HANYOUNG NUX MT100 Bedienungsanleitung
Digital Mold Controller
▣ Notice
This user guide is protected by copyright and we have all rights related to it.
Without prior authorization from HANYOUNG, this guide and any parts contained
therein cannot be reproduced, copied, or translated to another language.
The contents of this guide will be provided in this form and can be edited or
changed without prior notice.
This guide includes an implied guarantee or suitability for a certain purpose, and
does not oer any guarantee for those who do not limit this matter.
All titles, symbols, figures, service marks, etc. in this guide or the product are
legally registered company names, service marks, and trademarks.
HANYOUNG NUX
Before You Start Installation Screen &
Parameters
Handling and
Operating Specications
1
01. Check the Contents
02. Safety Notice
01. Sux code
01. External Dimension and Panel Cutout
02. Terminal Diagram
03. Names and Functions of Parts
01. Screen Layout
02. Monitor Screen Layout
03. Operation Control Setting Screen Layout and
Structure
04. Output Setting Screen and Layout Structure
05. Sensor Setting Screen Layout and Structure
06. Operation Screen Layout and Structure
07. Time Setting Screen Layout and Structure
08. Option Screen Layout and Structure
09. Error Info Screen Layout and Structure
10. Language Setting Screen Layout and
Structure
11. Parameters Reference Table
01. Front Panel Layout
02. Power On/O
03. Starting and Finishing of Control
04. Temperature Related Settings
05. Output Setting
06. Auto Tuning
07. Time Setting
08. Auto MEDI Filling
09. Suction
10. Forced Cooling
11. Pre-heating
12. Control Sensor Change
13. Pressure Check
14. Various Functions
15. Troubleshooting
01. Specications
2
4
6
7
8
12
17
18
20
21
22
23
24
25
26
26
27
32
33
33
34
35
35
36
38
39
39
40
40
41
42
44
45
2
Digital Mold Controller
▣ Before You Start
▶ Thank you for purchasing MT 100 (Mold Temperature Controller). This chapter
describes the installation of this product and how to use the product. The contents
of this chapter are as follows.
1) Check the Contents
2) Safety Notice
◈
◈
◈
◈
01. Check the contents
▶ Once you receive the product, please check for external damage.
▶ Please check whether the product specication is the same as what you
purchased.
(You can check the model specication code on the product's case and
carton box)
▶ Please check to ensure that the following contents are included.
▶ If the product has external damage or some contents are missing, please
contact the place of purchase or our sales department.
3
▼ Before You Start Installation Screen &
Parameters
Handling and
Operating Specications
◈
▶ MT100 Display Unit
▶ MT100 User Manual
▶ MT100 Main Unit
▶ Connection cable
▶ Communication cable
▶ 2 pin terminal : 7 Pieces
▶ 3 pin terminal : 1 piece
▶ 6 pin terminal : 2 or 3 pieces
▶ 8 pin terminal: 2 pieces
※ 3 for HB option and 2 for non-HB
option
※ For communication option
※ Display unit to main unit
4
Digital Mold Controller
◈
◈
◈
02. Safety Notice
▶ Please make this manual is delivered to the end user and is placed where it can
be easily found.
▶ Please install and operate this product after reading and fully understanding the
manual.
▶ This manual contains detailed information about the product and any matter not
mentioned in this manual cannot be guaranteed.
▶ This manual is written carefully and believed to be accurate, but please call us if
you nd any errors, omissions, or have suggestions for improvements.
▶ The contents of this user manual can be edited without prior notice for
improvement and modication of the product.
▶ For the safety and protection of the system that uses this product, please read and
follow the manual with care.
▶ We are not liable for any damage and safety problems due to disregards of the
manual or lack of care in product operation.
▶ In case the system needs any extra safety circuitry or other safety materials for the
safety and protection of the system, please install them outside of the product. Do
not modify or add components inside of the product.
▶ Do not disassemble, repair or reconstruct the product. It may result in electric
shock, re, or malfunction.
▶ Do not impact the product. It could result in malfunction or damage.
▶ Unless it is included in the company's terms and conditions for warranty, we are
not responsible for any warranties or guarantees.
▶ We are not liable for any damages and indirect loss of the use or third person due
to unpredicted natural disasters.
5
▼ Before You Start Installation Screen &
Parameters
Handling and
Operating Specications
◈
▶ The warranty for this product is valid for one year from purchase and we will x
any breakdown and faults from proper uses as it is mentioned in this manual for
free of charge.
▶ After the warranty period, there will be a charge for repair according to our
policies
▶ Under the following conditions, there will be a charge for repairs during the
warranty period.
▷ Breakdowns due to user misuse.
▷ Breakdowns due to natural disaster.
▷ Breakdowns due to relocation of the product after installation.
▷ Breakdowns due to modication of the product.
▷ Breakdowns due to power interruption.
▶ Please call customer service for A/S.
▷ Tel : +82
－
1577
－
1047
◈
▶ Please install the product panel on the panel before you operate it since there is
a possibility of electric shock if you do not.
▶ Please turn o the power of all the units and products before connecting the
cables to each other.
▶ Please do not touch the product with wet hands. It can cause electric shock.
▶ Never use any gas pipe, lighting rods, or electrical wires as a ground. It can
cause ignition and explosion.
▶ Please do not turn on electricity before installation of this product is completed.
It can cause breakdowns.
▶ It can cause electric shock and re when improper power source is used.
▶ Please do not install the product inclined.
▶ Please avoid installing the product in the following places where.
▷ People can touch terminal unintentionally.
▷ It is exposed to mechanical shock or vibration.
▷ Danger or corrosion or combustion of gas exit.
▷ Temperature changes frequently.
▷ Temperature is either too high (Over 50 C) or too low (Below 0 C).
(If you use our product below 10 C, please warm up for more than 30 minutes)
▷ It is exposed to direct sunlight.
▷ It is exposed to very high level of electromagnetic waves.
▷ Humidity is high (Over 85% humidity)
▷ It has many combustible objects.
▷ It has dust and salinity.
▷ It is exposed to heat radiation by other units.
▷ It is exposed to noise caused by other units.
6
Digital Mold Controller
03. Model Name and Sux Code
Model Number Description
MT100 Mold Temperature Controller
Communication
0 No communication
1 RS485 / 422
Pressure check
0 No pressure check
1 Pressure check by input of contact
2 Pressure check by 4
－
20 mA dc
HB Test
0 No HB
13 HB(s)
※ CT (CTL
－
6
－
S) is sold separately
7
Before You Start ▼ Installation Screen &
Parameters
Handling and
Operating Specications
▣ Installation
▶ Unit : mm
▶ Unit : mm
01. External Dimensions and Panel Cutout
◈
◈
155.0
130.0
8.8
114.0
23.3
25.3
140.0
23.3
2.0
141
+0.5-0
115
+0.5-0
171.0
145.0
8
Digital Mold Controller
03. Terminal Diagram
◈
※ Before connecting cables to the units, turn o the main power of all the units and
make sure the cables to be connected are not conducting; then connect the cables
to the units.
※ Do not touch the terminals when the power is being supplied to the unit because
there is a possibility of electric shock.
※ Make sure the main power has been turned o and connect cables to the units.
▶ Cause of Noise
▷ Relay and Contact
▷ Motor commutator
▷ Solenoid Coil, Solenoid Valve
▷ Phase angle SCR
▷ Power Line
▷ Remote Communication equipment
▷ Inductance Load
▷ Welding equipment
▷ Inverter
▷ High-pressure ignition equipment
▶ Countermeasure for Noise
▷ Please allow the input wires some distance from the power circuit and earth
circuit.
▷ Please use the shield wires if there is noise caused by the electrostatic
induction.
▷ Avoid having two grounds. If necessary, connect the shield wire to the earth
terminal.
▷ Please twist input wires closely if there is noise caused by electromagnetic
induction.
Inhaltsverzeichnis
Andere HANYOUNG NUX Controller Handbücher
HANYOUNG NUX
HANYOUNG NUX HY-1000 Bedienungsanleitung
HANYOUNG NUX
HANYOUNG NUX TPR-3N Bedienungsanleitung
HANYOUNG NUX
HANYOUNG NUX TPR-3SL Bedienungsanleitung
HANYOUNG NUX
HANYOUNG NUX TPR-3SL Bedienungsanleitung
HANYOUNG NUX
HANYOUNG NUX TPR-3M Bedienungsanleitung
HANYOUNG NUX
HANYOUNG NUX HY Series Bedienungsanleitung
HANYOUNG NUX
HANYOUNG NUX TPR-3SL-EP Bedienungsanleitung
HANYOUNG NUX
HANYOUNG NUX TPR-3SL-EP Bedienungsanleitung
HANYOUNG NUX
HANYOUNG NUX HY Series Bedienungsanleitung
HANYOUNG NUX
HANYOUNG NUX MC9 Series Bedienungsanleitung
HANYOUNG NUX
HANYOUNG NUX BR6 Bedienungsanleitung
HANYOUNG NUX
HANYOUNG NUX NP100 Bedienungsanleitung
HANYOUNG NUX
HANYOUNG NUX TH510 Series Bedienungsanleitung
HANYOUNG NUX
HANYOUNG NUX NP100 Bedienungsanleitung
HANYOUNG NUX
HANYOUNG NUX FS-3A Bedienungsanleitung
HANYOUNG NUX
HANYOUNG NUX TPR-2N Bedienungsanleitung
HANYOUNG NUX
HANYOUNG NUX ND4 Bedienungsanleitung
HANYOUNG NUX
HANYOUNG NUX TPR-3N Bedienungsanleitung
HANYOUNG NUX
HANYOUNG NUX TPR-2SL Bedienungsanleitung
HANYOUNG NUX
HANYOUNG NUX ED6 Bedienungsanleitung
