Harman JBL Soundpoint SP5 Bedienungsanleitung

SP5, SP6, SP6C, SP6CS,

SP8, SP8C

SOUNDPOINT™SERIES

OWNER’S GUIDE

INCLUDED

Template/paint

shield.

Remove paint

shield (inner

rectangle) at

perforation.

One pair of speakers with

grilles.

Template/paint

shield.

Remove paint

shield (inner

circle) at

perforation.

One pair of speakers with

grilles (SP6C and SP8C). Model

SP6CS includes only one loud-

speaker, since it is capable of

reproducing two channels of

audio.

THANK YOU FOR CHOOSING JBL

400– 600

WALL

FRONT SPEAKERS

SPEAKER PLACEMENT

SP5, SP6, SP8

SP6C, SP6CS, SP8C

For more than 50 years, JBL

has been involved in every

aspect of music and film

recording and reproduction,

from live performances to

monitoring the recordings

you play in your home,

car or office.

We’re confident that the

JBL loudspeakers you have

chosen will provide every

note of enjoyment that you

expected – and that when

you think about purchasing

additional audio equipment for

your home, car or office, you

will once again choose JBL.

Please take a moment to

Web site at www.jbl.com. It

enables us to keep you posted

on our latest advancements,

and helps us to better under-

stand our customers and build

products that meet their

needs and expectations.

JBL Consumer Products

WALL WALL

5 – 6 ft.

WALL WALL

MODELS SP5, SP6, SP8 AS REAR SPEAKERS

MODELS SP6C, SP6CS, SP8C IN CEILING

Proper placement of the

speakers is an important step

in obtaining the most realistic

soundstage possible. These

recommendations are for the

optimum placement of the loud-

speakers. Use these placement

recommendations as a guide.

Slight variations will not dimin-

ish your listening pleasure.

The front speakers should be

placed the same distance from

each other as they are from the

listening position. They should

be placed at about the same

height from the floor as the

listener’s ears will be, with

the tweeters aimed toward the

listener at ear-level height.

In a home theater configuration,

the two surround speakers

should be placed slightly behind

the listening position and ideally

should face each other and be

at a level higher than the lis-

tener’s ears. If that is not possi-

ble, they may be placed in a

wall (or in the ceiling) behind

the listening position, facing for-

ward. The surround speakers

should not call attention to

themselves. They should

provide a diffuse, ambient

sound accompanying the main

program material heard in the

front speakers. In Dolby* Digital

and DTS®systems, aim the

tweeters toward the listening

position at ear-level height.

MODEL SP6CS

Model SP6CS has the capability

of playing two channels

through one loudspeaker,

thanks to its dual-tweeter/dual-

voice-coil construction. Since

the tweeters are close together,

in general they should be aimed

away from each other for best

coverage.

For two-channel (stereo) appli-

cations, e.g., as a single speaker

in a remote room of a distrib-

uted audio system, install the

SP6CS speaker centrally in the

ceiling for best stereo imaging,

swiveling the tweeters so that

one points toward the left and

the other toward the right of the

listening position, aimed at ear-

level height.

The SP6CS may also be used to

play the left and right surround

channels in a 5.1-channel home

theater system, in which case it

should be mounted in the ceil-

ing slightly behind the listening

position, centered from left to

right and with the tweeters

pointing toward the left and

right of the listening position,

aimed at ear-level height. For

7.1-channel systems where it

is desired to use two SP6CS

speakers, one to play both the

left surround and surround

back channels and the other to

play both the right surround and

surround back channels, mount

each SP6CS speaker in the

ceiling, slightly behind the lis-

tening position, one closer to

the left side of the room and the

other closer to the right side.

Aim the tweeters away from

each other, toward the front

and rear of the room.

Phillips #2 screwdriver

Measuring tape Utility knife

Pencil

Carpenter’s level Awl

TOOLS NEEDED

The SoundPoint Series in-wall

speakers were

designed to be

easily installed. However, if you

are unsure of your ability to prop-

erly install these loudspeakers,

please contact your dealer or a

qualified installer.

INSTALLATION

The wires for both speakers

should be the same length. If

one speaker is placed closer to

the amplifier than the other,

hide the excess wire behind

the wall. Speakers and elec-

tronics terminals have corre-

sponding (+) and (–) terminals.

Most manufacturers of speakers

and electronics, including JBL,

use red to denote the (+) termi-

nal and black for the (–) termi-

nal. It is important to connect

both speakers identically: (+) on

the speaker to (+) on the ampli-

fier and (–) on the speaker to (–)

on the amplifier. Wiring “out

of phase” results in thin sound,

weak bass and a poor stereo

image. With the advent of multi-

channel surround sound

systems, connecting all of the

speakers in your system with

CONNECTION TIPS

WIRE LENGTH RECOMMENDED SIZE

Up to 20 ft. 16 gauge

Up to 30 ft. 12 gauge

Greater than 30 ft. 10 gauge

††

the correct polarity remains

equally important in order to

preserve the proper ambience

and directionality of the

program material.

To use the push-type speaker

terminals, press the red (+) or

black (–) cap for the desired

terminal, insert the bare end of

the speaker wire into the hole

below the cap and release the

cap. Gently tug on the wire

to make sure that it is fully

inserted.

SPEAKER CONNECTIONS

†For model SP6CS, the terminals for

both the left and right channels will

be on the same loudspeaker.

SP5, SP6, SP8

EXISTING CONSTRUCTION

Remove the grille from the

speaker frame by pulling on

the paper tab. If the tab is

missing, to avoid scratching

the grille or baffle you may

unfold a paper clip, insert the

straight end through one of the

holes in the grille, and gently

pull up.

Determine the correct speaker

location.

Note: Remove the inner template,

which is the paint shield, at the

perforation. Use the outer tem-

plate when cutting the drywall.

Note: Always allow at least

one-half inch between a wall

stud and the speaker cutout or

the locking tabs will not be able

to swivel into place.

≥1/2"

Cut the drywall. Connect the speaker wires

to the speaker.

Replace the metal grille.

Place the frame assembly

in the wall.

Screw down each of the four

Phillips head screws. The

locking tabs will swivel into

place and secure the unit to

the rear surface of the drywall.

The SoundPoint speakers fea-

ture unique swivel mounts for

the tweeters that enable you

to aim the very directional

high frequencies toward the

listening position, at ear-level

height. Before installing the

speaker grille, gently press on

the outer edge of the tweeter

mount to adjust the position of

the tweeter. The tweeter will

not swivel more than 15

degrees in any direction; do

not attempt to force it to move

further. You may also rotate

the tweeter to orient the JBL

logo as desired.

SP6C, SP6CS, SP8C

EXISTING CONSTRUCTION

Remove the grille from the

speaker frame by pulling on

the paper tab. If the tab is

missing, to avoid scratching

the grille or baffle you may

unfold a paper clip, insert the

straight end through one of

the holes in the grille, and

gently pull up.

≥1/2"

Cut the drywall.

Note: Always allow at least

one-half inch between a wall

stud and the speaker cutout or

the locking tabs will not be able

to swivel into place.

Connect the speaker wires to

the speaker. Model SP6CS

requires two sets of speaker

wires, one for each channel.

Place the frame assembly

in the wall. Screw down each of the four

Phillips head screws. The

locking tabs will swivel into

place and secure the unit to

the rear surface of the drywall.

Replace the metal grille.

Determine the correct speaker

location.

Note: Remove the inner template,

which is the paint shield, at the

perforation. Use the outer tem-

plate when cutting the drywall.

The SoundPoint speakers fea-

ture unique swivel mounts for

the tweeters that enable you

to aim the very directional

high frequencies toward the

listening position, at ear-level

height. Before installing the

speaker grille, gently press on

the outer edge of the tweeter

mount to adjust the position of

the tweeter. The tweeter will

not swivel more than 15

degrees in any direction; do

not attempt to force it to move

further. You may also rotate

the tweeter to orient the JBL

logo as desired.

The dual tweeters of the

SP6CS speaker may be

swiveled independently.

Optimum imaging will be

obtained by aiming the

tweeters to the left and right

of the listening position, at

ear-level height, if your

application permits.

NEW CONSTRUCTION

PAINTING THE SPEAKER

FRAME AND GRILLE

SoundPoint Series loud-

speakers can be painted to

match any decor. If you wish

to change their color, the satin

finish on the grille and frame

will function as a primer coat.

Before painting, install the

paint shield (inner section of

template in the assembly kit)

securely into the recess in the

baffle. This will protect the

speaker components and baf-

fle from paint residue. Use a

high-quality spray paint, and

apply a thin coat of color.

Be certain the grille perfora-

tions remain free of paint.

Filling them with paint will

diminish the sound quality.

Note: Gently remove the

acoustical foam blanket from

the grille before painting.

Reattach the blanket after

the paint has dried.

You will need to purchase the correct rough-in frame kit for your model:

SPEAKER MODEL ROUGH-IN FRAME KIT

SP5 RIF5

SP6 RIF6

SP6C and SP6CS RIF6C

SP8 RIF8

SP8C RIF8C

Detailed installation instructions are supplied with the rough-in kit.

TROUBLESHOOTING

IF THERE IS NO

SOUND FROM ANY

OF THE SPEAKERS:

• Check that receiver/amplifier

is on and a source is playing.

• Check all wires and connec-

tions between receiver/ampli-

fier and speakers. Make sure

all wires are connected. Make

sure none of the speaker wires

are frayed, cut, punctured or

touching each other.

• Review proper operation of

your receiver/amplifier.

IF THERE IS NO SOUND

COMING FROM ONE

SPEAKER:

• Check the “Balance” control

on your receiver/amplifier.

• Check all wires and connec-

tions between receiver/ampli-

fier and speakers. Make sure

all wires are connected. Make

sure none of the speaker wires

are frayed, cut, punctured or

touching each other.

IF THERE IS LOW (OR

NO) BASS OUTPUT:

• Make sure the connections

to the left and right “Speaker

Inputs” have the correct polar-

ity (+ and –).

• Consider adding a powered

subwoofer to your system.

• In Dolby Digital or DTS modes,

make sure your receiver/

processor is correctly config-

ured. When using a subwoofer,

make sure the subwoofer

output of the receiver/

processor has been enabled.

If no subwoofer is being used,

make sure the left and right

front and rear speakers have

been configured as “LARGE.”

See your receiver/processor’s

owner’s manual for futher

information on correct speaker

configuration in Dolby Digital,

DTS and other surround sound

modes.

IF THE SYSTEM

PLAYS AT LOW

VOLUMES BUT

SHUTS OFF AS VOL-

UME IS INCREASED:

• Check all wires and connec-

tions between receiver/ampli-

fier and speakers. Make sure

all wires are connected. Make

sure none of the speaker wires

are frayed, cut , punctured or

touching each other.

• If more than one pair of main

speakers is being used, check

the minimum-impedance

requirements of your

receiver/amplifier.

Declaration of Conformity

We, Harman Consumer International

2, route de Tours

72500 Chateau-du-Loir

France

declare in own responsibility that the products described in this

owner’s manual are in compliance with technical standards:

EN 61000-6-3:2001

EN 61000-6-1:2001 Gary Mardell

Harman Consumer International

Chateau-du-Loir, France 2/04

SP5 SP6 SP6C SP6CS SP8 SP8C

Frequency Response Frequency Response Frequency Response Frequency Response Frequency Response Frequency Response

45Hz– 20kHz (–10dB) 38Hz – 20kHz (–10dB) 40Hz– 20kHz (–10dB) 40Hz – 20kHz (–10dB) 30Hz – 20kHz (–10dB) 32Hz – 20kHz (–10dB)

Recommended Maximum Recommended Maximum Recommended Maximum Recommended Maximum Recommended Maximum Recommended Maximum

Amplifier Power †Amplifier Power †Amplifier Power †Amplifier Power †Amplifier Power †Amplifier Power †

60 watts 80 watts 80 watts 100 watts total (50WPC) 100 watts 100 watts

Impedance Impedance Impedance Impedance Impedance Impedance

8 ohms nominal 8 ohms nominal 8 ohms nominal 8 ohms nominal per input 8 ohms nominal 8 ohms nominal

Sensitivity Sensitivity Sensitivity Sensitivity Sensitivity Sensitivity

87dB (2.83V/1m) 88dB (2.83V/1m) 88dB (2.83V/1m) 88dB (2.83V/1m), both channels driven 89dB (2.83V/1m) 89dB (2.83V/1m)

Crossover Frequency Crossover Frequency Crossover Frequency Crossover Frequency Crossover Frequency Crossover Frequency

3,000Hz 2,800Hz 2,600Hz 2,600Hz 2,400Hz 2,400Hz

Woofer Woofer Woofer Woofer Woofer Woofer

5-1/4" titanium-laminate 6-1/2" titanium-laminate 6-1/2" titanium-laminate 6-1/2" titanium-laminate 8" titanium-laminate 8" titanium-laminate

cone w/rubber surround cone w/rubber surround cone w/rubber surround cone w/rubber surround cone w/rubber surround cone w/rubber surround

Tweeter Tweeter Tweeter Tweeters Tweeter Tweeter

1"titanium-laminate 1"titanium-laminate 1" Dual 3/4" 1"titanium-laminate 1"titanium-

dome, w/Elliptical Oblate dome, w/Elliptical Oblate titanium-laminate titanium-laminate dome, w/Elliptical Oblate laminate

Spheroidal™ waveguide Spheroidal™ waveguide dome, domes, Spheroidal™ waveguide dome,

and swivel mount and swivel mount w/swivel mount w/swivel mounts and swivel mount w/swivel mount

Plate Size (W x H) Plate Size (W x H) Plate Size (Diameter) Plate Size (Diameter) Plate Size (W x H) Plate Size (Diameter)

7-1/2" x 10" (191mm x 254mm) 8-1/2" x 11" (216mm x 279mm) 9-3/16" (233mm) 9-3/16" (233mm) 10-1/8" x 13-1/8" (257mm x 333mm) 10-7/8" (275mm)

Mounting Cutout Size (W x H) Mounting Cutout Size (W x H) Mounting Cutout Size (Dia.) Mounting Cutout Size (Dia.) Mounting Cutout Size (W x H) Mounting Cutout Size (Dia.)

6-1/8" x 8-11/16" (156mm x 221mm) 7-1/8" x 9-11/16" (181mm x 246mm) 7-7/8" (200mm) 7-7/8" (200mm) 8-7/8" x 11-13/16" (225mm x 300mm)9-1/2" (240mm)

Mounting Depth Mounting Depth Mounting Depth Mounting Depth Mounting Depth Mounting Depth

3-3/4" (95mm) 3-7/8" (98mm) 4-1/4" (108mm) 4-1/4" (108mm) 4" (102mm) 4-1/4" (108mm)

Weight per Speaker Weight per Speaker Weight per Speaker Weight per Speaker Weight per Speaker Weight per Speaker

4 lb (1.8kg) 5 lb (2.3kg) 4.5 lb (2.0kg) 4 lb (1.8kg) 7.8 lb (3.5kg) 5.6 lb (2.5kg)

SPECIFICATIONS

All features and specifications are subject to

change without notice.

†The maximum recommended amplifier power

rating will ensure proper system headroom to

allow for occasional peaks. We do not recom-

mend sustained operation at these maximum

power levels.

*Trademark of Dolby Laboratories.

DTS is a registered trademark of

Digital Theater Systems, Inc.

DESIGN GOAL: Combine the superior performance of traditional

JBL loudspeakers with the convenience of in-wall installation.

TWEETER TYPE:

Titanium-laminate-dome with swivel mount

WOOFER TYPE

Titanium-laminate cone with rubber surround

CROSSOVER NETWORK: Straight-Line Signal Path

™

(SSP)

PROFESSIONAL REFERENCE:Studio Monitor

OWNER’S GUIDE

PRODUCT LINE:

MODELS:

SP5, SP6, SP6C, SP6CS, SP8, SP8C

SOUNDPOINT™SERIES

JBL is a registered trademark of Harman International

Industries, Incorporated.

Part No.

406-000-05033

PRO SOUND

COMES HOME™

JBL Consumer Products

250 Crossways Park Drive, Woodbury, NY 11797

8500 Balboa Boulevard, Northridge, CA 91329

516.255.4JBL (4525) www.jbl.com

NOTE: For new-construction applications, be sure

to purchase the correct rough-in frame kit.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Harman Sprecher Handbücher

Harman

Harman JBL Control X Wireless Bedienungsanleitung

Harman

Harman JBL AUTHENTICS 200 Bedienungsanleitung

Harman

Harman JBL DD65000 Bedienungsanleitung

Harman

Harman JBL PARTYBOX 100 Bedienungsanleitung

Harman

Harman Infinity REF-6532ix Bedienungsanleitung

Harman

Harman Harman Kardon CITATION ONE Bedienungsanleitung

Harman

Harman JBL L82 Classic Bedienungsanleitung

Harman

Harman JBL STAGE Series Bedienungsanleitung

Harman

Harman JBL Link 500 Bedienungsanleitung

Harman

Harman JBL VERTEC VT4888DP-DA Technisches Datenblatt

Harman

Harman JBL BOOMBOX2 Bedienungsanleitung

Harman

Harman JBL Charge 5 Bedienungsanleitung

Harman

Harman JBL DD65000 Bedienungsanleitung

Harman

Harman JBL STADIUM BASSHUB Bedienungsanleitung

Harman

Harman JBL BOOMBOX 2 Bedienungsanleitung

Harman

Harman JBL Professional EON700 Series Bedienungsanleitung

Harman

Harman JBL simply cinema SCS125 Bedienungsanleitung

Harman

Harman JBL CLICK Bedienungsanleitung

Harman

Harman JBL GO2+ Bedienungsanleitung

Harman

Harman JBL PARTYBOX 300 Bedienungsanleitung

Harman

Harman JBL Moto Mods SOUNDBOOST Bedienungsanleitung

Harman

Harman CITATION TOWER Bedienungsanleitung

Harman

Harman JBL Professional GSF3 Bedienungsanleitung

Harman

Harman JBL XTREME3 Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung