Haier HBF855TVE Bedienungsanleitung

Automatic Drum

Washing Machine

HBF1055TVE HBF855TVE

Table of Contents

Before using

Names of Parts---------------------------------inside front cover

Matters Needing Attention-------------------------------------1-3

Installation---------------------------------------------------------4-5

Control Panel--------------------------------------------------------6

Operational Functions-----------------------------------------6-7

Program Selection-------------------------------------------------8

Preparation----------------------------------------------------------9

Washing Methods--------------------------------------------10-11

Maintenance

Maintenance ------------------------------------------------------13

Trouble Shooting-------------------------------------------------14

Technical Specification---------------------------------- --------16

Wiring Circuit------------------------------------------------------15

During using

Other Function----------------------------------------------------12



Names of Parts

Table Cover

Program Knob

Operation Button

Drainage hose clip

Back plate

Packing bolt (3)

Washing Allocating box

Wash Door

Observing Glass Window

Drainage hose

Earth terminal

Power supply cable

Back plate screw (3)

Caution and Warning symbols

For your safety and to prevent damages to the washing machine, any

instructions in this manual with this "Stop" sign shall be strictly followed.

For your safety, any instructions in this manual with this "Warning" sign

shall be strictly followed.

This diagram may vary slightly with the layout of the washing machine you have just purchased due

to technical improvements.

Spin speed selector knob

Safety

1. A separate earthed socket is required

for the power supply. After installation of

the washing machine,the power plug

should be accessible during the normal

wash.

3. Fuses in the power circuit should be rated

for 15A. Refer to a washing machine techni-

cian or a Haier designated service point for

power cable replacement.

5. Do not use flammable detergent or dry

cleaning agent; do not use flammable

spray in close vicinity to the washing

machine; do not remove or insert the plug

in the presence of flammable gas.

2. Hold the plug and not the electric cable

when unplugging the washing machine.

4. For your safety, dry hands before touch-

ing the washing machine and wear appropri-

ate footwear .

6. The door of the washing machine will be-

come hot during the water heating process.

Avoid contact with the door during the heat-

ing process. For safety, keep children away

from the washing machine.

7. Do not allow children play with the packing materials after unpacking.

Matters Needing Attention

Use

9. Keep the door slightly open when the washing machine is not being used. Never cover the

machine with a plastic sheet.

4. Do not wash foam rubber or similar sponge

materials.

5. Before washing, do up zippers, buttons ,

laces and repair damaged areas,under-

wear or small articals should be placed

in the laundry bag or a pillowslip.

Do not wash clothes containing wire

frames.

6. Do not open the detergent box during

thewashcycle.

7. The door is fitted with a self-lock device and

will not open until 2~3 minutes after the wash-

ing machine stops. Do not force the door

open. Do not open the door when water level

reaches the port hole.

8. After washing, turn off the tap to prevent

leakage; unplug the washing machine

and wipe clean the lower part of the port

hole.

3. Never place heavy objects ,a heating

applianceor a water container on the top panel

of the washing machine.

Matters Needing Attention

As shown in figure1 remove all the packing materials

(including the foam base).

Fig 1

Remove the packing screws as shown in figure 2.

The packing bolts protect the appliance from shock during trans-

portation The steps below should be followed before using the

appliance,

1. Remove the rear panel of the washing machine;

2. Remove the three packing bolts from the rear panel of the wash-

ing machine,the rubber hose and then the shock absorption chan-

nel steel;

3. Reinstall the back plate;

4. Fill the holes left by the packing bolts with plastic plugs.

(Attention: the packing bolts and rubber hose should be kept in a

safe place for later use)

Adjusting the position of the washing machine .There are ad-

justable feet under the bottom of the washing machine. Before use,

the washing machine should be adjusted, as shown in figure 3, so

that it is level.

Installation

Upon opening of the package, water drops may be seen on

the plastic bag and the porthole. This in normal phenomenon

resultingfrom water test in the factory.

Fig 2

Fig 3

Connection of water inlet hose and washing machine

Waterdrainagehose

Connection of power supply

The height of the terminal of the water drainage

hose should be between 80cm-100cm, the water

drainage hose must be securely placed on the clip

on the back of the washing machine.

Use the water drainage support supplied as an

accessory for proper installation of the water drain-

age hose .fix the water drainage hose support with

waterproof sring.Do not use an excessively long wa-

ter drainage hose and contract the authorized tech-

nician if the water drainage hose needs to be

extended.the water drainage hose should not be ex-

tended more than250cm.(longer extension will result

in concurrent water inflow and outflow).The diam-

eter of the extension hose should be the same as

the original hose.

caution:water drainage hose must not be immersed

in water.the original and extension hoses should be

tightly connected .

Installation

Check the following items before connection to the power supply.

The socket conforms to the maximun power load(The maximum current load of the socket and

power supply cable should not be less than 15A).

Power supply voltage conforms to the required value.

The power supply socket and the plug of the washing machine compatible,if they are compat-

ible ,Refer to a washing machine technician or a Haier designated service point for power cable

replacement.The washing machine should be connected to an earth before use.

Supplementary earth cable should not be necessary if the socket is connected to the earth.

Supplementary earth cable should be installed on the upper back of the washing machine

andconnected to an earth if the power supply socket has no earth connection.

100cm

80cm

HOT

hot

Turn the knob at "0", then turn off the power and

turn the program knob for setting desired wash program.

The program knob will not rotate with the programmed washing

process.

SOAK PAUSE/START

EXTRA RINSE

CYCLE CELECTOR

MAX

NORMAL

LOW

SPIN

































MAX

NORMAL

LOW

SPIN

Spin speed selection knob

By turning this knob,the required spinning speed can be selected.

The maximum speed will vary when a different program is selected.

MODIFIERS

Operational Functions

Extra Rinse Button



Soak Button

Pause/Start Button

Press this button,the washing machine will not drain

before the final spin-drying cycle.a soaking cycle will

be started,and the inner drum will rotate once every 4

minutes(at both directions).If you want to spin the laundry,

press this button again ,the program will continue until it ends.

If press this button,an addtional rinse operation will

be activated before the softening cycle is reached.

When the electric cable of the washing maching is plugged

and a program is selected, after the washing spinning speed

function is set,lightly press this button,the operation will start.

During a wash cycle,press this button lightly,the operation will

pause.Press it again to resume operation.

Program Selection

Heavy

Prewash

Normal

Light

Delicate

Normal

Light

Delicate

Normal

Delicate

Normal

Delicate

Silk

Very heavy soil

Non-fade heavily soiled

woolen fabrics

Fading and medium

soiled woolen fabrics

Non-fade heavily soiled

silk fabrics

Fading and medium

soiled silk fabrics

End

Spin

Rinse

Quick

Medium-soiled lanudry

Fading and medium

soiled chemical fiber

Non-fade and medium

soiled chemical fiber

Non-fade heavily

soiled chemical fiber

Fading and medium

soiled cotton

Non-fade and medium

soiled cotton

Soiled cotton

Heavy soil

Program Setting Laundry Water

Temperature

Turn the program knob at "0" position and turn off the power. The wash

program ends and the washing machine stops operation.

NOTE: " " means softener liquid detergent canbe added when necessary.

" " means detergent can be added when necessary.

" " means no detergent can be added.

Hot

Warm

Cold

Warm

Andere Handbücher für HBF855TVE

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Haier Waschmaschine Handbücher

Haier

Haier XPB10-LA Bedienungsanleitung

Haier

Haier XPB60-CS Bedienungsanleitung

Haier

Haier HLP21E - Pulsator Wash With Tub Bedienungsanleitung

Haier

Haier HWM50-0566 Bedienungsanleitung

Haier

Haier HWM100-97 Bedienungsanleitung

Haier

Haier HW70-1482 Bedienungsanleitung

Haier

Haier GWT950AW Montageanleitung

Haier

Haier HNS1002A Kurzanleitung

Haier

Haier HWM65-0523K Bedienungsanleitung

Haier

Haier HWM138VA Bedienungsanleitung

Haier

Haier HWM60-78 Bedienungsanleitung

Haier

Haier 39 Series Bedienungsanleitung

Haier

Haier HWM85-9288 Bedienungsanleitung

Haier

Haier HWX8040DW1 Bedienungsanleitung

Haier

Haier GWT 450 AW Bedienungsanleitung

Haier

Haier HW120-B14686-F Bedienungsanleitung

Haier

Haier W-465 Bedienungsanleitung

Haier

Haier XPB68-114D Bedienungsanleitung

Haier

Haier HWM 80-200 S Bedienungsanleitung

Haier

Haier B1000TX Bedienungsanleitung

Haier

Haier RWT360BW Bedienungsanleitung

Haier

Haier slim3 Bedienungsanleitung

Haier

Haier HM1000T Bedienungsanleitung

Haier

Haier HWMSP60 Bedienungsanleitung

Beliebte Waschmaschine Handbücher anderer Marken

Tricity Bendix

Tricity Bendix AW 1000 W Produkthandbuch

Panasonic

Panasonic NA-F60L5WRB Bedienungsanleitung

GE WSLP1500 Handbuch

Electrolux

Electrolux EWF1284EDW Bedienungsanleitung

LG TV2516DV3B Bedienungsanleitung

LG TH2517DSAV Bedienungsanleitung

VESTEL

VESTEL CMH-XL 7510 TE Bedienungsanleitung

AEG

AEG 74335 Bedienungsanleitung

Johnson

Johnson JWF721A Bedienungsanleitung

Beko

Beko WTE7604XLW0 Bedienungsanleitung

Danby

Danby DTT100A1WDB Montageanleitung

Amica

Amica WA 14 Ex Bedienungsanleitung

Daewoo

Daewoo DWD-F1222 Bedienungsanleitung

Bosch

Bosch WAS28461AU Bedienungsanleitung

Miele

Miele PW 6080 Vario Bedienungsanleitung

Finlux

Finlux FLX108CF220 Bedienungsanleitung

Whirlpool

Whirlpool 3LBR5132AN0 Bedienungsanleitung

Beko

Beko WKB 51231 PTMA Bedienungsanleitung