Hurricane-AW 1
1. General Safety Information
This General safety information is for the safe and successful using of the device
1. All the persons who are involved in using the device should fully read and understand the manual
prior to using the device.
2. The usage of the device in front of public audiences can have many potential risks, such as severe
personal injuries or property damages. So, it is mostly important to follow all safety rules and
regulations as well as instructions imposed or recommended by relevant parties such as authorities
or manufacturer.
3. Never instruct or order unqualified persons to run the devices in a potentially risky application.
4. This device is intended to provide general flame effect. As with all potentially dangerous special
effects, the operator should be in full view of all the devices at all times during whole events. In
addition, he has to be able to take action in the technical control of the devices at any time if a
potentially dangerous situation happens.
5. Keep off any ignition sources, unqualified persons or children.
6. The necessary fire prevention and first aid measurements should be prepared properly depending
on the size and type of the events.
7. Do not use fuels that are not recommended by the manufacturer.
8. Do not touch the flame head during and just after the usage. It is very hot and you can be injured.
Wait till the flame head is completely cooled down and then touch it
9. Inspect thoroughly and regularly the devices every 6 months for reliability.
10. Do not use damaged equipment. If a damage is found, immediately repair the device or if you can’t
repair, send the device back to the manufacturer for professional repair.
11. Any changes in or to the devices is not allowed. In any case of change to the devices, our warranty
and product liability will be void.
12. Please be sure that the devices are standing securely.
13. Make sure that the device is not covered by anything and that the fuel can be easily exhausted
through the nozzle. Furthermore ensure that combustible objects like papers, confetti or streamers
should not enter the burning chamber of the device.
14. Arm the devices as shortly as possible before the effect and disarm them immediately after the
effect.
15. Cable connections from the control units to the device are always to be insulated and must comply
with the technical standards. At the same time, avoid cable damage from heat, twisting, pinching
and burn-off cinders or forced piercing. All cables must be checked before using.
16. All the relevant persons should meet the relevant safety distances during whole event period.
17. During testing and firing the devices, no persons or animals are allowed in the hazard area.
Furthermore no materials that are heat-sensitive or that can catch fire are allowed in the same.
18. Never bow over the device or put parts of your body above or respectively before the burning
chamber if the device is switched on and always keep at least the safety distance that is required so
that no dangerous situation can happen
