Harbor Freight Tools 93985 Haul-Master Kurzanleitung

ASSEMBLY & OPERATING INSTRUCTIONS

93985

2 WHEELED SELF-DUMPING

WHEELBARROW

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web Site at www.harborfreight.com

any artwork contained herein may be reproduced in any shape or form without the

express written consent of Harbor Freight Tools.

For technical questions and replacement parts please call 1-800-444-3353.

SKU 93985 For technical questions please call 1-800-444-3353. Page 2

THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please

complete the owner’s record below:

Model______________ Serial No._____________ Purchase Date_______________

SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the

entire manual to become familiar with the unit BEFORE you begin assembly.

Technical Specifications

Front Wheels: 14" Diameter x 4" Width; pneumatic- 30 PSI/ 2 Ply

Tray Dimensions: 39" Length x 25-3/4" Width x 12" Depth x 1/8" Tall

Load Capacity: 6 Cubic Feet/330 Lbs. (Dead weight)

Overall Dimensions: 60.5" Length x 29" Width x 27.75" Tall

Maximum Load Capacity: 330 Lbs. (Dead weight)

Safety Warnings and Precautions

WARNING: When using product, basic safety precautions should always be followed to

reduce the risk of personal injury and damage to equipment.

Read all instructions before using this product!

1. Keep work area clean. Cluttered areas invite injuries.

2. Observe work area conditions. Keep work area well lighted.

3. Store idle equipment. When not in use, the Wheelbarrow must be stored in a dry location to

inhibit rust. Always lock up products and keep out of reach of children.

Use the right product for the job. There are certain applications for which the Wheelbarrow

was designed. It will do the job better and more safely carrying, transporting and dumping a

load for which it was intended. Do not modify the Wheelbarrow and do not use the

Wheelbarrow for a purpose for which it was not intended.

5. Check for damaged parts. Before using any product, any part that appears damaged should

be carefully checked to determine that it will operate properly and perform its intended function.

Check for any broken or damaged parts and any other conditions that may affect its operation.

Replace or repair damaged or worn parts immediately.

6. Replacement parts and accessories. When servicing, use only identical replacement parts.

Use of any other parts will void the warranty.

7. Do not operate product if under the influence of alcohol or drugs. Read warning labels on

prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there

is any doubt, do not operate the product.

8. Use eye and hand protection. Always wear ANSI approved impact safety goggles, work

clothes and work gloves.

9. Do not exceed this product’s maximum load capacity of 330 Lbs., (dead weight).

SKU 93985 For technical questions please call 1-800-444-3353. Page 3

10. Only use on a flat surface capable of supporting the Wheelbarrow and its maximum

capacity load of 330 Lbs. It is easy to lose control of the Wheelbarrow if attempting to pull a

load on a sloping or uneven surface.

11. Wear gloves and avoid sharp edges when assembling.

12. Do not allow children to play on, stand upon or climb into the Wheelbarrow. The

Wheelbarrow is not for carrying people or animals.

13. Always check hardware and assembled parts after assembling. All connections should be

tight and hardware tightened.

Warning: The warnings, cautions, and instructions discussed in this instruction manual cannot

cover all possible conditions and situations that may occur. It must be understood by

the operator that common sense and caution are factors which cannot be built into

this product, but must be supplied by the operator.

When unpacking your Wheelbarrow, check to make sure the following parts are included. If any

parts are missing or broken, please call HARBOR FREIGHT TOOLS at 1-800-444-3353.

Check the tire pressure often. A low Tire PSI will force the user to exert greater energy to move the

Wheelbarrow. Damage to the tires will occur if the Wheelbarrow is used below the recommended PSI.

Maintenance

Unpacking

SKU 93985 For technical questions please call 1-800-444-3353. Page 4

Attach the Tray Support Plate (14) to the

bottom of the Tray (1) using Bolts (18),

Washers (30) and Nuts (18).Then attach the

Tip Guard (6), using Bolts and Lock Nuts (25).

(14)

(1)

(11)

(13)

(12)

(23)

(10)

(29)

Put the Shaft (11) through the Shaft Support

(13). Attach the Nose Guard (12) to the Shaft

Support (13) with Bolts and Lock Nuts (23).

Put the Wheels (10) on the Shaft (11) on each

side. Secure the wheels in place using

Washers (29) and Cotter Pins (28).

(21)

(30)

(3)

(22)

(8)

(20)

(16) (7)

(22)

(9)

(8)

Put the Bolts (21) through the Handles (3)

and Legs (8).Then put the Bolts (22)

through the front Wedges (9), Handles (3),

Support Bar (16) and the legs (8). Secure

the Cross Braces (7) with Bolts (20),

Washers (30) and Nuts (20).

Hold the Bolts (22) with screwdriver before

tightening the nuts. Caution: Do not insert

your finger into theWedge Hole when

supporting the Bolt (22). Follow the same

steps for the other Legs(8).

Position the tray Support Plate (14) on the the

Wedges (9) and secure them using the Bolt

and Lock Nuts (24). See Page 9.

(24)

The Support Plate (14) and Wedege (9) are

secure into place using Bolts and

Lockwashers (24).

Assembly Instructions

(9)

(14) (9)

(6)

(28)

SKU 93985 For technical questions please call 1-800-444-3353. Page 5

Attach the Stopper (2) to the clip on the rear

tray with Bolts (18), Washers (30), and Nuts

(18). Some adjustment is needed to ensure

the Stopper (2) is aligned with the Hook (17).

(2)

(17)

(19)

(26)

Adjustments should be made to ensure that

the stopper aligns with the hook.The Stopper

(2) can be adjusted up or down to align with

the Hook (17) as shown on step 6b.

To assemble the tray release system guide

the Release Cable (4) into the Handle (3).

NOTE: Do not tighten the Release Cable

until the tray release unit is assembled.

Guide the Release Cable through the Hook

Bracket (5).Then attach the Hook Bracket (5)

to the Handle (3) with Bolts (19), Washers

(30), and Nuts (19).

Pull the Release Cable (4) backward to remove

any slack in the Cable before securing it to the

Handle (3), using an Allen Key (not included).

With Bolt (26) in the Hook (17), guide in the

release cable into the hole in the Bolt (26).

Then tighten it with the Lock Nut (26)

Adjustment of the Stopper (Step 5a) may be

needed to align it with the hook.

(4)

(5)

Guide in the Handle Grips (27) into both

Handles (3).Then tighten all the bolts and

nuts using a wrench ( not included ). Inflate

the Tires (10) to no more than 21 psi.

(3)(27)

(3)

(4)

(3)

(26)

(17)

(10)

(30)

(3)

SKU 93985 For technical questions please call 1-800-444-3353. Page 6

Tools And Bolt Chart

Note:The hardware is included, the tools are not.They are shown for reference purposes only.

SKU 93985 For technical questions please call 1-800-444-3353. Page 7

Dumping Process

NOTE: To release the Tray (1) squeeze the Release Cable (4) as shown in figure 3, then lift up on the back

of the tray. To retract the tray, you may lift the Handles (3) forward, clipping the hook to the tray.

(4)

(1)

(3)

SKU 93985 For technical questions please call 1-800-444-3353. Page 8

Troubleshooting Guide

In the event the 3” bolt misaligned please use

a flathead screwdriver to align the bolt as

shown in figure 1.

Figure 1

Troubleshooting tips for step 3a.

Troubleshooting tips for step 7.

You may need to apply a small amount of

light oil to the handle (3) before installing

the Handle Grips (27).

(27)

(3)

SKU 93985 For technical questions please call 1-800-444-3353. Page 9

5/16 x 3"

(ROOFING x 2)

Shaft

Description

Nose Guard

Hook

Carr iage Bolt & Nut 5/16" x 3/4"

HexBolt & Nut 5/16" x 3/4"

HexBolt & Nut 5/16" x 2 1/2"

Tray Support Plate

Long Stay

Side Support

Shaft Support

Cross Brace

Hook Bracket

HandBrake

Tip Guard

Wheel

Leg

Wedges

Description

St o pper

Handle

Tray

Qty

1/2 x 2 1/2"

(HEX x 2)

5/16 x 1 1/2"

(CARRIAGE x 2)

5/16 x 3/4"

(CARRIAGE x 4)

COTTER PIN

FLAT WASHER

Carri age Bolt & Lock Nut 5/16" x 1 1/2"

HexBolt & LockNut 1/2" x 2 1/2"

HexBolt & LockNut 5/16" x 1 3/4"

Qty

Description

Carr iage Bolt & Nut 5/16" x 3"

Roofing Bolt & Nut 5/16" x 3"

Spring Washer 5/16"

HexBolt & LockNut 3/8" x 3/4"

Flat Washer

Cotter Pin

HandleGrip

Qty

SPRING WASHER 5/16"

5/16 x 2 1/2"

(HEX x 2)

5/16 x 3"

(CARRIAGE x 2)

5/16 x 1 3/4"

(HEX x 2)

5/16 x 3/4"

(HEX x 4)

5/16 x 3/4"

(CARRIAGE x 2)

3/8 x 3/4"

(HEX x 1)

Parts List / Diagram

SKU 93985 For technical questions please call 1-800-444-3353. Page 9

Release Cable

Support Bar

Side Support

Tire

Note: Part #5 and #17 are only sold as an assembly.

SKU 93985 For technical questions please call 1-800-444-3353. Page 10

PLEASE READTHE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A

REFERENCETOOL ONLY. NEITHERTHE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION

OR WARRANTY OF ANY KIND TOTHE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TOTHE

PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE

MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS

REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE

BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE

ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION

OF REPLACEMENT PARTS THERETO.

3491MissionOaksBlvd. • P.O. Box6009• Camarillo, CA93011• (800) 444-3353

LIMITED 90 DAY

WARRANTY

Harbor Freight Tools Co. makes every effort to assure that its products meet highquality and

durability standards, andwarrants to theoriginal purchaser that this product is free fromdefects in

materials andworkmanship for the periodof ninety days fromthe date of purchase. This warranty

does not apply to damage duedirectly or indirectly to misuse, abuse, negligence or accidents;

repairs or alterations outside our facilities; or to lack of maintenance. We shall in noevent be liable

for death, injuries to persons or property, or for incidental, contingent, special or consequential

damages arisingfromthe use of our product. Some states donot allowthe exclusionor limitation

of incidental or consequential damages, so theabove limitationof exclusionmay not apply to you.

Totake advantage of this warranty, the product or part must be returned to us with transportation

charges prepaid. Proof of purchase date andan explanationof the complaint must accompany the

merchandise. If our inspectionverifies the defect, we will either repair or replace the product at our

electionor we may elect to refundthepurchase price if wecannot readily andquickly provide you

with a replacement. We will return repaired products at our expense, but if we determine there is no

defect, or that the defect resulted fromcauses not within the scope of our warranty, then youmust

bear the cost of returningthe product.

This warranty gives youspecific legal rights andyoumay also have other rights which vary from

state to state.

Inhaltsverzeichnis

Andere Harbor Freight Tools Rasen- und Gartengeräte Handbücher

Harbor Freight Tools

Harbor Freight Tools 40052 Bedienungsanleitung

Harbor Freight Tools

Harbor Freight Tools 94723 Kurzanleitung

Harbor Freight Tools

Harbor Freight Tools 97736 Bedienungsanleitung

Harbor Freight Tools

Harbor Freight Tools 40129 Bedienungsanleitung

Harbor Freight Tools

Harbor Freight Tools One Stop Gardens 94954 Bedienungsanleitung

Harbor Freight Tools

Harbor Freight Tools One Stop Gardens 92151 Kurzanleitung

Harbor Freight Tools

Harbor Freight Tools One Stop Gardens 92346 Bedienungsanleitung

Harbor Freight Tools

Harbor Freight Tools 90792 Bedienungsanleitung

Beliebte Rasen- und Gartengeräte Handbücher anderer Marken

Vertex

Vertex 1/3 HP Technische Daten

GHE

GHE AeroFlo 80 Bedienungsanleitung

Millcreek

Millcreek 406 Bedienungsanleitung

Land Pride

Land Pride Post Hole Diggers HD25 Bedienungsanleitung

Yazoo/Kees

Yazoo/Kees Z9 Commercial Collection System Z9A Programmierhandbuch

Premier designs

Premier designs WindGarden 26829 Bedienungsanleitung

Snapper

Snapper 1691351 Bedienungsanleitung

Mosquito Magnet

Mosquito Magnet Patriot Bedienungsanleitung

Perfect

Perfect BG2 Bedienungsanleitung

P.Lindberg

P.Lindberg LS2 Bedienungsanleitung

Gardena

Gardena Easy 1887 Bedienungsanleitung

Makita

Makita UM104D Bedienungsanleitung

AQUA FLOW

AQUA FLOW PNRAD Bedienungsanleitung

Tru-Turf

Tru-Turf RB48-11A Golf Green Roller Benutzerhandbuch

BIOGROD

BIOGROD 730710 Bedienungsanleitung

Land Pride

Land Pride RCF2784 Bedienungsanleitung

Makita

Makita UM110D Bedienungsanleitung

BOERBOEL

BOERBOEL Standard Floating Bar Gravity Latch Bedienungsanleitung