Automatic/Manual mode status
Variable application rate status
Service interval warning
Boom status without dual line
Active register (area trip)
Symbols in display’s 1st line
Symbol display and register number
Preset key readout (keys 6-11 below) or menu number
Optional readout
Optional readout
Press the key shortly, and it will show the preset
readout.
Hold the key down for one second, and it will
work as a short cut to a certain menu.
Navigation keys
Enter key
Clear key
Escape key
Automatic control key, which also clears % over / % under rate
Volume rate
Speed
Tank contents
Area
Volume sprayed
Remaining distance
or area
Menu 1.1 :
Menu 3.1.1 :
Menu 1.2 :
Menu 1.3.1 :
Menu 1.3.1 :
Menu 4.1.1 :
Volume rate
Speed calibration
Tank contents
Select register
Select register
Measuring distance
Additional key information
•Escape a menu (hold to escape all menus)
•Escape without changing value
•Move the selection of digits or letters to the
left or to the right
•Enter a menu
•Confirm (accept) a value
•Clear a value
•Reset the active register (hold until
countdown is finished)
•Scroll up
•Increase a value
•Increase volume rate in steps or select
another preset application rate
•Scroll down
•Decrease a value
•Decrease volume rate in steps or select
another preset application rate
D1 D2 D3 D4
Flashing* Spraying
Section: off on off on
Main: off off on on
* Section closed by Auto ON/OFF or external variable rate control.
