Hall Research Technologies UH-1C Bedienungsanleitung

Model UH-1C

HDMI™ Re-clocking Extender

Extends HDMI™ Audio Video to 200ft on 1 Cat6 Cable or farther

by Daisy Chaining Units Together!

UMA1163 Rev. C

For technical support, Call 714-641-6607 or fax 714-641-6698

Order by phone: toll-free in the U.S. 800-959-6439

Web site: www.hallresearch.com

Hall Research, 1163 Warner Ave. Tustin, CA 92780

SUPPORT &

ORDERING

INFORMATION

Model UH-1C

1. Introduction

1.1 General

Hall Research’s Model UH-1C is the latest member of the Hall Research’s popular and powerful

Mini-CAT® video extension and distribution product line. The UH-1C is used to extend HDMI™

audio/video signal to 200ft @ 1080i/720P or 150ft @ 1080p on 1 Cat6 cable. Quality Cat5e cables

can also be used, however when Cat5e is used the maximum distances are reduced by about

33%. Cables that are of lower quality and construction will also reduce the maximum distance.

The UH-1C supports HDMI™ version 1.2a and is compatible with version 1.3. Two power supplies

are needed for each Sender/Receiver pair. The remote receiver re-aligns the pixel clock and

generates a clean pixel clock for the display, thereby taking out any skew that may have been

induced in the cable.

The Re-clocking feature of the UH-1C allows the units to be daisy-chained together to extend the

video and audio even farther!

This means that you can achieve extremely long distances (for example, with 2 units you can

extend 1080i/720P to 400 ft and farther by adding more units!).

The unit is housed in a compact sturdy metal enclosure measuring 4.625 x 2.75 x 1.25 inch with

mounting flanges and includes a power supply.

Figure 1 – Block Diagram

HDMI™ Re-clockin

Extende

1.2 Features

Use Cat5e or Cat6 cables to extend pure digital high definition HDMI™ audio video signals

Can drive cables to 200ft @ 1080i/720P or 150ft @ 1080p on 1 Cat6 cable

Supports DVI-D single link extension with optional adapter cables

Two power supplies needed for the setup

Re-aligns the pixel clock and generates a clean pixel clock for the display

HDCP compliant

Daisy-chainable to achieve longer distances

Compact metal enclosure measuring 4.625 x 2.75 x 1.25 inch with mounting flanges

Includes universal power supplies

2. Installation

Refer to figure 1 above. Place the sender by the video source. Use a quality HDMI™ cable to

connect the source to the sender (the cable is not included and must be purchased separately).

Use 1 Cat6 cable to connect the sender to the receiver observing the length limitations. Connect

the cable to the receivers RJ45 output and finally using a quality HDMI™ cable; connect the

receiver to the output display device.

Turn on the display and the video source and plug in the power supplies (included) into both the

sender and receiver.

† For HDMI™ compliance, if the input has HDCP content protection, the display must also be

HDCP compliant (such as a display with HDMI™ input) otherwise no image will be shown on the

display.

TRADEMARKS USED IN THIS MANUAL

Hall Research and HR (logo) are trademarks of Hall Research Technologies Inc. HDMI™ is a

registered trademark of HDMI Licensing LLC

Any other trademarks mentioned in this manual are acknowledged to be the property of the

trademark owners.

Model UH-1C

Note about Twisted-Pair Cables

The UH-1C is designed for operation with standard Cat6 cables (TIA/EIA 568B wiring). You

can use Quality Cat5e cables also if the distance between sender and receiver is 70 ft or

less. Shielded Cat6 can also be used; in fact, shielded Cat6 offers the best performance

and provides immunity to external noise if the installation is in an electrically noisy

environment. Avoid using Zero-skew or low skew cables. The low skew cables work well for

analog video extension over twisted pair, but since the UH-1C is a pure digital system, the

cross-talk of the low skew cables will actually shorten the maximum achievable cable

length.

3. Troubleshooting

There are no field serviceable parts or circuits in the device. If you think that the device is

malfunctioning, please first try the following steps:

Check the video connections

Unplug the power supplies and re-attach them

The POWER LED at the Receiver is ONLY LIT during an active video connection.

oIt DOES NOT indicate the unit is powered

Connect the display directly to the source and make sure you can get a picture without the

extender. If so then using the menus of the video source try to set the output resolution to

a low one (such as 480p) to start with. Insert the extender and verify that you get an

image, if so; then set the resolution to the next higher value (such as 720p). Continue this

process until you get the highest possible resolution without loss of image or audio.

The quality of the cable and the connections will determine the maximum length and

resolution achievable. Certain types of cable may be able to show the video, but the audio

will not be heard.

3.1 Contacting Hall Research

If you determine that your extender is malfunctioning, do not attempt to repair the unit. The unit

contains no user serviceable equipment. Opening the unit will void the warranty. Contact the Hall

Research Technical Support Department at 714-641-6607 to obtain a RMA (Return Authorization)

number.

Before you do, make a record of the history of the problem. We will be able to provide more

efficient and accurate assistance if you have a complete description.

3.2 Shipping and Packaging

If you need to transport or ship your extender:

• Package it carefully. We recommend that you use the original container.

• Before you ship the units back to Hall Research for repair or return, contact us to get a

Return Authorization (RMA) number.

HDMI™ Re-clockin

Extende

4. Specifications

Supported video formats:

Resolution DVI /

HDMI™

480i/576i

480p/576p

720p@(60/50)

1080i@(60/50)

1080p@(60/50)

VGA@(60/72/75/85)

SVGA@(56/60/72/75/85)

XGA@(60/70/75/85)

SXGA@(60/75/85)

UXGA@60

WXGA@60(1280X800)

WSXGA@60(1680X1050)

WUXGA@60(1920X1200)



Dimensions: 4.625 x 2.75 x 1.25 inch

Weight: 0.77 Pounds (350 g)

Input Power: 5v DC at 2A max. (Nominal operation current = 1A)

Operating

Temperature: 0 to 70 degrees C

Storage

Temperature: -10 degree C to 80 degrees C

1163 Warner Ave., Tustin, CA 92780

Ph: (714)641-6607, Fax: (714)641-6698

Inhaltsverzeichnis

Andere Hall Research Technologies Extender Handbücher

Hall Research Technologies

Hall Research Technologies UH18 Series Bedienungsanleitung

Hall Research Technologies

Hall Research Technologies ECHO Series Bedienungsanleitung

Hall Research Technologies

Hall Research Technologies HR-733 Bedienungsanleitung

Hall Research Technologies

Hall Research Technologies ULTRA-4K Series Bedienungsanleitung

Hall Research Technologies

Hall Research Technologies U3CAT6 Series Bedienungsanleitung

Hall Research Technologies

Hall Research Technologies EMX-DVI Betriebsanleitung

Hall Research Technologies

Hall Research Technologies EX-HDMI-2A Bedienungsanleitung

Hall Research Technologies

Hall Research Technologies U97-H2 Bedienungsanleitung

Hall Research Technologies

Hall Research Technologies GEM-EX Bedienungsanleitung

Hall Research Technologies

Hall Research Technologies VERSA-4K Series Bedienungsanleitung

Hall Research Technologies

Hall Research Technologies UH-2C-3S Bedienungsanleitung

Hall Research Technologies

Hall Research Technologies U97-ULTRA Bedienungsanleitung

Hall Research Technologies

Hall Research Technologies U97-ULTRA-2B Bedienungsanleitung

Hall Research Technologies

Hall Research Technologies U22-160 Bedienungsanleitung

Hall Research Technologies

Hall Research Technologies Mini-Cat UH1-BT Bedienungsanleitung

Hall Research Technologies

Hall Research Technologies UH-2C Bedienungsanleitung

Hall Research Technologies

Hall Research Technologies UHBX-8X Bedienungsanleitung

Hall Research Technologies

Hall Research Technologies ULTRA-4K Series Bedienungsanleitung

Hall Research Technologies

Hall Research Technologies UD2A-EDID Bedienungsanleitung

Hall Research Technologies

Hall Research Technologies UH-1D Bedienungsanleitung

Hall Research Technologies

Hall Research Technologies FXT-460 Bedienungsanleitung

Hall Research Technologies

Hall Research Technologies UV-1 Bedienungsanleitung

Hall Research Technologies

Hall Research Technologies U22-160-DP Bedienungsanleitung

Hall Research Technologies

Hall Research Technologies SP-DVI-2A Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung