Harman JBL CINEMA SB190 Bedienungsanleitung

JBL CINEMA SB190

OWNER’S MANUAL

IMPORTANT SAFETY INSTRUCTIONS

Verify Line Voltage Before Use

The JBL CINEMA BAR 190 (soundbar and subwoofer) has

been designed for use with 100-240 volt, 50/60 Hz AC current.

Connection to a line voltage other than that for which your

product is intended can create a safety and re hazard and may

damage the unit. If you have any questions about the voltage

requirements for your specic model or about the line voltage in

your area, contact your retailer or customer service representative

before plugging the unit into a wall outlet.

Do Not Use Extension Cords

To avoid safety hazards, use only the power cord supplied

with your unit. We do not recommend that extension cords be

used with this product. As with all electrical devices, do not run

power cords under rugs or carpets, or place heavy objects on

them. Damaged power cords should be replaced immediately

by an authorized service center with a cord that meets factory

specications.

Handle the AC Power Cord Gently

When disconnecting the power cord from an AC outlet, always

pull the plug; never pull the cord. If you do not intend to use this

speaker for any considerable length of time, disconnect the plug

from the AC outlet.

Do Not Open the Cabinet

There are no user-serviceable components inside this product.

Opening the cabinet may present a shock hazard, and any

modication to the product will void your warranty. If water

accidentally falls inside the unit, disconnect it from the AC power

source immediately, and consult an authorized service center.

www.jbl.com

English

TABLE OF CONTENTS

IMPORTANT SAFETY INSTRUCTIONS 2

1 INTRODUCTION 4

2 WHAT’S IN THE BOX 4

3 PRODUCT OVERVIEW 5

3.1 CONTROLS AND INDICATORS 5

3.2 CONNECTORS 5

3.3 SUBWOOFER 5

3.4 REMOTE CONTROL 6

4 PLACE 7

4.1 DESKTOP PLACEMENT 7

4.2 WALL-MOUNTING 7

5 CONNECT 8

5.1 CONNECTION WITH YOUR TV AND DIGITAL DEVICES 8

5.2 BLUETOOTH CONNECTION 10

6 PLAY 11

6.1 POWER-ON/AUTO STANDBY/AUTO WAKEUP 11

6.2 PLAY FROM THE TV SOURCE 11

6.3 PLAY FROM THE HDMI IN SOURCE 12

6.4 PLAY FROM THE BLUETOOTH SOURCE 12

7 SOUND SETTINGS 13

7.1 DOLBY ATMOS®(VIRTUAL) 13

7.2 PRE-DEFINED EQ SETTINGS 13

7.3 VOICE MODE 14

7.4 BASS BOOST 14

8 RESTORE FACTORY SETTINGS 15

9 SOFTWARE UPDATE 15

10 RE-CONNECT THE SUBWOOFER 16

11 PRODUCT SPECIFICATIONS 16

12 TROUBLESHOOTING 17

13 TRADEMARKS 18

1 INTRODUCTION

Thank you for purchasing the JBL CINEMA BAR 190 (soundbar

and subwoofer) which is designed to bring an extraordinary sound

experience to your home entertainment system. We encourage

you to take a few minutes to read through this manual, which

describes the product and includes step-by-step instructions for

setting up and getting started.

To make the most of product features and support, you

may need to update the product software through the USB

connector in the future. Refer to the software update section

in this manual to ensure that your product has the latest

software.

Designs and specications are subject to change without notice.

If you have any questions about the soundbar, installation or

operation, please contact your retailer or customer service

representative, or visit our website: www.jbl.com.

2 WHAT’S IN THE BOX

Unpack the box carefully and ensure that the following parts are

included. If any part is damaged or missing, do not use it and

contact your retailer or customer service representative.

Main unit

Subwoofer

Remote control (with 2 AAA batteries)

(AAA)

Power cord*

x 2

* Power cord quantity and plug type vary by region.

HDMI cable

Wall-mounting kit

Product information & wall-mounting template

www.jbl.com

English

3 PRODUCT OVERVIEW

3.1 Controls and indicators

1 2 3 4

1. (Power)

• Switch on or to standby

2. -/+ (Volume)

• Decrease or increase the volume

• Press and hold to decrease or increase the volume

continuously

• Press the two buttons together to mute or unmute

3. (Source)

• Select a sound source: HDMI ARC (default, TV

connected through the

connector), HDMI IN (digital device connected through

the connector), Optical (TV / digital device

connected through the connector), or

Bluetooth

4. Status indicators

Solid red Entering standby mode

Solid white HDMI ARC source selected

Solid yellow HDMI IN source selected

Solid amber Optical source selected

Solid blue Connected to Bluetooth

Fast ﬂashing blue Entering Bluetooth pairing mode

Solid green Playing Dolby Atmos audio

\Flashing (current sound

source) Volume change ongoing

\Slow ﬂashing (current

sound source)

Maximum / minimum volume

level reached

\Continuous slow ﬂashing

(current sound source) Sound muted

3.2 Connectors

1 2 3 4 5

• Connect to power

• USB connector for software update

• Connect to a USB storage device for audio play (for the

US version only)

• Connect to the HDMI ARC / HDMI eARC input on your TV

• Connect to the HDMI output on your digital device

• Connect to the optical output on your TV or digital device

3.3 Subwoofer

AC~ PAIRAC~ PAIR

• Connect to power

2. Connection status indicator

Solid amber Connected to the soundbar

Fast ﬂashing amber Pairing mode

Slow ﬂashing amber Standby mode

• Press and hold to reconnect the subwoofer with the

soundbar

3.4 Remote Control

• Switch on or to standby

2. Source selectors

• Select the HDMI IN source

• Select the HDMI ARC source

• Select the Optical source

• Select the Bluetooth source

• Press and hold to connect another Bluetooth device

3. Sound effect buttons

/ /

• Select the pre-dened EQ (equalizer) settings for news/

music/ movie

• Select the voice mode to enhance vocal clarity

• Switch on or off the virtual Dolby Atmos®sound effects

(Default: on)

• Switch on or off the bass boost (Default: on)

4. Playback buttons

I/I

• Bluetooth source: Skip to the previous or next track

• Bluetooth source: Start or pause playback

5. + / -

• Increase or decrease the volume

• Press and hold to increase or decrease the volume

continuously.

6. (Mute)

• Mute/unmute

www.jbl.com

English

4 PLACE

4.1 Desktop placement

Place the soundbar and subwoofer on a at and stable surface.

Make sure that the subwoofer is at least 3 ft (1 m) away from the

soundbar, and 4" (10 cm) away from a wall.

> 10cm/4”

1m/3ft

2.5-3.0 m / 8.2-9.8 ft

5 cm / 2”

NOTES:

−The power cord shall be properly connected to power.

−Do not place any objects on the top of the soundbar or subwoofer.

−Make sure that the distance between the subwoofer and the soundbar

is less than 20 ft (6 m).

4.2 Wall-mounting

>2” (50mm)

1a)

1c)

≤8 mm/0.31" 4mm/ 0.16"

≥30 mm/1.18"

1b)

Figure 1

1. Preparation:

a) With a minimum distance of 2" (50mm) from your TV, stick

the supplied wall-mounting template to a wall by using

adhesive tapes.

b) Use your ballpen tip to mark the screw holder location.

Remove the template.

c) On the marked location, drill a 4 mm/0.16" hole. Refer to

Figure 1 for the screw size.

2. Install the wall-mounting bracket.

3. As shown in the diagram, remove the fastening screw by

using a screwdriver.

4. Fasten the wall-mounting screw included in the supplied

mounting kit.

5. Mount the soundbar.

NOTES:

−Make sure that the wall can support the weight of the soundbar.

−Install on a vertical wall only.

−Avoid a location under high temperature or humidity.

−Before wall-mounting, make sure that cables can be properly

connected between the soundbar and external devices.

−Before wall-mounting, make sure that the soundbar is unplugged from

power. Otherwise, it may cause an electric shock.

5 CONNECT

5.1 Connection with your TV and digital devices

For audio playback through the soundbar, connect the soundbar

with your TV through the supplied HDMI cable or an optical cable

(sold separately).

An HDMI connection supports digital audio and video with a

single connection. HDMI connectivity is the best option for your

soundbar.

TV (HDMI ARC)

(Recommended connection for the best Dolby Atmos experience)

HDMI IN

HDMI OUT

TV eARC/ARC

HDMI OUT

HDMI (ARC)

1. Connect the soundbar with the HDMI IN (ARC) connector on

your TV by using the supplied HDMI cable.

• On your TV, check that HDMI-CEC and HDMI ARC have

been enabled. Refer to the owner’s manual of your TV for

more information.

2. Use an HDMI cable (V2.0 or later) to connect the soundbar

with your digital device, such as a set-top box, DVD/Blu-ray

player or game console.

• On your digital device, check that HDMI-CEC has been

enabled. Refer to the owner’s manual of your digital

device for more information.

• On your digital device, select “Bitstream” or “Raw data”

in the audio output settings for the best Dolby Atmos

experience.

3. To play audio from the digital device connected to the

soundbar, select on the remote control.

NOTES:

−If your TV does not support HDMI eARC, make sure that you connect

your digital device through the HDMI IN connector on the soundbar

instead of your TV. Otherwise, the Dolby Atmos information cannot

pass through the HDMI (ARC / eARC) connectors to the soundbar.

www.jbl.com

English

TV (HDMI eARC)

HDMI (eARC)

HDMI IN

HDMI OUT

TV eARC/ARC

1. Connect the soundbar with the connector

on your TV by using the supplied HDMI cable.

• On your TV, check that HDMI-CEC and HDMI eARC have

been enabled. Refer to the owner’s manual of your TV for

more information.

2. Use an HDMI cable (eARC compatible, V2.0 or later) to connect

your TV with your digital device, such as a streaming device,

set-top box, DVD/Blu-ray player or game console.

• On your digital device, check that HDMI-CEC has been

enabled. Refer to the owner’s manual of your digital

device for more information.

• On your TV and digital device, select “Bitstream” or “Raw

data” in the audio output settings for the best Dolby

Atmos experience.

3. To play audio from the digital device connected to your TV,

select on the remote control.

OPTICAL

HDMI IN

HDMI OUT

OPTICAL

OPT

NOTES:

−With the Virtual Dolby Atmos design, the Dolby surround upmixer of

the soundbar can expand the legacy channel-based audio of Dolby

Digital format, including 5.1 and 7.1 content, and provide an immersive

3D Atmos experience.

1. Connect the soundbar with your TV by using an optical cable.

2. Use an HDMI cable (V2.0 or later) to connect your TV with your

digital device, such as a streaming device, set-top box, DVD/

Blu-ray player or game console.

3. To play audio through the optical cable, select on the

remote control.

NOTES:

−* The HDMI cable (for digital device connection) and the optical cable

are sold separately.

−Full compatibility with all HDMI-CEC devices is not guaranteed.

1010

5.2 Bluetooth connection

Through Bluetooth, connect the soundbar with your Bluetooth

device, such as a smartphone, tablet and laptop.

Bluetooth

DEVICES

JBL CINEMA SB190

Now Discoverable

Connected

< 10 m / 33 ft

Connect a Bluetooth device

1. Press to switch on (See “6.1 Power-on/Auto standby/Auto

wakeup” in the “6 PLAY” chapter).

2. To select the Bluetooth source, press on the soundbar or

on the remote control.

→Ready for pairing: The status indicator ashes blue.

3. On your Bluetooth device, enable Bluetooth and search for

“JBL CINEMA SB190” within three minutes.

→Connected: The status indicator lights up solid blue. A

conrmation tone is heard.

To reconnect the last paired device

Your Bluetooth device is retained as a paired device when the

soundbar goes to standby mode. Next time you switch to the

Bluetooth source, the soundbar reconnects the last paired

device automatically.

To connect to another Bluetooth device

1. In the Bluetooth source, press and hold on the soundbar or

on the remote control until the status indicator ashes blue.

→The soundbar enters the Bluetooth pairing mode. The

status indicator ashes blue.

2. Follow Step 3 under “Connect a Bluetooth device”.

• If the device has ever been paired with the soundbar, rst

unpair “JBL CINEMA SB190” on the device.

NOTES:

−The Bluetooth connection will be lost if the distance between the

soundbar and Bluetooth device exceeds 33 ft (10 m).

−Electronic devices may cause radio interference. Devices that generate

electromagnetic waves must be kept away from the soundbar, such

as microwaves and wireless LAN devices.

Andere Handbücher für JBL CINEMA SB190

Inhaltsverzeichnis

Andere Harman Lautsprechersystem Handbücher

Harman

Harman JBL Professional BRX 300 Series Bedienungsanleitung

Harman

Harman JBL BAR 9.1 Bedienungsanleitung

Harman

Harman Primus Infinity 250 Bedienungsanleitung

Harman

Harman JBL CINEMA SB550 Bedienungsanleitung

Harman

Harman JBL BAR 5.1 SURROUND Bedienungsanleitung

Harman

Harman JBL CINEMA SB260 Bedienungsanleitung

Harman

Harman Kardon SB 16 Bedienungsanleitung

Harman

Harman JBL Bar 2.0 ALL-IN-ONE Bedienungsanleitung

Harman

Harman JBL Cruise X Bedienungsanleitung

Harman

Harman JBL BAR 800 Bedienungsanleitung

Harman

Harman JBL JEMBE WIRELESS Bedienungsanleitung

Harman

Harman JBL CINEMA SB270 Bedienungsanleitung

Harman

Harman JBL CINEMA SB160 Bedienungsanleitung

Harman

Harman JBL BOOST TV Bedienungsanleitung

Harman

Harman JBL Bar 5.1 CNTR Bedienungsanleitung

Harman

Harman JBL BAR 9.1 Bedienungsanleitung

Harman

Harman JBL BAR 2.0 ALL-IN-ONE MK2 Bedienungsanleitung

Harman

Harman JBL CINEMA SB400 Bedienungsanleitung

Harman

Harman JBL BAR 5.1 SURROUND Bedienungsanleitung

Harman

Harman JBL BAR 300 Bedienungsanleitung

Harman

Harman JBL LINK BAR Installationsanleitung

Harman

Harman JBL EON ONE Compact Bedienungsanleitung

Harman

Harman JBL ProCoustics MS-2 Bedienungsanleitung

Harman

Harman JBL BAR 2.1 Bedienungsanleitung

Beliebte Lautsprechersystem Handbücher anderer Marken

JVC

JVC CA-MXK5R Bedienungsanleitung

LG NB4532B Bedienungsanleitung

JVC

JVC CA-FSH100 Bedienungsanleitung

5Core

5Core Pro Series Bedienungsanleitung

EAW

EAW MQV1394e Bedienungsanleitung

Lynx

Lynx GXR-LA10A Bedienungsanleitung

iLive

iLive ITB066B Bedienungsanleitung

RDX

RDX QuickStation 4 Bedienungsanleitung

Electro-Voice

Electro-Voice S-122 Bedienungsanleitung

Sven

Sven SPS-619 GOLD Bedienungsanleitung

Pioneer

Pioneer CS-7070 Bedienungsanleitung

EAW

EAW UB82e Bedienungsanleitung

Sondpex

Sondpex Active Speaker System and Digital Music... Bedienungsanleitung

JVC

JVC NX-PN7 Bedienungsanleitung

Yamaha

Yamaha NX-A01 - Speaker Sys Bedienungsanleitung

SE Audiotechnik

SE Audiotechnik I-LINE Bedienungsanleitung

Gemini

Gemini WRX-843 Series Bedienungsanleitung

TCL

TCL 6100 Series Bedienungsanleitung