Harken 9000 Bedienungsanleitung

INSTRUCTIONS

40 and 50 mm Deck Organizers

WARNING! Strictly follow all instructions to avoid an accident, damage to your

vessel, personal injury or death. See www.harken.com/manuals for additional

safety information.

USA –Tel: (+01) 262-691-3320 • Web: www.harken.com • Email: [email protected]

Italy –Tel: (+39) 031.3523511 • Web: www.harken.it • Email: techser[email protected]

Features

Composite top plate - superior impact and UV resistance

Flared bases on sheaves - lift lines off the deck

Glass-filled nylon sheaves - durable with excellent impact resistance

Proven bearing system - journal bearing system

Stackable - provides additional configurations

‡If double stacked, upper block/organizer is two-thirds of listed MWL and breaking load.

DO NOT use Harken equipment for human suspension unless product is speciﬁcally certiﬁed and labeled for such.

Part

No. Description

Sheave

Ø Length Height

Max line

Maximum working

load/sheave‡

mm in mm in mm in mm in kg lb

40 mm Mount using 6 mm or 1/4" ﬂathead (FH) fasteners

9000 2-Sheave 40 1 9/16 104 4 1/16 24 15/16 12 1/2 700 1544

9001 3-Sheave 40 1 9/16 147 5 3/4 24 15/16 12 1/2 700 1544

9002 4-Sheave 40 1 9/16 190 7 15/32 24 15/16 12 1/2 700 1544

9003 5-Sheave 40 1 9/16 233 9 3/16 24 15/16 12 1/2 700 1544

50 mm Mount using 8 mm or 5/16" ﬂathead (FH) fasteners

9005 2-Sheave 50 1 15/16 135 5 5/16 31 1 7/32 16 5/8 1180 2602

9006 3-Sheave 50 1 15/16 191 7 1/2 31 1 7/32 16 5/8 1180 2602

9007 4-Sheave 50 1 15/16 247 9 11/16 31 1 7/32 16 5/8 1180 2602

9008 5-Sheave 50 1 15/16 303 11 15/16 31 1 7/32 16 5/8 1180 2602

Specifications

Planning Installation - Dimensions

Make sure organizer is positioned so it bisects the angle of the lines. If organizer does

not bisect angle the maximum working load is reduced.

WARNING! You must mount to solid deck construction using specified fasteners in

all mounting holes and nuts, washers or backing plates to achieve correct maximum

working load to avoid a failure leading to an accident.

B C D

Description

A Height B End to fastener C Fastener spacing D Fastener to end

mm in mm in mm in mm in

40 mm 24 .95 40.8 1.61 43.13 1.698 20.0 .79

50 mm 30 1.19 53.7 2.11 56.01 2.205 25.0 .98

Planning Installation - Deck Strength

Determine if deck is strong enough for mounting the organizer. Make sure all sheaves

have fasteners that are through bolted using nuts, large washers or backing plates.

Cored decks must have solid inserts such as G-10 plates sized to distribute the load.

IMPORTANT! When organizers are double stacked, more load is put on the deck due to

leverage load of longer screws. Be sure deck construction is strong enough.

Flathead fastener size

40 mm Organizer - 6 mm - 1/4"

50 mm Organizer - 8 mm - 5/16

Through bolted using large washers and nuts

Solid deck construction

Planning Installation - Bisecting Line Angle

Correct Incorrect

Planning Installation - Sheave Loading vs Angle of Deflection

Load on sheave increases when line turns at a greater angle. As the turning angle approaches

180°, the load on the sheave almost doubles. See examples and chart below. Select organizers

and choose mounting locations carefully.

30°

120°

60° 90°

Angle of

deﬂection Load factor

Angle of

deﬂection Load factor

Angle of

deﬂection Load factor

30° 52% 90° 141% 150° 193%

45° 76% 105° 159% 160° 197%

60° 100% 120° 173% 180° 200%

75° 122% 135° 185% — —

Planning Installation - Stacking Organizers

Double stacked maximum working load 40 mm organizer 50 mm organizer

kg lb kg mm

Upper sheaves 466 1029 787 1734

Lower sheaves 700 1544 1180 2602

When organizers are double stacked, fasteners are longer and provide less strength. The

upper sheaves have two thirds (2/3) the maximum working load of the lower sheaves. Use

lower loaded lines in upper sheave or select larger, stronger organizers. Do not triple stack

organizers.

150°

Maintenance and Inspection

M1025 09-18

Periodically inspect organizers and fasteners for wear, corrosion, and loosening. Tighten

or replace as necessary. The organizer does not come apart. Replace the organizer if one

of the sheaves is worn or does not function.

Frequently ﬂush with fresh water. Periodically clean areas shown below with mild

detergent and water solution. Flush with fresh water. Avoid exposure to teak cleaner and

other caustic solutions.

Inspect fasteners for signs of loosening.

Inspect deck for signs of weakening.

Cleaning and flushing points.

Warranty

For additional safety, maintenance, and warranty information see www.harken.com/manuals or the

Harken catalog.

Installation

Install organizer using sealant in holes.

Drill holes to install organizer:

Tip: Put slight bevel at top of hole to allow sealant to mass around upper part of hole.

Organizer Screw size Drill size for clearance hole

40 mm 6 mm 6.25 mm

1/4" 17/64"

50 mm 8 mm 8.25 mm

5/16" 21/64"

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Harken Schiffsausrüstung Handbücher

Harken

Harken MKIV OCEAN Unit 3 Bedienungsanleitung

Harken

Harken 1635 Bedienungsanleitung

Harken

Harken T2 Loop 2148 Bedienungsanleitung

Harken

Harken 391 Montageanleitung

Harken

Harken 1851 Bedienungsanleitung

Harken

Harken T2 Bedienungsanleitung

Harken

Harken R32 Bedienungsanleitung

Harken

Harken Ti-Lite Carbo AirBlock 351 Bedienungsanleitung

Harken

Harken T2 Ratchamatic Block Bedienungsanleitung

Harken

Harken 1567 Bedienungsanleitung

Harken

Harken MKIV Unit 1 Bedienungsanleitung

Harken

Harken 3387 Bedienungsanleitung

Harken

Harken MKIII Bedienungsanleitung

Harken

Harken 394 Montageanleitung

Harken

Harken MKIV Bedienungsanleitung

Harken

Harken T2 Loop 2148 Bedienungsanleitung

Harken

Harken 35.2 ST E Handbuch

Harken

Harken GT326S Bedienungsanleitung

Harken

Harken 3176 Bedienungsanleitung

Harken

Harken C14526 Betriebsanleitung

Harken

Harken HC7906 Bedienungsanleitung

Harken

Harken 3299 Bedienungsanleitung

Harken

Harken 3160 Bedienungsanleitung

Harken

Harken FlatWinder 250 Handbuch

Beliebte Schiffsausrüstung Handbücher anderer Marken

Clarion

Clarion CMS2 Reparaturanleitung

EBS

EBS M7000 Bedienungsanleitung

Kongsberg

Kongsberg M3 Bathy Bedienungsanleitung

NPK

NPK SCS-1002 Bedienungsanleitung

Furuno

Furuno FE-800 Bedienungsanleitung

Simrad

Simrad DD15 Bedienungsanleitung

Notifier

Notifier FS-BSO Bedienungsanleitung

Raymarine

Raymarine ST40 Bedienungsanleitung

E2S

E2S E2XS112UL Bedienungsanleitung

R2Sonic

R2Sonic 2026 Bedienungsanleitung

COBHAM

COBHAM SAILOR 6000 Bedienungsanleitung

Raymarine

Raymarine Maxiview ST80 Benutzerhandbuch

GUIDANCE MARINE

GUIDANCE MARINE 20- Series Montageanleitung

Raymarine

Raymarine ST60 Tridata Benutzerhandbuch

Sonic

Sonic 2024 Bedienungsanleitung

Quicksilver

Quicksilver 88688A25 Handbuch

Furuno

Furuno Navtex NX-700-A Bedienungsanleitung

olympia electronics

olympia electronics ΒS-532/WP Bedienungsanleitung