

OFF Reserved

SW3-8 ON Eco function valid OFF

OFF Eco function invalid

SW2

SW2-1 ON Mode key limited OFF

OFF Normal

SW2-2 ON Buzzer invalid when keys are pressed OFF

OFF Normal

SW2-3 ON Reserved OFF

OFF Reserved

SW2-4 ON Reserved OFF

OFF Reserved

After turning the power of wired controller on or resetting the wired controller, all icons of the wired

controller will display rst and then the program version No. will display, then 88.8 will be displayed in

order till the initialization completed.

If the wired controller can’t communicate with the indoor unit PCB normally after powering on, the

initialization will be nished in 4 minutes, and then the communication malfunction can be checked

from the malfunction inquiry function.

Initialization

Operation

Press to switch on or switch o󰀨 the wired controller. When the wired controller is turned on,

setpoint temperature, mode and fan speed etc. will display. After the wired controller is turned o󰀨, only

will display (if SW3-2 is on, ambient temperature will be display).

On/O󰀨

Press the corresponding mode key to select the mode. The mode key icon which is selected will be lit,

while other mode key icons will be dimmed.

Mode selection

Press or or slide the semi-circle dots in temperature display area to adjust the

temperature. When the ECO function is not selected, the adjustment range of the temperature setpoint

is 16°C~30°C.

Temperature setpoint adjustment

Press or slide the dot on the right of fan speed icon to adjust fan speed.

Adjustment range: Low → Medium → High →Auto fan speed.

In fan mode, there is no auto fan speed.

Fan speed adjustment

Press to switch on or switch o󰀨 the swing function.

When swing function is turned on, the swing icon will be lit.

When swing function is turned o󰀨, the swing icon will be dimmed.

Swing on/o󰀨

Press to switch on or switch o󰀨 the quiet function.

When quiet function is turned on, the quiet icon will be lit.

When quiet function is turned o󰀨, the quiet icon will be dimmed.

Quiet Function

Operation

Dial SW3-8 to ON, the ECO function will be turned on and will display after resetting the wired

controller or turning the power of wired controller on again. The setpoint temperature under mode of

cooling, heating and dry will be limited.

Dial SW3-8 to OFF, the ECO function will turn o󰀨 and will disappear after resetting the wired

controller or turning the power of the wired controller on again.

(1) Setting ECO parameter of cooling.

Turn on the wired controller and select cooling mode, adjust the setpoint temperature to 30°C and hold

and keys for 5s to set ECO parameter which will appear in temperature display area and the

default value is 23. The parameter can be adjusted by or ranging from 16 to 30. Press

to conrm. If no keys are pressed within 10s after completing the settings, the parameter adjustment

interface will exit automatically and the previous change will be invalid.

ECO parameters of cooling limits the minimum set-point temperature in cooling mode and dry mode.

For example, if ECO parameter of cooling is set to 23, as a result, the set-point temperature range is

23°C to 30°C in cooling mode and dry mode after ECO function is activated.

ECO function

(2) Setting ECO parameter of heating

Turn on the wired controller and select heating mode, adjust the setpoint temperature to 16°C. Hold

and for 5s to set the ECO parameter of heating which will appear in temperature display

area and the default value is 26. The parameter can be adjusted by or ranging from 16 to 30.

Press to conrm after completing the settings. If no keys are pressed within 10s, the parameter

adjustment interface will exit automatically and the previous change will be invalid.

ECO parameter of heating limits the maximum setpoint temperature in heating mode. For example,

if ECO parameter of heating is set to 26, as a result, the range of the setpoint temperature in heating

mode is 16°C~26°C after the ECO function is activated.

Operation

When the backlight is lit up, hold and for 5s to activate the child lock function. After function

is turned on, the icon will display statically. As a result, all keys are invalid. If you press any of the

keys, the icon will blink 3s to indicate no keys can be pressed.

When the child lock function is turned on, lit up the backlight, then hold and for 5s to turn o󰀨

child lock function.

Child lock function

If the current temperature unit is °C, adjust setpoint temperature to the maximum value and hold

for 15s to switch to °F.

If the current temperature unit is °F, adjust setpoint temperature to the minimum value and hold for

15s to switch to °C.

°F/°C switching (only valid for part of models)

Inhaltsverzeichnis

Sprachen:

Andere Haier Controller Handbücher

Haier

Haier QACT17A Bedienungsanleitung

Haier

Haier YCZ-A004 Bedienungsanleitung

Haier

Haier YCZ-A001 Benutzerhandbuch

Haier

Haier QACT17A Bedienungsanleitung

Haier

Haier QACT17A Bedienungsanleitung

Haier

Haier RWV05 V2 Bedienungsanleitung

Haier

Haier YR-E20 Bedienungsanleitung

Haier

Haier YR-E17A Bedienungsanleitung

Haier

Haier YCZ-A004 Bedienungsanleitung

Haier

Haier HW-WA101DBT Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch