HANNspree Verona Bedienungsanleitung

2438501293P

Liquid Crystal Display

Monitor

22”

REGULATORY INFORMATION

Before operating the monitor, please read this manual thoroughly. This manual

should be retained for future reference.

FCC Class B Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference,

and (2) this device must accept any interference received, including interference

that may cause undesired operation.

CANADA

This Class B digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulation.

Socket-outlet shall be near the equipment and shall be accessible.

This device complies with requirement of EMC directive

89/336/EEC with regard to Electromagnetic Compatibility, and

73/23/EEC and 93/68/EEC with regard to Low Voltage directive.

RECYCLING INFORMATION

HANNspree Inc. cares about environmental protection strategies and in using

manufacturing methods and treatments that lend themselves to conservation

and recycling devices at the end-of-life.

Our products, whenever possible, contain recyclable materials which can be

recycled into new devices. When necessary for operation, other materials may

be classified as hazardous or poisonous substances. We strongly encourage

you to research the provided information about recycling this device.

For more information, please visit

www.Hannspree.com

SAFETY NOTICE

1. Changes or modifications not expressly approved by the party responsible

for compliance could void the user's authority to operate the equipment.

2. Shielded interface cables and AC power cord, if any, must be used in order

to comply with the emission limits.

3. The manufacturer is not responsible for any radio or TV interference

caused by unauthorized modification to this equipment. It is the

responsibilities of the user to correct such interference.

WARNING:

To prevent fire or shock hazard, do not expose the monitor to rain or moisture.

Dangerously high voltages are present inside the monitor. Do not open the

cabinet. For all service issues, please refer to qualified personnel only.

PRECAUTIONS

• Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen

sink, laundry tub, swimming pool or in a wet basement.

• Do not place the monitor on an unstable cart, stand, or table. If the monitor

falls, it can injure a person and cause serious damage to the appliance. Use

only a cart or stand recommended by the manufacturer or sold with the

monitor. If you mount the monitor on a wall or shelf, use a mounting kit

approved by the manufacturer and follow the kit instructions.

• Slots and openings in the back and bottom of the cabinet are provided for

ventilation. To ensure reliable operation of the monitor and to protect it from

overheating, be sure these openings are not blocked or covered. Do not

place the monitor on a bed, sofa, rug, or similar surface. Do not place the

monitor near or over a radiator or heat register. Do not place the monitor in a

bookcase or cabinet unless proper ventilation is provided.

• The monitor should be operated only from the type of power source indicated

on the label. If you are not sure of the type of power supplied to your home,

consult your dealer or local power company.

• Unplug the unit during a lightening storm or when it will not be used for long

period of time. This will protect the monitor from damage due to power

surges.

• Do not overload power strips and extension cords. Overloading can result in

fire and / or electric shock.

• Never push any object into the slot on the monitor cabinet. It could short

circuit parts causing a fire or electric shock. Never spill liquids on the

monitor.

• Do not attempt to service the monitor by yourself; opening or removing

covers can expose you to dangerous voltages and other hazards. Please

refer all service issues to qualified service personnel.

• To ensure satisfactory operation, use the monitor only with UL listed

computers which have appropriate configured receptacles marked between

100 - 240V AC, Min. 5A.

• The wall socket shall be installed near the equipment and shall be easily

accessible.

• Do not install the monitor in a location near heat sources such as

radiators or air dusts, or in a place subject to direct sunlight, or

excessive dust or mechanical vibration or shock.

• Save the original carton and packing materials, as they will come in

handy if you ever have to ship your monitor.

• To ensure problem-free shipping, pack your monitor in the same

packing materials and carton as it was shipped from the factory.

• To keep the monitor looking new, periodically clean it with a soft

cloth. Stubborn stains may be removed with a cloth lightly dampened

with a mild detergent solution. Never use strong solvents such as

paint thinners, benzene, or abrasive cleaning products. These and

other harsh cleaning agents will damage the cabinet of the monitor.

SPECIAL NOTES ON LCD MONITORS

The following symptoms are normal with LCD monitor and do not indicate a

problem.

• Due to the nature of the fluorescent light, the screen may flicker during initial

use. Turn off the Power Switch and then turn it on again to make sure the

flicker disappears.

• You may find slightly uneven brightness on the screen depending on the

desktop pattern you use.

• The LCD screen has effective pixels of 99.99% or more. It may include

blemishes of 0.01% or less such as a missing pixel or a pixel lit all of the

time.

• Due to the nature of LCD screens, an after image of the previous displayed

content may remain if this image has been the displayed for several hours.

The LCD screen should recover if the image is changed or powered off for

several hours.

• If the screen suddenly flashes erratically or the backlighting fails, please

contact your dealer or service center for repair. Do not attempt to repair the

monitor yourself.

PREFACE

Thank you for purchasing a Hannspree Liquid Crystal Display Monitor (LCD

Monitor).

Please carefully read this manual in its entirety before setting up, using or

operating your Monitor. To ensure the safe and correct installation and

operations of the Monitor, it is important that the safety and operation

instructions in this manual are followed.

This instruction manual is designed to assist you in setting up and using the

Monitor. The information in this manual has been carefully checked for

accuracy; however, no guarantee is given to the correctness of the contents.

The information in this manual is subject to change without notice.

To the extent allowed by applicable law, Hannspree, Inc. (“Hannspree”) shall not

be liable for direct, indirect, special, exemplary, incidental or consequential

damages arising from any defect or omission in this manual, even if advised of

the possibility of such damages in advance.

notice. All brand, product, service names and logos are trademarks and/or

registered trademarks of their respective manufacturers and companies.

Screen shots are simulated.

Content

Safety Precautions .............................................................................8

First Setup ..........................................................................................9

QuickInstallation ................................................................................9

Front Viewofthe Product ...................................................................10

Rear Viewofthe Product....................................................................10

UsingOn Screen Display (OSD) Functions........................................11

SupportingTimingModes...................................................................14

Technical Information..........................................................................15

Care and Maintenance .......................................................................16

Troubleshooting..................................................................................16

Safety Precautions

This monitor is manufactured and tested on aground principle that a

XVHU¶VVDIHW\FRPHV¿UVW+RZHYHULPSURSHUXVHRULQVWDOODWLRQPD\UHVXOW

danger to the monitor as well as to the user. Carefully go over the following

WARNINGSbefore installation and keep this guide handy.

WARNINGS:

This monitor should be operated only at the correct power sources

indicated on the label on the rear end ofthe monitor. Ifyou’re unsure of

the power supply in your residence, consult your local dealer or power

company.

Do not try to repair the monitor yourselfas it contains no user-

VHUYLFHDEOHSDUWV7KHPRQLWRUVKRXOGRQO\EHUHSDLUHGE\DTXDOL¿HG

technician.

Do not remove the monitor cabinet. There is high-voltage parts inside

that may cause electric shockto human bodies, even when the power

cord is disconnected .

Stop usingthe monitor ifthe cabinet is damaged. Have it checked by a

service technician.

Put your monitor only in aclean, dry environment. Unplugthe monitor

immediately ifgets wet and consult your service technician.

Always unplugthe monitor before cleaningit. Clean the cabinet with a

clean, dry cloth. Apply non-ammoniabased cleaner onto the cloth, not

directly onto the glass screen.

Keep the monitor away frommagnetic objects, motors, TVsets, and

transformer.

Do not place heavy objects on the cable or power cord.

For PLUG CABLE EQUIPMENT, the Socket-outlet shall be installed

near the equipment and shall be easily accessible.

First Setup

Congratulation for purchasingthis monitor ofhigh performance!

This monitor comes with the followingaccessories :

zPower cable

zD-Sub cable (15 pin)

zAudio cable

z

Quick Installation

1. Connect video cable (D-Sub cable)

Make sure both monitor and computer are powered OFF. Connect the video

cable (D-Sub cable) to the computer, then to the monitor.

2. Connect HDMI cable(Not supplied)

Connect the HDMI cable fromHDMI output ofcomputer to the HDMI input of

the monitor.

3. Connect power cord

Connect the power cord to aproperly grounded AC outlet, then to the monitor.

4. Power-ON computer and monitor

Power-ON the computer, then Power-ON the monitor.

5. Windows users: Setting the Timing Mode (Resolution and Refresh Rate)

Example: 1680 x 1050 @ 60 Hz

Resolution Right-clickon the Windows desktop > Properties > Settings > “Desktop

Area”. Set the resolution.

Refresh Rate (vertical frequency) See your graphic card’s user guide for instructions.

Example:

Power cable

z

Warranty and Service Manual

CD ROM (including User’s manual)

HDMI Cable (Optional)

DVI-D/HDMI Cable (Optional)

HDMI Cable (Optional)

Inhaltsverzeichnis

Andere HANNspree Monitor Handbücher

HANNspree

HANNspree HG244PJB Bedienungsanleitung

HANNspree

HANNspree HF259HPB Bedienungsanleitung

HANNspree

HANNspree HP225HFB Bedienungsanleitung

HANNspree

HANNspree HO225HTB Bedienungsanleitung

HANNspree

HANNspree HP228PJB Bedienungsanleitung

HANNspree

HANNspree HS275HFB Bedienungsanleitung

HANNspree

HANNspree HANNS-G HQ271 Bedienungsanleitung

HANNspree

HANNspree HANNS-G HU282PPS Bedienungsanleitung

HANNspree

HANNspree HL205HPB Bedienungsanleitung

HANNspree

HANNspree HC281HPB Bedienungsanleitung

HANNspree

HANNspree HT221PPB Bedienungsanleitung

HANNspree

HANNspree Hanns.G HT161HNB Bedienungsanleitung

HANNspree

HANNspree HS270HCB Bedienungsanleitung

HANNspree

HANNspree 8HAHP248UJB Bedienungsanleitung

HANNspree

HANNspree HG191 Bedienungsanleitung

HANNspree

HANNspree HF257HP Bedienungsanleitung

HANNspree

HANNspree HANNS-G HL247HGB Bedienungsanleitung

HANNspree

HANNspree HC270PPB Bedienungsanleitung

HANNspree

HANNspree HP246PFB Bedienungsanleitung

HANNspree

HANNspree HP248WJB Bedienungsanleitung

HANNspree

HANNspree HS228PPB Bedienungsanleitung

HANNspree

HANNspree HANNSboston Xm-S LM05-19U1-300G Installationsanleitung

HANNspree

HANNspree LCD Monitor Bedienungsanleitung

HANNspree

HANNspree HO101HTB Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung