Harman JBL CINEMA SB180 Bedienungsanleitung

JBL CINEMA SB180

OWNER’S MANUAL

IMPORTANT SAFETY INSTRUCTIONS

Verify Line Voltage Before Use

The JBL CINEMA SB180 (soundbar and

subwoofer) has been designed for use with 100-

240 volt, 50/60 Hz AC current. Connection to a

line voltage other than that for which your product

is intended can create a safety and ﬁre hazard

and may damage the unit. If you have any

questions about the voltage requirements for your

speciﬁc model or about the line voltage in your

area, contact your retailer or customer service

representative before plugging the unit into a wall

outlet.

Do Not Use Extension Cords

To avoid safety hazards, use only the power cord

supplied with your unit. We do not recommend

that extension cords be used with this product. As

with all electrical devices, do not run power cords

under rugs or carpets, or place heavy objects on

them. Damaged power cords should be replaced

immediately by an authorized service center with

a cord that meets factory speciﬁcations.

Handle the AC Power Cord Gently

When disconnecting the power cord from an AC

outlet, always pull the plug; never pull the cord. If

you do not intend to use this speaker for any

considerable length of time, disconnect the plug

from the AC outlet.

Do Not Open the Cabinet

There are no user-serviceable components inside

this product. Opening the cabinet may present a

shock hazard, and any modiﬁcation to the product

will void your warranty. If water accidentally falls

inside the unit, disconnect it from the AC power

source immediately, and consult an authorized

service center.

www.jbl.com

English

TABLE OF CONTENTS

IMPORTANT SAFETY INSTRUCTIONS 2

2 WHAT’S IN THE BOX 4

3 PRODUCT OVERVIEW 5

3.1 CONTROLS AND INDICATORS 5

3.2 CONNECTORS 6

3.3 SUBWOOFER 6

3.4 REMOTE CONTROL 6

4 PLACE 7

5 CONNECT 8

5.1 TV CONNECTION 8

5.2 BLUETOOTH CONNECTION 9

6 PLAY 9

6.1 POWER-ON/AUTO STANDBY/AUTO

WAKEUP 9

6.2 PLAY FROM THE TV SOURCE 10

6.3 PLAY FROM THE BLUETOOTH

SOURCE 10

7 SOUND SETTINGS 11

8 RESTORE FACTORY SETTINGS 12

9 SOFTWARE UPDATE 12

10 RE-CONNECT THE SUBWOOFER 13

12 TROUBLESHOOTING 14

11 PRODUCT SPECIFICATIONS 13

13 TRADEMARKS 15

4.1 DESKTOP PLACEMENT 7

4.2 WALL-MOUNTING 7

1 INTRODUCTION 4

1 INTRODUCTION

Thank you for purchasing the JBL CINEMA SB180

(soundbar and subwoofer) which is designed to

bring an extraordinary sound experience to your

home entertainment system. We encourage you

to take a few minutes to read through this manual,

which describes the product and includes step-by-

step instructions for setting up and getting started.

To make the most of product features and support,

you may need to update the product software

through the USB connector in the future. Refer to

the software update section in this manual to

ensure that your product has the latest software.

Designs and speciﬁcations are subject to change

without notice. If you have any questions about

the soundbar, installation or operation, please

contact your retailer or customer service

representative, or visit our website: www.jbl.com.

Unpack the box carefully and ensure that the

following parts are included. If any part is

damaged or missing, do not use it and contact

your retailer or customer service representative.

2 WHAT’S IN THE BOX

Main unit

Subwoofer

Remote control (with 2 AAA batteries)

Power cord*

x 2

*Power cord quantity and plug type vary by region.

HDMI cable

POWER ON

ARC

OPT

VOLUME LEVEL 8

USB

NO BT

MUTE OR VOL 0

SONG

CINEMA

CONNECTING SUB

POWER OFF

STOP

PLAYTIME

DISCONNECT SUB

www.jbl.com

English

1 2 3 4

Select a sound source: Bluetooth (default) or HDMI ARC

(TV connected through the HDMI ARC connector), or

Optical (TV / digital device connected through the

OPTICALconnector)

Wall-mounting kit 3 PRODUCT OVERVIEW

Product information & wall-mounting template

(Power)

Switch on or to standby

-/+(Volume)

Decrease or increase the volume

Press and hold to decrease or increase the volume

continuously

Press the two buttons together to mute or unmute

(Source)

3.1 Controls and indicators

Status indicators

●

3.3 Subwoofer

3.4 Remote Control

1234

3.2 Connectors

Connect to power

USB connection for software upgrade and

MP3 playback.

Connect to the HDMI ARC input on your TV

Connect to the optical output on your TV

or digital device

●

Connect to power

Press and hold to diconnect the connection

subwoofer with the soundbar.

Connection status indicator

PAIR

Solid blue

Flashing red Pairing mode

Connected to the soundbar

●

SONG

CIN

Press to switch on the unit. Press it again to put

the unit in standby mode.

Press to temporarily pause a playback. Press it

again to resume the playback.

Press and hold this button for 3 seconds to

disconnect bluetooth connection.

Press to skip to the next track.

Press to return to the previous track.

Press to enter the BT(Bluetooth) mode.

Press to enter the TV equalizer mode.

Press repeatedly to switch among BLUETOOTH,

USB,OPTICAL IN and ARC mode.

Press to temporarily switch off the sound . Press it

again to switch it on.

Press [VOLUME+] to turn up the volume.

Press [VOLUME-] to turn down the volume.

Press to enter the SONG equalizer mode.

Press to enter the СIN equalizer mode.

●

1 STANDBY

2 VOLUME+

3 PREVIOUS

4 PLAY/PAUSE

5 VOLUME-

6 BLUETOOTH

7 CIN

8 SONG

9 MUTE

10 NEXT

11 SOURCE

12 TV

www.jbl.com

English

Place the soundbar and subwoofer on a ﬂat and

stable surface. Make sure that the subwoofer is at

least 3 ft (1 m) away from the soundbar, and 4”

(10 cm) away from a wall.

NOTES:

− The power cord shall be properly connected to power.

− Do not place any objects on the top of the soundbar or

subwoofer.

− Make sure that the distance between the subwoofer and

the soundbar is less than 20 ft (6 m).

730mm

Diagram 1

Diagram 2

Diagram 3

In order to prevent injuries,the sound bar device must be

securely fasten to the wall in accordance with the below

installation instructions.

1.Drill the two holes(about 6mm diameter ) in the wall

and keep the distance between drill holes of the sound

bar is 730mm. As shown in the picture on the right.

Insert the two plugs supplied into two drilled holes and

then insert two screws supplied into two holes and

tighten.As shown in the picture above(diagram 1).

2. Take care to leave 4 mm between the screw heads and

wall.As shown in the picture above(diagram 2).

3.Use the assembled sound bar to hang on the setscrews

on the wall .As shown in the picture above(diagram 3).

NOTES:

− Make sure that the wall can support the weight of

the soundbar.

− Install on a vertical wall only.

− Avoid a location under high temperature or humidity.

− Before wall-mounting, make sure that cables can be

properly connected between the soundbar and

external devices.

− Before wall-mounting, make sure that the soundbar

is unplugged from power. Otherwise, it may cause an

electric shock.

4 PLACE 4.2 Wall-mounting

4.1 Desktop placement

•

5.1 TV connection

Connect the soundbar with your TV through the supplied

HDMI cable or an optical cable (sold separately).

Through the supplied HDMI cable

An HDMI connection supports digital audio and video with a

single connection. HDMI connectivity is the best option for

your soundbar.

1. Connect the soundbar with your TV by using the

supplied HDMI cable.

2. On your TV, check that HDMI-CEC and HDMI

ARC have been enabled. Refer to the owner’s

manual of your TV for more information.

NOTES:

− Full compatibility with all HDMI-CEC devices is

not guaranteed.

− Contact your TV manufacturer if you have

problems with the HDMI-CEC compatibility of

your TV.

Connect the soundbar with your TV by using an

optical cable (sold separately).

●

Select OPT

Select HDMI ARC

5 CONNECT

Through an optical cable

www.jbl.com

English

CINEMA SB180

Through Bluetooth, connect the soundbar with your

Bluetooth device, such as a smartphone, tablet and

laptop.

Bluetooth connection

Through Bluetooth, connect the soundbar with your Bluetooth

device, such as a smartphone, tablet and laptop.

1-Press STANDBY button on the remote control to power on

the sound bar

2- To select a Bluetooth signal source, press the [ ] button

on the remote control, or on the bar, until the word “no bt”

appears on the bar display, the soundbar is ready to pairing

the bluetooth signal.

3- On your Bluetooth device, enable Bluetooth and search for

“CINEMA SB180”, input the password 0000 if need the

password prompt, the sound bar will synchronize to play

songs on your device as long as the word “bt” remains solid

and a beep will be heard, which means that the connection

was successfully.

Disconnected the bluetooth on the device to switched oﬀ the

bluetooth connection.

Notes:

The Bluetooth connection will be lost if the distance

between the soundbar and Bluetooth device exceeds 33 ft

(10 m).

The CINEMA SB180 model is not excluded from your list

of connections on your device.

In bluetooth mode, [PLAY/PAUSE],[NEXT], [PREVIOUS],

[VOLUME+/-] etc. are also active.

Electronic devices may cause radio interference. Devices

that generate electromagnetic waves must be kept away

from the soundbar, such as microwaves and wireless LAN

devices.

1. Connect the soundbar and subwoofer to power by using

the supplied power cords.

2. Press to switch on.

→ The subwoofer is connected to the soundbar automatically.

Connected: The connection status indicator turns solid blue.

NOTES:

− Use the supplied power cord only.

− Before switching on the soundbar, make sure that you have

completed all other connections (See ”5.1 TV connection” in

the ”5 CONNECT”chapter).

Auto standby

If the soundbar is inactive for more than 10 minutes, it will

switch to standby mode automatically. The subwoofer also

goes to standby, and the connection status indicator turns

slow ﬂashing red.

Next time you switch on the soundbar, it returns to the last

selected source.

Auto wakeup

In standby mode, the soundbar will wake up automatically

when

the soundbar is connected to your TV through the HDMI

ARC connection and your TV is switched on;

the soundbar is connected to your TV through an optical

cable and audio signals are detected from the optical cable.

the subwoofer and the soundbar is less than 20 ft (6 m).

●

5.2 Bluetooth connection 6 PLAY

6.1 Power-on/Auto standby/Auto wakeup

Switch on

●

1010

<10m/33ft

1.Make sure that your TV is set to support external speakers

and the built-in TV speakers are disabled. Refer to the

owner’s manual of your TV for more information.

2.Make sure that the soundbar has been properly connected

to your TV (See ”5.1 TV connection” in the ”5

CONNECT”chapter).

3.Press [ ] button repeatedly on the remote control

to select ARC or OPTICAL mode.

4.After making the connections and turning on the product, if

the audio does not start automatically, check your television's

manual how to conﬁgure the audio.

With the soundbar connected, you can enjoy TV audio from

the soundbar speakers.

6.2.1 TV remote control setup

To use your TV remote control for both your TV and the

soundbar, check that your TV supports HDMI-CEC. If your

TV does not support HDMI-CEC, follow the steps under ”TV

remote control learning”.

HDMI-CEC

If your TV supports HDMI-CEC, enable the functions as

instructed in your TV user manual. You can control the

volume +/-, sound

source, and power on/standby functions on your soundbar

through the TV remote control.

Through Bluetooth, connect the soundbar with your

Bluetooth device, such as a smartphone, tablet and

laptop.

1-Press STANDBY button on the remote control to

power on the sound bar

2- To select a Bluetooth signal source, press the [ ]

button on the remote control, or on the bar, until the

word “no bt” appears on the bar display, the soundbar is

ready to pairing the bluetooth signal.

3- On your Bluetooth device, enable Bluetooth and

search for “CINEMA SB180”, input the password 0000 if

need the password prompt, the sound bar will

synchronize to play songs on your device as long as the

word “bt” remains solid and a beep will be heard, which

means that the connection was successfully.

4.Start audio play on your Bluetooth device.

5.Adjust the volume on the soundbar or your Bluetooth

device.

Through Bluetooth, stream audio from your Bluetooth

device to the soundbar.

6.2 Play from the TV source 6.3 Play from the Bluetooth source

Inhaltsverzeichnis

Andere Harman Sprecher Handbücher

Harman

Harman JBL PartyBoxEncore Bedienungsanleitung

Harman

Harman JBL PRX900 Series Bedienungsanleitung

Harman

Harman JBL 4312SE Bedienungsanleitung

Harman

Harman Axys ABF-260/100W PA6 V0 Low Profile Bedienungsanleitung

Harman

Harman Infinity Fuze Pint Bedienungsanleitung

Harman

Harman JBL Link 20 Technisches Datenblatt

Harman

Harman JBL BOOMBOX2 Bedienungsanleitung

Harman

Harman JBL SRX800 Series Bedienungsanleitung

Harman

Harman MIB GLOBAL ENTRY Bedienungsanleitung

Harman

Harman JBL SU Center Bedienungsanleitung

Harman

Harman Infiniy CLUBZ 150 Bedienungsanleitung

Harman

Harman JBL IRX ONE Bedienungsanleitung

Harman

Harman JBL QUANTUM Stream Bedienungsanleitung

Harman

Harman harman/kardon Go+Play Bedienungsanleitung

Harman

Harman Authentics L16 Bedienungsanleitung

Harman

Harman JBL GT0949 LIMITED EDITION Bedienungsanleitung

Harman

Harman JBL Wind 2 Bedienungsanleitung

Harman

Harman JBL Professional 3 Series Bedienungsanleitung

Harman

Harman JBL Professional PRX ONE Bedienungsanleitung

Harman

Harman Harman/kardon OMNI 10+ Bedienungsanleitung

Harman

Harman JBL BAR 2.1 DEEP BASS Bedienungsanleitung

Harman

Harman JBL G Series Bedienungsanleitung

Harman

Harman JBL Link Portable Bedienungsanleitung

Harman

Harman Infinity KAPPA 53XF Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung