Haier HWM50-18 B Bedienungsanleitung

Haier Fully Automatic Washing Machine

User's manual

This manual is for

HWM50-18 B

Please read this manual

carefully before using.

Retain it for future reference.

Specifications.....................................................................................the 2nd cover

Names of the parts................................................................................................1

Safety precautions .............................................................................................2

Installation and adjustment ...................................................................................4

Preparation before washing .................................................................................8

Put in the laundries ..............................................................................................9

Usage of the detergent ........................................................................................9

Use the operation buttons ..................................................................................10

Close the top lid .................................................................................................14

Finish washing ....................................................................................................14

Disposal after washing .......................................................................................15

Trouble shooting Answer to questions.............................................................16

Packing list .........................................................................................................17

Specifications

Contents

Water level/Water

quantity ( )

Water inlet pressure 0.03MPa-0.78MPa

Rated washing /

spinning capacity(kg)

5.0 (weight of standard dry cloth)

1/17 2/20 3/23 4/27 5/30

6/33 7/37 8/41 9/44 10/47

Meaning and description of the symbols

Names of the parts

Warning sign

Forbidden sign

Contents marked with that symbol are related to the safety

of the product and the personal safety of the users. Please

operate in strict conformity to the contents, otherwise it may

cause damage of the machine or injure the personal safety

of the user.

Contents marked with that symbol are actions forbidden to

perform. Performing of those actions may result in damage

of the machine or injure the personal safety of the user.

Handle

Water inlet valve

Water absorption

cushion

Block cover

(do not dismantle)

Power cord

Drain hose hang-

ing hole

Drain hose

Back cover

Top lid

Detergent box

Control panel seat

Location for

up lint filter

Inner tub

Control panel film

Pulsator

Cabinet

Access for

liquid bleacher

Down lint filter

Adjustable foot

Fixed foot

Adjustable foot label

Safety precautions

Do not damage the power cord, bend ,extend, twist, bind or alter it by force. Do not press

or nip it with weight. If the power cord or the power plug is bad, or the power plug

becomes flexible, to avoid risk it is required to have it replaced by

the technicians of our special shop or the after-sale

service department. Keep the pin of the power plug

clean, if the power plug is polluted with dust, please

wipe with dry cloth carefully.

The power cord plug should be convenient

to be plugged in or plugged out with hand

while the washing machine runs normally.

Be sure to pull the plug out and close the

water tap when the machine is idle, when

moving the machine, or when cleaning

the machine. Do not use wet hand to ins-

ert or pull out the power plug.

In case the washing machine is installed

on ground with carpet, do not block the

ventilation hole with carpet.

Do not let the machine share one receptacle with other

electric appliances. If the power plug is damaged, or

the plugging into the receptacle is loose,

do not use the plug any more.

Do not wash water-proof laundries like

the raincoat, bike covers etc. to avoid

abnormal vibrations in spinning.

Do not use water hotter above 50 C .

Do not put the machine at damp place like

the bathroom. Never wash it with water.

Not put wet laundries on the control panel.

Please plug the plug on special 220V AC

receptacle. Be sure to use single-phase

tow pins receptacle. Ensurethe earthing

prong of the power receptacle is earthed

reliably. Use leakage protector if possible.

Carpet

The ventilation holes

at the bottom

Safety precautions

Do not decompose, repair or alter the

machine by yourself.

Do not put any hot or heavy items (such

as the kettle with hot water ) on the

washing machine.

Do not wash laundries with volatile

materials (such as thinner, petrol etc.)

The handicapped or children without

care shall not use the machine.

Keep the machine away from direct

sunlight and heat source like the heater.

Do not stretch hands into the working

machine. It is dangerous even if the

rotation is slow. Take special care of

the children. Do not let the children

climb the washing machine.

Petrol

Thinner

Installation and adjustment

The largest allowed slope of the

shank base of the machine is 2 .

The slanting or rough ground will

result in unstable running or

stoppage of the machine. Please

adjust it with following methods:

Adjust the adjustable foot:

Install the bottom plate

Adjust the installation position

Please install and adjust the machine according to the requirement of the manual. It is

very important to your security and correct operating the machine.

1.To twist the adjustable foot, please

first lift up the side of the foot slightly,

loosen the adjustable nut, and twist

the foot.

2.Fasten the nut after adjustment.

Loosen Fasten

High Low

adjustable nut

adjustable foot

After you open the package, please lean the

washing machine gently down on soft items

( like the towel cloth, blanket, etc. ). Install the

bottom plate to the bottom of the machine with

the eight screws by a cross screwdriver,

then lift the machine up gently. See to the figure:

Screw

Front

Bottom plate

Soft items

Back

1.The height of the drain hose shall be

less than 10cm, or the drainage will not

be smooth, and cost such long time that

the machine may stop at mid way.

2.Do not trample or press the drain hose.

If the drain hose is too long, cut it at mid

point. To make smooth drainage, cut the

front end of the hose slantingly.

4.If extra drain hose is needed, please

make separate purchase. The inner

diameter of the extra hose shall not

less than 30mm, and the length shall

not exceed 1.5m.

If the extra hose is too long, cut it

either atA or at B point.

How to change the direction of the drain hose

Usage of the drain hose

The drain hose shall drain smoothly

1.Dismantle the back cover of the washing machine.

3.Dismantle the protecting cover of the drain outlet

at the other side (method the same as the bushing).

Install the bushing as per indicated in Figure 4.

4.Extend the drain hose from the other side. Fix the

drain hose onto the base frame with the drain hose

frame. (As indicated in Figure 5)

5.Install the protecting cover of the drain outlet

at the other side as per indicated in Figure 6.

Drain outlet

protecting cover

Drain hose bushing Drain hose bushing

Figure 1

Figure 4 Figure 5

Figure 6

Drain hose

bushing

Take off

Drain hose

bushing claw

Cabinet Figure 2

Figure 3

Inner

Press

Outer

2.Put down the drain hose. Take off the drain

hose frame. As indicated in Figure 1, put the

drain hose into the cabinet. Then stretch one

hand into the cabinet to nip the claw of the

drain hose bushing to remove the claw from

original position. Take off the drain hose

bushing with the other hand. (As indicated in

Figure 2 and 3).

Drain hose frame

Outer

drain

hose

Attention: To guarantee the proper installation, it is suggested to have the direction changing of drain

hose performed by the after-sales service technicians of our company.

Water tap,suitable Water tap,not suitable

It is required that the front end shall belonger than 10mm.

The outlet endsurface of the tap shall be flat and smooth.If not please file it to

avoid leakage.

3.Loosen the screw till the water tap can be accessed. Put the jointer of the water

inlet hose on the tap. See to Figure 2. (If the tap diameter is too large and the jointer

can not be set on the water tap, please loosen the four screws and take out the

bushing in the jointer. See to the figure3.)

2.Press the lower end of the lock lever and push down the slider. Take off the water

inlet hose jointer from the water inlet hose component. See to Figure 1.

Remarks: Before twisting the fastening nut, the thread is 4mm above the

upper surface ofthe nut.After twisting the fastening nut,the thread is2mm

above the upper surface of the nut. See to Figure 6.

5.Take off the nameplate. Twist the fastening nut as per the indication of the figure.

See to Figure 5.

4.Fasten the four screws evenly. See to Figure 4.

>10mm

Outlet end surface

Nut

About 4mm before twisting

About below 2mm after twisting

Screw

Screwdriver Mark label bushing

Figure 2

Figure 5

Figure 1

Figure 4

Figure 3

Figure 6

Slider

Water inlet pipe jointer

Water inlet pipe

Locking lever

Install the water inlet hose

Confirm the water tap

Connection between the water inlet hose jointer and

the water tap

1.Use the new water inlet hose provided with the machine to connect to the water

faucet. Old hose sets should not be reused.

1.Do not takeoff the water absorption

cushion. Please checkif the cushion

is dropped ordamaged before each

usage. If ithappens please contact

our after-sale departmentimmediately.

2.Put the nutof the waterinlet hose on

the valve jointer.

3.Fasten the nut.Swaying it gentlyto

confirm if it'ssuitable.

1.Close the water tap.

2.Press the locking lever. Push down the slider. Then

pull off the water inlet hose. If the machine is used

more than once every week, the jointer of the water

inlet hose can be kept on the tap to prevent

damaging the fixing screw.

1.Push down theslider. Insertthe

water inlet hoseinto the jointer.

2.Hang the locklever to thejointer.

Release the slidertill a click

sound is heard.

Locking lever

Slider

Water absorption cushion

Nut of the water inlet hose

Jointer of thewater inlet valve

Slider

Jointer of thewater

inlet hose

Locking lever

Connection between the water inlet hose and the

washing machine

Connection between the jointer of the water inlet

hose and the water inlet hose

Check the connection between the jointer of the

water inlet hose and the water tap

Take down the water inlet hose

1.Swaying the hose gently to confirm if it is fastened

stable.

2.After installation, openthe tap tocheck if it leaks.

3.Do not bend the hose with overstrain.

4.Before each usage please check if

the connection between the jointer

of the water inlet hose and the water

tap, and the installation of the

water inlet hoseare firm, soas to

prevent dropping from improper

Preparation before washing

Confirm if

there's special

requirment for

the laundries.

Clear the pocket.

Take out the

coins , sand,

hairpins etc.

Fasten the

buttons and

zippers.

When the pulsator

is running , the

buttons of the

laundries may

cause noise. For

the sake of

discretion,please

put the laundries

with buttons into

other laundries.

Preparation before washing

1.Connect the water inlet hose and open

the water tap .

2.Confirm that the washing machine is

earthed reliably . Then insert the power

plug into the receptacle. Do not connect

the earth terminal to the gas pipe and

tap water pipe.

3.Put down the drain hose.

The quantity of

the laundries

shall not exceed

the rated value.

The big laundries

like the jeans

shall be put in

loosely.

Pay attention to followings before washing the laundries

A.Please check if the laundries are applicable for washing.

b.Separate those not colorfast from other laundries.

c.For laundries not water absorbing, please put them into water with hands.

d.For laundries with much soil, please remove the soil first. You can add detergent on the

part with serious soil directly. It is much easier to remove the soil by that mean.

e.For laundries likely to get lint ball or with long fiber, please first turn the inside out before

putting them into the water.

f.Do not put the laundries polluted with chemicals directly into the washing machine.

Inhaltsverzeichnis

Andere Haier Waschmaschine Handbücher

Haier

Haier HWM75-1279 Bedienungsanleitung

Haier

Haier HMS1460B Bedienungsanleitung

Haier

Haier HBF1255TVE Bedienungsanleitung

Haier

Haier HK1270TVEME Bedienungsanleitung

Haier

Haier HWM85-9288 Bedienungsanleitung

Haier

Haier HWM60-10866 Bedienungsanleitung

Haier

Haier XQS60-78H Bedienungsanleitung

Haier

Haier HWM100-99VGS Bedienungsanleitung

Haier

Haier HW60-1203D Bedienungsanleitung

Haier

Haier HLP21N Bedienungsanleitung

Haier

Haier HW80-B14266A-EC Bedienungsanleitung

Haier

Haier HW80-BD14979U1 Bedienungsanleitung

Haier

Haier hW80-1401B-u Bedienungsanleitung

Haier

Haier XPB65-LAP Bedienungsanleitung

Haier

Haier HW90 Bedienungsanleitung

Haier

Haier HW90-B14636 Bedienungsanleitung

Haier

Haier XPB60-111S Bedienungsanleitung

Haier

Haier HWMSP60 Bedienungsanleitung

Haier

Haier HLP24E Bedienungsanleitung

Haier

Haier HW80-IM12826TNZP Bedienungsanleitung

Haier

Haier HWM120-01A6 Bedienungsanleitung

Haier

Haier HWM130-113S Bedienungsanleitung

Haier

Haier XQG50-600SW Bedienungsanleitung

Haier

Haier HLP21E - Pulsator Wash With Tub Bedienungsanleitung

Beliebte Waschmaschine Handbücher anderer Marken

Tricity Bendix

Tricity Bendix AW 1000 W Produkthandbuch

Panasonic

Panasonic NA-F60L5WRB Bedienungsanleitung

GE WSLP1500 Handbuch

Electrolux

Electrolux EWF1284EDW Bedienungsanleitung

LG TV2516DV3B Bedienungsanleitung

LG TH2517DSAV Bedienungsanleitung

VESTEL

VESTEL CMH-XL 7510 TE Bedienungsanleitung

AEG

AEG 74335 Bedienungsanleitung

Johnson

Johnson JWF721A Bedienungsanleitung

Beko

Beko WTE7604XLW0 Bedienungsanleitung

Danby

Danby DTT100A1WDB Montageanleitung

Amica

Amica WA 14 Ex Bedienungsanleitung

Daewoo

Daewoo DWD-F1222 Bedienungsanleitung

Bosch

Bosch WAS28461AU Bedienungsanleitung

Miele

Miele PW 6080 Vario Bedienungsanleitung

Finlux

Finlux FLX108CF220 Bedienungsanleitung

Whirlpool

Whirlpool 3LBR5132AN0 Bedienungsanleitung

Beko

Beko WKB 51231 PTMA Bedienungsanleitung