Hama 00137423 "MyVoice3000" Bedienungsanleitung

137423

Bluetooth-Headset

Operating Instructions

Bedienungsanleitung

Mode d‘emploi

Instrucciones de uso

Instrukcja obsługi

“MyVoice3000”

C D

Controls and Displays

1. Multi-Function Key

2. Status LED

3. Volume Control (-)

4. Lautstärkeregler (+)

5. Charging Socket

6. Microphone

Thank you for choosing a Hama product.

Take your time and read the following instructions and information

completely. Please keep these instructions in a safe place for

future reference. If you sell the device, please pass these operating

instructions on to the new owner.

1. Explanation of Warning Symbols and Notes

Warning

This symbol is used to indicate safety instructions or to draw your

attention to specic hazardås and risks.

Note

This symbol is used to indicate additional information or

important notes.

GOperating instruction

2. Package Contents

•1x MyVoice3000 Bluetooth headset

•1x USB charging Cable (B)

•1x Ear Hook (C)

•3x Ear pads (D)

•These operating instructions

3. Safety Notes

•The product is intended for private, non-commercial use only.

•Protect the product from dirt, moisture and overheating, and only

use it in a dry environment.

•Do not allow yourself to be distracted by the product, for example

when driving a vehicle or operating sports equipment. Always pay

attention to the surrounding trac and your environment.

•Do not drop the product and do not expose it to any major

shocks.

•Do not operate the product outside the power limits given in the

specications.

•Do not open the device or continue to operate it if it becomes

damaged.

•Since the battery is integrated and cannot be removed, you will

need to dispose of the product as a whole. Do this in compliance

with the legal requirements.

•Dispose of packaging material immediately according to locally

applicable regulation.

•Do not modify the product in any way. Doing so voids the

warranty.

Warning – Rechargeable battery

•Only use suitable charging devices or USB connections for

charging.

•As a rule, do not charge devices or USB connections that are

defective and do not try to repair them yourself.

•Do not overcharge the product or allow the battery to

completely discharge.

•Avoid storing, charging or using batteries in extreme

temperatures.

•We suggest to fully charge the item for at least one time in

two months

4. Getting Started

•The headset is equipped with a rechargeable battery. The battery

must be fully charged before using the device for the rst time.

•Ensure that the headset is switched off before charging it.

•Begin charging by connecting the included USB charging cable

to the charging socket (5) as well as to the USB connection

of a PC/laptop.

•Alternatively, you can charge the headset using a suitable USB

charger. Please refer to the operating instructions for the USB

charger used.

•The status LED (2) lights up constantly in red during the charging

process.

•Charging the battery fully may take up to 2 hours.

Warning

Do not use the headset while it is charging.

•When the battery is fully charged, the status LED (2) remains

lit blue.

•Disconnect all cable and mains connections after use.

Note

If you have not used the item for a few month, it may take 15-30

minutes for the status LED (3) to red when charging.

5. Operation

Switching the headset on/off

•Turn On:

With the device off, press and hold the multifunction button (1)

for 3 seconds until you hear a voice. The status LED (2) ashes in

blue three times. The voice announces the battery charge by the

amount of talking time remaining.

Remaining talking time Voice announcement

> 3,75 h„Battery high“

3,75 h – 0,75 h„Battery medium“

< 0,75 h„Battery low“

•Turn Off:

With the device on, press and hold the multifunction button

(1) for 5 seconds. The status LED (2) ashes red twice before the

device turns off.

The rst time the device is turned on, pairing is automatically started

– see 5.1 Bluetooth pairing.

5.1. Bluetooth pairing

Note – Pairing

•Make sure that your Bluetooth-capable terminal device is on

and Bluetooth is activated.

•For more information, please refer to the operating

instructions of your terminal device.

•The headset and the terminal device should not be any further

than 1 metre away from each other. The smaller the distance,

the better.

•Ensure the headset is off.

•Press and hold the multifunction button (1) for approx. 8

seconds until the status LED (2) begins to alternate red and blue.

The headset is searching for a Bluetooth connection.

•Open the Bluetooth settings on your terminal device and wait until

MyVoice3000 appears in the list of Bluetooth devices found.

•Bluetooth devices found.

•Select MyVoice3000 and wait until the headset is listed as

connected in the Bluetooth settings on your terminal device.

Note – Bluetooth password

If your terminal device requests a password to establish the

connection, enter 0000.

Note

If pairing was successful, the status LED (2) lights up in blue for

about 2 seconds. A short signal tone sounds and a voice says,

“Your phone is connected”.

•You can now use the headset.

5.2. Automatic Bluetooth connection

(after successful pairing)

Note

•Make sure that your Bluetooth-capable terminal device is on

and Bluetooth is activated.

•For more information, please refer to the operating

instructions of your terminal device.

•Make sure that the headset is switched on.

•After the headset and terminal device have been paired, a

connection is established automatically.

•You can now use the headset.

Note

•If pairing was successful, the status LED (2) lights up in blue

for about 2 seconds. A short signal tone sounds and a voice

says, “Your phone is connected”.

•It may be necessary to change the settings on your terminal

device to enable it to automatically connect to the paired

headset.

Hinweis - Connection impaired

After the headset and terminal device have been paired,

a connection is established automatically. If the Bluetooth

connection is not established automatically, check the following:

•Check the Bluetooth settings of your terminal device to see

whether MyVoice3000 is connected. If not, repeat the steps

listed under 5.1 Bluetooth pairing.

•Check whether obstacles are impairing the range. If so, move

the devices closer together.

•The performance can also be affected by a weak battery.

5.3. Multi-pairing

•The headset can be paired with two terminal devices at once so

that, for example, you can use a private and a business mobile

phone simultaneously.

•To begin with, activate Bluetooth only on the rst terminal device

that you wish to pair.

•Pair the rst terminal device with the headset as described in 5.1

Bluetooth Pairing.

•Switch off the headset as described in 5 Operation (Switching

off).

•Activate Bluetooth on the second terminal device.

•Press and hold the multifunction button (1) for approx. 8

seconds until the status LED (2) begins to alternate red and blue.

The headset is searching for a Bluetooth connection.

•Continue as decribed in 5.1 Bluetooth Pairing.

•Once the second terminal device is connected, open the Bluetooth

settings on the rst terminal device and select MyVoice3000.

•Now both terminal devices are connected to the headset.

5.4. Hands-free function

Note

•Note that support for certain key functions may vary

depending on your terminal device.

•For more information, please refer to the operating

instructions of your terminal device.

Making a call

•Dial the number directly on your terminal device to make a call.

Voice-activated dialing

•Please check if your mobile phone supports voice dialing function.

•Press and hold the multifunction button (1) for approx. 3

seconds

•The mobile phone’s voice control will be activated.

•Start a call as described in your mobile phone’s operating

instructions.

•Say the name of person you wish to call.

•If the voice tags are paired to the related phone number stored in

your mobile phone, the number will be dialed.

Inhaltsverzeichnis

Sprachen:

Andere Hama Headset Handbücher

Hama

Hama BSH-220 Bedienungsanleitung

Hama

Hama BTH-170 Bedienungsanleitung

Hama

Hama MyVoice2100 Bedienungsanleitung

Hama

Hama BSH-220 Bedienungsanleitung

Hama

Hama BSH-180 Bedienungsanleitung

Hama

Hama Micro Bedienungsanleitung

Hama

Hama Arrow Bedienungsanleitung

Hama

Hama Duo-Stereo 00104807 Bedienungsanleitung

Hama

Hama Triton Bedienungsanleitung

Hama

Hama 00104803 Bedienungsanleitung

Hama

Hama Triton Bedienungsanleitung

Hama

Hama Hybrid BT Bedienungsanleitung

Hama

Hama Mini Bedienungsanleitung

Hama

Hama 00051826 Bedienungsanleitung

Hama

Hama Tattoo Bedienungsanleitung

Hama

Hama MyVoice1000 Bedienungsanleitung

Hama

Hama Nugget 810 Bedienungsanleitung

Hama

Hama MyVoice1000 Bedienungsanleitung

Hama

Hama MyVoice700 Bedienungsanleitung

Hama

Hama 87552 Bedienungsanleitung

Hama

Hama BSH-150 Bedienungsanleitung

Hama

Hama Speed Bedienungsanleitung

Hama

Hama Tour ANC Bedienungsanleitung

Hama

Hama EasyLine MBH-300 Bedienungsanleitung

Beliebte Headset Handbücher anderer Marken

Sena

Sena SMH10 Bedienungsanleitung

IASUS

IASUS Stealth IA-NT4-BASIC-BT Bedienungsanleitung

Sennheiser

Sennheiser EPOS ADAPT 230 Bedienungsanleitung

GE 98971 Bedienungsanleitung

Plantronics

Plantronics Blackwire 3200 Series Bedienungsanleitung

Blue Tiger

Blue Tiger Advantage PLUS Bedienungsanleitung

Jawbone

Jawbone Icon Bedienungsanleitung

Jabra

Jabra FR 20 Bedienungsanleitung

Roxcore

Roxcore Flow A+ Bedienungsanleitung

Turtle Beach

Turtle Beach XP 510 Bedienungsanleitung

Philips

Philips SHB6101 Bedienungsanleitung

Jabra

Jabra PRO 9460 Duo Bedienungsanleitung

HyperX

HyperX HyperX Cloud Flight Bedienungsanleitung

Bose

Bose MIE2 Mobile Bedienungsanleitung

Jabra

Jabra Steel Bedienungsanleitung

HyperX

HyperX cloud ii Bedienungsanleitung

Southwing

Southwing SA505 Bedienungsanleitung

Blueant

Blueant X5i Bedienungsanleitung