HanaNet Plus Bedienungsanleitung
HanaNet Digital
Security
1
DVR SYSTEM (Plus Model)
User’s Manual
Manual Revision : Above version. 7.0
Release Date : June. 2006
HanaNet Digital
Security
2
Contents
Contents …………………………………………………………………………………………………………………..
Installing hardware and software ………………………………………………………………………………………
System requirements ………………………………………………………………………………………………..
Installing the video card in the PC ………………………………………………………………………………..
Installing the software ……………………………………………………………………………………………….
Main Screen ……………………………………………………………………………………………………………….
Overview of the live screen ………………………………………………………………………………………..
System Information(SYS-INFO) …………………………………………………………………………………..
Update History ……………………………………………………………………………………………………….
Sending an automatic e-mail ………………………………………………………………………………………
Message function …………………………………………………………………………………………………….
Controlling PTZ cameras ……………………………………………………………………………………………
Power down mode …………………………………………………………………………………………………..
Saving Configuration File …………………………………………………………………………………………..
Programming the DVR system [SETUP] ……………………………………………………………………………
Standard settings …………………………………………………………………………………………………….
Recording ……………………………………………………………………………………………………………..
Schedule ……………………………………………………………………………………………………………..
Motion …………………………………………………………………………………………………………………
Color Control …………………………………………………………………………………………………………
PAN/TILT setup ……………………………………………………………………………………………………..
Control User Access ……………………………………………………………………………………………….
Back Up ………………………………………………………………………………………………………………
WEBVA (IP Camera) ………………………………………………………………………………………………..
Search Screen ………………………………………………………………………………………………………….
Overview of the playback screen ………………………………………………………………………………..
Search bar …………………………………………………………………………………………………………..
Playback bar ………………………………………………………………………………………………………..
Event filters ………………………………………………………………………………………………………….
Date/time search …………………………………………………………………………………………………..
Zoom function …………………………………………………………………………………………………….. .
Views …………………………………………………………………………………………………………………
Live view …………………………………………………………………………………………………………….
2
4
4
4
4
5
5
6
7
7
7
8
9
9
10
10
16
19
20
20
21
22
24
27
29
29
30
30
30
31
31
31
31
HanaNet Digital
Security
3
Back Up …………………………………………………………………………………………………………….
Smart Search ………………………………………………………………………………………………………
Bookmark …………………………………………………………………………………………………………..
Network Connection [CLIENT] ……………………………………………………………………………………..
Client software …………………………………………………………………………………………………….
Direct recording(Save) ………………………………………………………………………………………..
Multi-server connections …………………………………………………………………………………….
Web Client …………………………………………………………………………………………………………….
Searcher ……………………………………………………………………………………………………………….
Installing the alarm I/O card ………………………………………………………………………………………..
POS function …………………………………………………………………………………………………………..
Connecting the POS box ……………………………………………………………………………………….
Setting up the POS box …………………………………………………………………………………………
Setup in the DVR software ……………………………………………………………………………………..
Analyzing transaction data ……………………………………………………………………………………..
31
33
33
34
34
35
35
36
36
37
38
38
39
40
41
HanaNet Digital
Security
4
Installing hardware and software
System requirements
Operating system : Windows XP
Hard disk : Min. 200 GB for accident prevention certification
Number of drivers required and special hardware requirements :
1 x video / 1 x audio Pentium 4, 2.4GHz, 512MB DDR-RAM, 200GB HDD9100P ~ 9400P
1 x video / 1 x audioPentium 4, 2.4GHz, 256MB DDR-RAM, 200GB HDD4900P
4 x video / 4 x audioCeleron, 1.7GHz, 256MB RAM, 120GB HDD2400P
2 x video / 2 x audioCeleron, 1.7GHz, 256MB RAM, 120GB HDD1500P
1 x video / 1 x audioCeleron, 1.0GHz, 256MB RAM, 40GB HDD900P ~ 1000P
DriverHardware requirementsCard Type
Installing the video card in the PC
1. Switch the PC off and pull the main plug out. Open the PC and insert the DVR card in a free PCI socket.
You may have to remove the blank on the rear of the PC. Fix the card using the screws provided.
Connect the watchdog cable correctly to the recorder card and the PC(PC reset switch).
2. Close the PC cabinet and switch on the PC. Windows starts hardware recognition and detects the newly
fitted DVR card.
IMPORTANT : Install the hardware and drivers before the software.
Installing the software
The S/W contains the following applications : DVR Server software
DVR Client
DVR Searcher
Before installing the software, make the following setting on the PC :
1. Set the screen resolution to 1024 X 768 pixels, True Color 32bit.
2. If the graphic card uses an overlay function, disable the function.
3. Disable the screensaver under [Control Panel / Display / Screensaver].
4. In this windows, click [Energy Management]. Set [Turn off monitor], [Turn off hard disks], [Standby]
and [System standby] to “Never”.
HanaNet Digital
Security
5
Main Screen
Overview of the live screen
After the software starts, an information window opens on the screen. Close it by clicking [OK].
Setup: Here you can configure the digital surveillance system. Besides general settings, you can set
the following here : recording type, schedule, motion detection, pan/tilt function, network and
backups.
Search: To play back recording video data you have a wide range of options for finding, analysing and
saving relevant video data.
Pan/Tilt: For controlling connected P/T/Z cameras.
Function: Useful functions such as preview, system info, history, network messages or auto-email are
available.
Date/time: Display of date and time
On-screen information: In the live view, various information can be displayed with the video picture
Channel number
Normal (continuous) recording
Pre(Pr) or Post(Af)-event recording
Recording of motion event
Recording of sensor alarm event
Voice recording
Channel selector: Here you can select a specific channel or automatic channel sequencing.
Main Screen: To view video pictures live, you can select either a single picture (full-screen) or up to 16
(live video) pictures at a time (depending on your video card). You can move the channels around in
the live-video area according to your needs. To do this, left-click a live video picture and
keep the mouse button pressed. Now drag the video picture to the desired live video area
and drop it there.
Alarm outputs: Outputs 1-4 can be switched here manually (optional alarm I/O card required ; see the
section “Installing the alarm I/O card”for fitting).
Exit: Button for exiting the digital surveillance system.
Screen Division: The video section of the live screen can be divided into 4,6,7,9,10,13 or 16 smaller screens.
The channels can be swapped around on the screen. To move a channel, left-click it and
keep the left mouse button pressed. Drag the video picture to the desired position and drop
it there. If you left-click a channel, you can change it to full-screen display. Click again to
return to the original view. A right-click enlarges the video area a fill the whole screen.
HanaNet Digital
Security
6
Main Screen
Preview: The preview shows all currently recorded channels.
System Information: Provides information on operating system, program version or system hardware. Other
(SYS-INFO) useful tools are the recording calculator, drive info or the frame-rate calculator.
Hard –and software info
Disk Info
Recording calculator
Calculate Frame rate
Update Info
Recording calculator
With this calculator, the recording duration can be roughly calculated for a known memory capacity. All
recording, resolution and quality settings are taken into account. The upper window shows the probable
recording duration after the hard-disk size is selected.
Disk Info
Click the button to display information on the total space, used space and free space of the current recording
disk in a window.
Calculate Frame rate
This program calculates the compression rate and single-frame size of individual channels.
Channel selector
Result
Stop
Start
First select a camera or channel. Client [Start Compress data] to start the calculation. When the calculation is
Complete, you can display the picture size and compression with the different Codec variants on the screen.
To do this, press [See the screen]. The number of pictures used for the calculation can be changed on the
right of the [Start Compress data] button.
HanaNet Digital
Security
7
Main Screen
Update History : The history log contains the functions used by the system.
Sending an automatic e-mail
This function automatically sends an e-mail in the event of motion detection or an alarm. The content of the
e-mail is an AVI sequence of any length. The length is defined by the entry under [Post-detection] in seconds,
and the frequency by the entry in the field behind. Enter a start and end time to restrict the period of this
function.
Message function
This function permits the sending of network messages to connected
Network users. Enable a message and select a connected user.
Click [Send] to send the message.
Frequency
Length
Period
Camera selection
Click [Setup E-Mail] to make settings for the send process. Enter the address of your mail server, your own
address and the destination address.
SMTP server
Sender’s address
Recipient’s address
HanaNet Digital
Security
8
Main Screen
Controlling PTZ cameras
To open the PTZ control tab, click [PAN/TILT] in the live screen. With the digital surveillance system, you
can control a large number of PTZ cameras. You first have to configure a connected PTZ camera on the
[Setup / PAN/TILT] tab.
Speed
The pan and tilt speeds can be adjusted according to requirements.
Zoom/Focus
You can zoom and focus the camera manually with the [+] and [-] buttons.
Control
This contains the direction control buttons. At the center an autofocus button is displayed (not active for all
cameras).
Setup Preset Auto Group
Under [Preset], you can save and retrieve This figure shows the Auto Group window.
camera positions. Up to 64 preset positions Here you can form a group of preset positions. The
can be saved for each camera channel. positions of this group are then automatically set by
Select a number from the Preset list and name this camera at specific successive time intervals.
this position under [ID]. Now move the camera Enter a group number and ID and click [Group Add].
to the desired position and then click [Save ID]. In the lower half, select a preset and click [Preset
remove a preset with [Delete Preset]. Add]. Add all desired positions to the group. Then
click [Group Run] to start automatic positioning.
At the bottom, you can set the movement speed and
the dwell time for each position.
Setup menu
Here you can control various functions of the PTZ camera. These functions cannot be accessed for all camera
models.
Close
Click this blue button to close camera control.
Camera no.
Preset list
Go to preset
Name ID
Save ID
Set Preset
Delete Preset
Camera no.
Group Run/Stop
Group Del/Rename
Group # / ID / Add
Preset Delete
Preset Insert / Add
Goto Preset
Movement speed /
Dwell time
HanaNet Digital
Security
9
Main Screen
Power down mode
After you click the “Power down”icon on the GUI,
the following window is displayed.
You now have the following options :
The software and the PC are
completely shut down.
Press to change user.
Reboot the system.
Go to Windows mode.
Click to cancel.
Saving Configuration File
This function allows you to save the complete configuration of the DVR system and reactivate it when required.
Under [Setup], click [Manage the text file of setting value…] at the bottom of the setup screen.
Click the [Write…] button to save the configuration file of the system. The file name
extension is “*.sat”. Enter a file name and click “Save”. The configuration is not saved.
You can load a configuration file by clicking [read…].
HanaNet Digital
Security
10
Programming the DVR system [SETUP]
Via [Setup] in the live screen, you open the configuration menu of the digital surveillance system. You can save
your settings by clicking [Save]. Click [Apply] to save your settings and exit Setup. In Setup, you can set the
following functions:
Standard settings
Voice
One channel is provided for recording audio data. The built-in sound card of the PC is used as input.
Click here to activate audio input (voice recording). Select between microphone(MIC) or line-in(LINE).
Monitor out
The video card of the digital surveillance system has a socket for connecting an external monitor (Chinch
connector next to the camera inputs). You can select channels for display on the external monitor by clicking
[Monitor out Select] (not High End Model). The display mode in the surveillance system (single-picture,
multi-channel display) is used for the external connection. In the case of single-picture display, the channels
can be shown in sequence. You can define the display time (dwell time) of each channel by entering the time
in seconds.
Inhaltsverzeichnis
Beliebte Sicherheitssystem Handbücher anderer Marken
EDM
EDM Solution 6+6 Wireless-AE Bedienungsanleitung
Highway Safety Group
Highway Safety Group EA401 Bedienungsanleitung
Siren
Siren LED GSM Bedienungsanleitung
Detection Systems
Detection Systems 7090i Montageanleitung
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung
Siemens
Siemens FDM273 Bedienungsanleitung