Hardi Front Tank Bedienungsanleitung

FRONTTANK + FT 3610

Original

User Guide for MEGA

67058500-100, version 1.00

GB - 07.2020

www.hardi-international.com

We congratulate you for choosing a HARDI plant protection product. The reliability and

efficiency of this product depend upon your care and use. The first step is to carefully read and

pay attention to this user guide, it contains essential information.

This user guide covers all MEGA Sprayer models produced from 01-02-2019 onwards and the 1200/1500 Litres

HARDI FrontTank.

User guide Formalities

The original user guide is approved and published in English. All other languages are translations of the original

user guide. In the event of any conflicts, inaccuracies or deviations between the English publication and other

languages, the English version shall prevail.

Illustrations, technical information and data in this guide are assumed to be correct at the time of printing.

Published and printed by HARDI INTERNATIONAL A/S.

Instructions

General FrontTank Operation

Control Box

FT 3610 Control Box Functions

The FrontTank has its own control box, the FT3610 with the following

functions:

1. Control Box Main ON/OFF

2. Suction from FrontTank

3. Suction from MainTank

4. FrontTank Agitation ON/OFF

5. FrontTank Cleaning ON/OFF (Optional)

6. FrontTank Work Light ON/OFF

7. Not in use

8. Not in use

9. Not in use

10. Not in use

Main ON/OFF

In order to use the FrontTank functions, the control box must be turned

on.

1. Press button (1) to switch the FT 3610 control box on.

2. Press and hold button (1) for 5 seconds to switch the FT 3610 control

box off.

÷NOTE! The system is ready to use when the ON/OFF LED shows a

steady light.

Suction from the FrontTank/MainTank

Selecting suction from the FrontTank or the MainTank.

÷NOTE! There is no LED light indicating what position the valve is in

when the FT3610 is turned on, the operator must select the

wanted valve position and verify that the LED light turns on for the

selected button.

1. To select suction from the FrontTank, press button (2) on the FT 3610

control box.

2. To select suction from the MainTank, press button (3) on the FT 3610

control box.

μATTENTION! There must be a steady LED light for either suction

from the FrontTank or suction from the MainTank button, NOT

both, for the valve to be in the selected position

Instructions

Switching between Suction from the FrontTank or the MainTank

To switch from the MainTank to the FrontTank:

1. (A) Press button (3), to deselect suction from the MainTank, (B)

ensure the LED light is turned off at the MainTank button.

2. (C) Press button (2), to select suction from the FrontTank, ensure the

LED light is turned on at the FrontTank button.

To switch from the FrontTank to the MainTank:

1. (A) Press button (2), to deselect suction from the FrontTank, (B)

ensure the LED light is turned off at the FrontTank button.

2. (C) Press button (3), to select suction from the MainTank, ensure the

LED light is turned on at the MainTank button.

μATTENTION! (D) There must be a steady LED light for either suction

from the FrontTank or suction from the MainTank button, NOT

both, for the valve to be in the selected position.

Agitation

The FrontTank has its own pump for agitation.

1. To switch the FrontTank agitation pump ON/OFF, press button (4) on

the FT 3610 control box.

μATTENTION! Make sure the FrontTank is at least half full before

using the FrontTank agitation function, this will ensure the

agitation pump has been primed.

±WARNING! Do NOT run the agitation pump dry, doing so will

damage the pump.

Instructions

Cleaning (Optional)

The FrontTank has its own pump and cleaning nozzles for internal

cleaning.

1. To switch the FrontTank cleaning pump ON/OFF, press button (5) on

the FT 3610 control box.

μATTENTION! Always fill the RinseTank before starting the FrontTank

cleaning procedure, to ensure the pump has been primed.

μATTENTION! It is advisable to conduct a timed test with a full

RinseTank, to get the correct time it takes to empty the RinseTank.

This should be done before any spray job and cleaning is carried

out.

÷NOTE! The cleaning procedure is split into three cycles, each

running approx 1/3 of the measured time. Do NOT exceed the total

running time measured in the above mentioned test, to prevent

unintentional dry running of the pump.

±WARNING! Do NOT run the cleaning pump dry, doing so will

damage the pump.

Light

The FrontTank comes with a pair of front-mounted LED work lights.

1. To switch the work light ON/OFF, press button (6).

μATTENTION! The lights mounted on the FrontTank are work light

only, and NOT legal for road use.

Instructions

General FrontTank Operation

Valve Settings

Filling the FrontTank

Filling the FrontTank is done by transferring the pre-mixed spray liquid to

the FrontTank from the MainTank.

1. Select suction from the MainTank on the FT 3610 Control

box.

2. The correct procedure is to mix the chemicals in the Turbofiller as

described in the MEGA Instruction book chapter 5 - Operation

“Filling liquid/powder chemicals using the TurboFiller”.

3. Pump the spray liquid from the MainTank to the FrontTank, using the

valve settings shown in the illustration.

μATTENTION! It is not possible to use the TurboFiller and pump

liquid from the MainTank to the FrontTank at the same time, it must

be done in two individual procedures.

Emptying the FrontTank

Emptying the FrontTank can be done by transferring the spray liquid in

the FrontTank to the MainTank.

1. Pump the spray liquid from the FrontTank to the MainTank, using the

valve settings shown in the illustration.

2. Select suction from the FrontTank on the FT 3610 control

box.

Spraying with Suction from the FrontTank

Spraying using the spray liquid in the FrontTank.

1. Position the valves as shown in the illustration.

2. Select suction from the FrontTank on the FT 3610 control

box.

3. Press the Main ON/OFF button for spraying on the Grip to begin

spraying with suction from the FrontTank.

±WARNING! It is very important to use at least 1/3 of the spray liquid

in the MainTank before switching to suction from the FrontTank.

This will prevent overfilling the MainTank caused by the return flow

from the spray boom.

μATTENTION! Always bleed the air out of the system when

intending to use the spray liquid in the FrontTank, getting trapped

air out of the system is necessary to ensure a steady and

continuous application of the spray liquid.

Spare Parts Information

To see updated spare part information, visit the Agroparts website on

the internet.

Here all parts information can be accessed in the spare parts catalogue:

1. Go to www.agroparts.com, register for free and log in.

2. Select “HARDI” as brand.

3. Select “Online Catalogue”and find your spare part.

4. Online ordering is also possible.

5. Contact your HARDI dealer for further information on spare parts.

User Evaluation

Dear Reader,

We update our assembly instructions regularly. Your suggestions for improvement are appreciated and will help us to create

ever more user-friendly instructions. Send us your suggestions to this e-mail address:

Thank you.

TechDoc@hardi-international.com

HARDI INTERNATIONAL A/S

Herthadalvej 10, DK-4840 Nørre Alslev, DENMARK

Andere Handbücher für Front Tank

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Hardi Spritzpistole Handbücher

Hardi

Hardi ALPHA 2000 Bedienungsanleitung

Hardi

Hardi MEGA VPZ NK Bedienungsanleitung

Hardi

Hardi MASTER PRO VHH Bedienungsanleitung

Hardi

Hardi MUSTANG 3500 Bedienungsanleitung

Hardi

Hardi FALCON Boom Series Bedienungsanleitung

Hardi

Hardi BL Series Bedienungsanleitung

Hardi

Hardi BP15 Bedienungsanleitung

Hardi

Hardi SARITOR 4000 Bedienungsanleitung

Hardi

Hardi LX-MB Series Bedienungsanleitung

Hardi

Hardi Commander Plus Betriebsanleitung

Hardi

Hardi mercury Bedienungsanleitung

Hardi

Hardi ZENIT Bedienungsanleitung

Hardi

Hardi NAVIGATOR 3000 Bedienungsanleitung

Hardi

Hardi ES 50 Bedienungsanleitung

Hardi

Hardi COMMANDER TWIN FORCE Series Bedienungsanleitung

Hardi

Hardi RANGER EAGLE Benutzerhandbuch

Hardi

Hardi NK SB Series Bedienungsanleitung

Hardi

Hardi RANGER EAGLE Bedienungsanleitung

Hardi

Hardi NL Series Bedienungsanleitung

Hardi

Hardi EAGLE 3PT Boom Bedienungsanleitung

Hardi

Hardi ATV Series Bedienungsanleitung

Hardi

Hardi NAVIGATOR 3000 Bedienungsanleitung

Hardi

Hardi NAVIGATOR FORCE Bedienungsanleitung

Hardi

Hardi PRESIDIO 2700 Bedienungsanleitung

Beliebte Spritzpistole Handbücher anderer Marken

SNOWJOE

SNOWJOE Sunjoe 24V-GS-LTW-RM Bedienungsanleitung

Graco

Graco 246737 Gebrauchs- und Pflegehandbuch

Binks

Binks SV100 Bedienungsanleitung

Fimco

Fimco LG-4-3-1 Bedienungsanleitung

AG SPRAY

AG SPRAY FS-ATV-25BL Bedienungsanleitung

Nordson

Nordson MicroMax 2 Bedienungsanleitung

Bonide

Bonide 051 Bedienungsanleitung

zogics

zogics Z-DAS Bedienungsanleitung

KISANKRAFT

KISANKRAFT KK-KBS-165 Bedienungsanleitung

Matrix

Matrix SG 650 Bedienungsanleitung

Anest Iwata

Anest Iwata SGA-3 Kurzanleitung

paasche

paasche VV Datenblatt

Carlisle

Carlisle DeVilbiss JGA-510 Bedienungsanleitung

Gardena

Gardena 11120 Bedienungsanleitung

Conrad

Conrad Hobby Airbrush K3 Bedienungsanleitung

wiwa

wiwa 14025 R/F Bedienungsanleitung

Graco

Graco EM 390 Bedienungsanleitung

DeVilbiss

DeVilbiss LUNA2i Bedienungsanleitung