Haier HF-299 Bedienungsanleitung

Model HF-299

Domestic Refrigerator

Operation Instructions

Contents

Name of various components

Placing environment

Usage preparation

Begin to use

Function introduction

Freezer usage instruction

Defrosting, cleaning, and stopping use

Question solution, after-sales service

1-2

5-6

8-9

10-11

12-13

○○○○○○

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

○○○○○○○○○○○○○○○○○

○○○○○○○○○○○○○○○○○○○○○○○

○○○○○○○○○○○○○○○○○○○○○○

○○○○○○○○○○○○○○○○○○○○○○○○○○○○

○○○○○○○○○○○○○○

○○○○○○○

○○○○○○○○○○○○○○○○○○○

The names of various components

Due to product modification, your purchased Haier refrigerator may not be identical with

the one shown in the manual. We hereby express our apologies to you for this possible

difference.

Main panel

Drawers2

Drawers1

10cm

Placing environment

The refrigerator should be placed on even, solid ground. When it is necessary to make it level

by insert something to raise it, the insert chosen should be steady, hard, and incombustible. It is

absolutely prohibited to use package foam block of the appliance as the insert. If it is not level,

you can make it level by turning and adjusting the bottom foot of the refrigerator.

It should be located in a well-ventilated

place, and there should be at least 10cm of

free space surrounding the refrigerator

including its back.

Refrigerator should be kept far from heat

source and avoid direct sunshine.

Be sure not to put in such a cold environment

as to freeze water Do not place it in area damp or susceptible

to be splashed with water.

Usage preparation

Remove all package parts

Including foam base and the adhesive tape fixing

accessories, they all must be removed to prevent

the appliance being placed uneven.

Check accompanying accessories and

document

Check the items inside the package box with the

packaging list, and inquire selling shop, if any

discrepancy.

Locate the refrigerator on proper

place

(See section "placing environment")

It is advisable to carry out cleaning

prior to usage

(See latter section "cleaning" for its detailed

description)

Idle standing

After the appliance has been adjusted level, and

cleaned, let it remain idle for at least 30 minutes

before switching it on so as to ensure its normal

running.

Left/right door opening function

This product provides the function of left/right

door opening, so you can realize the function

of opening door from right side by the following

step according to actual necessity.

1. Dismantle three screws of lower door hinge

for later use.

2. Carefully move downward and take out the

door, and carefully put it aside.

3. Dismantle part①, install it on right

corresponding position, and tighten it.

4. Dismantle part③, and fix it in the left hole of

the lower hinge②.

5. Use tool such as wrench to dismantle upper

hinge axle④, and install it on right

corresponding position.

6. Take the door, and carefully install it over

the hinge axle④.

7. Install the three screws dismantle in step 1 to

the left lower door hinge②.

8. Dismantle the hole-cover of door handle for

later use.

9. Dismantle door screw cover and screw⑦, and

install door handle⑤on the right corresponding

position, then tighten it. Install the hole cover

taken in step 8 on the right side.

10. After completing installation of the door,

repeat opening and closing door for several

times, to ensure no abnormal noise, and tight

installation of all screws and hinge axles.

Usage preparation

！

Ｌ

Ｉ

Begin to use

1.Starting of the appliance

For the initial use of the freezer, it is required

to start it at least 3hours in advance of putting

food.

Switching on the appliance. When plugged in,

the appliance shall automatically be set to

position 3, and quick cooling to position 0, green

power light I shall be turned on, and at the same

time, red alarming light L shall be turned on

together with buzzing sound. Press the buzzer

can stop the buzzing sound. Green power light I

indicates whether the appliance is switched on

or not.

When the temperature of the appliance has been

lowered to required limit, green alarming light

L shall be automatically be turned off.

2.Appliance working method

You can set the appliance by selecting one of the two modes according to

necessity.

(1) Artificial intelligence mode: if no other special demand, we recommend you to use the

artificial intelligence. By pressing the artificial intelligence key to turn its indicating light on,

then the appliance shall automatically work.

(2) Manual adjusting mode: you can adjust and set the freezer temperature position according

to food storage necessity (such as for quick freezing). (See the following "temperature setting

and adjustment" in the later section of "function introduction").

No matter how ambient temperature changes, it

can maintain optimum refrigeration effect

without any other adjustment so long as you have

selected the artificial intelligence, giving you much

convenience.

Suggestion

Freezer Compartment Start

TEMP

SF F

℃

BC DF

IJK L M

Ｏ

Function introduction

Introduction of main panel

Power control

After switching on the appliance, green power light I on the above of power switchAshall be

turned on. In order to prevent misoperation, it is necessary to press key A for 3 seconds in

order to stop its power supply, then the indicating lights and display windows shall all be

turned off, it shall stop cooling. If pressing the power keyAagain, the appliance shall resume

working, and all indicating lights and windows shall all be turned on again.

Locking and release

After switching on, the appliance shall automatically enter a locking state, light J shall be

turned off; by pressing key B, the locking shall be released, and light J shall be turned on.

Artificial intelligence setting

Under the artificial intelligence state, the appliance shall automatically adjust temperature

control position according to the ambient temperature changes, without manual control. Press

key C, and light K shall be turned on to enter the artificial intelligence state. Then quick

freezing position is on 0 and it is impossible to set quick cooling.Also the temperature position

is impossible to be set. To stop the state, press key C continuously for 3 seconds. At this

moment, light K shall be turned off.

A. Power switch

B. Unlock button

C. Automatic mode

D. Buzzer cancel

E. Cold storage temperature increase

F. Cold storage temperature decrease

G. Freezer storage temperature increase

H. Freezer storage temperature decrease

E+F Temperature setting (after unlocking)

G+H Quick freezing button (unlocked

mode)

G+H Cold storage temperature indicator

button (locked mode)

I Power indicator

J Lock indicator

K. Automatic mode indicator

L. Over-temp warning indicator

M. Temperature indicator

N. Quick freezing indicator

O. Error indicator

Temperature setting and adjustment

Pressing the keys E+F at the same time for 3 seconds, current temperature setting position

shall flash. Then each pressing of (key E), the position shall be increased one position on

the current position. And for each pressing of (key F), position shall be lowered one step(

in the range of positions 1 to 7).

Over temperature alarming function

When the actual temperature sensed by freezing senor is higher than -5°C(excluding -5°C),

the over-temperature alarming light shall be continuously on, together with the sound of

buzzing. Press the buzzer release key D to release the buzzing, but the red over-temperature

indicating L shall be still on. When the temperature of the freezer is lowered to -5°C or lower,

the red over-temperature indicating light L shall be automatically turned off.

Power-off memory

The instantaneous working state at power failure shall be locked, and after power is restored

it will work according to the setting before the power failure.

Average temperature and malfunction display

Average temperature can be displayed only when locking indicating light is turned on. Pressing

the keys E+F at the same time, it is possible to display the instantaneous temperature of the

freezer.

Malfunction display:

(1) When there is malfunction in the environment sensor, the appliance shall be impossible to

enter artificial intelligence state, and shall display "F2".

(2) When there is malfunction on the freezing sensor, compressor shall enter the fixed cycle

of working for 20 minutes, then stop for 20 minutes and so on", but quick cooling function is

still effective, but over-temperature alarming shall be out of order, with display of "F1".

Quick cooling setting

The quick cooling function is designed to keep food nutrition value. It can make the food

become completely frozen within as short time as possible. By pressing keys G+H together

at the same time for 3 seconds, the previous quick cooling setting position indicating light

shall flash. At this time, for each pressing of (key G), it shall increase 1 position from its

previous position. And for each pressing of (key H), the position shall decrease by one

step(in the range of positions 0-2). When under the quick cooling state, after compressor has

cumulatively worked for some period of time, it shall automatically stop the quick cooling

state, t o resume quick cooling position 0.

Function introduction

Note: When quick cooling position is on 0, the position indicating

light shall flash 3 squares successively from left to right.

Ｈ

Ｇ

TEMP

SF F

Freezer usage instruction

Use freezer for those foods to be stored

for long time.

The temperature of freezer compartment can be

-18°C, or lower, and under such a low

temperature it can basically inhibit the growth

or reproduction of bacteria. So it is advisable to

store in this room those foods to be kept for long

time, but careful with shelf life indicated on the

food package.

Quick-freezing

Before putting a larger amount of fresh food in

the freezer compartment, it is possible to use its

quick freezing function (see the description of

"quick freezing" in the above section of "function

introduction"). But it shall not be necessary to

set the quick-freezing function for the foodstuff

whose weight is less than 1kg or the food that

has already been frozen.

Making ice cubes

Pour about 3/4 of the volume of the icebox of

water to put in the freezer compartment for

freezing

When taking out the icebox, be sure not to

use knife or other metal tool for picking.

Generally, it can be taken down by slight force.

After taking out icebox, put it in warm water for

a while, and turn it with hand to take out ice

cubes.

Key to freezing food

It is advisable not to put excessive amount of

fresh food in freezer compartment, preferably, not

exceeding freezing capacity of the appliance.

Hot food should be cooled to room temperature

before putting in the freezer compartment.

Food should be divided into small appropriate

portions, so as to make it easier to be frozen

completely, and also to better guarantee quality

at melting and cooking. It is advisable for each

portion not to exceed 2.5kg.

Freezer usage instruction

It shall be better to package the food prior to

freezing it, and the package surface should be dry

to avoid being frozen together. The package material

should be smell-free, airtight, watertight, non-toxic,

and pollution -free, to prevent food flavor

contamination or quality deterioration. It is

advisable to mark the freezing date, storage

permissible period and food name on package bags

according to different food's shelf life so as to avoid

exceeding the storage limit.

In principle, take out exact required amount of

food from freezer compartment for melting. Melted

frozen food can not be re-frozen again, unless it

has been processed into cooked food, otherwise its

eating quality shall be influenced.

Take care not to put bottled beer, or beverage in

the appliance to prevent frost crack.

Method for taking out drawer

Pull forward it as shown in the drawing, and then

slightly raise it to take it out.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Haier Kühlschrank Handbücher

Haier

Haier 16 Bedienungsanleitung

Haier

Haier HRF-288K Series Bedienungsanleitung

Haier

Haier HBM450WH1 Bedienungsanleitung

Haier

Haier HTF-540DGG7 Bedienungsanleitung

Haier

Haier HRZ-98AA Bedienungsanleitung

Haier

Haier HT18TS45SW Montageanleitung

Haier

Haier HR-138AR Bedienungsanleitung

Haier

Haier HRF-340H Bedienungsanleitung

Haier

Haier HR-175US Bedienungsanleitung

Haier

Haier HC17SG42RB Bedienungsanleitung

Haier

Haier HC17SF10R Bedienungsanleitung

Haier

Haier DW-40L92 Bedienungsanleitung

Haier

Haier H2R465SF Bedienungsanleitung

Haier

Haier HR-136 Bedienungsanleitung

Haier

Haier HBC-70 Bedienungsanleitung

Haier

Haier PRCS25E Series Installationsanleitung

Haier

Haier HF-108 Bedienungsanleitung

Haier

Haier HR-60FW Bedienungsanleitung

Haier

Haier HTR3619FN Series Bedienungsanleitung

Haier

Haier HRQ02WNA - 12-01 Bedienungsanleitung

Haier

Haier HR-138A Bedienungsanleitung

Haier

Haier HT SERIES Bedienungsanleitung

Haier

Haier HRF-265F Bedienungsanleitung

Haier

Haier HRF360TW Bedienungsanleitung

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

Stengel

Stengel KU 1101 A++ Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Samsung

Samsung RF323TE Bedienungsanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Frigidaire

Frigidaire FSC23R5DW9 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung