Harman REVEL C263 Bedienungsanleitung

C263, C283, C263LP, C283LP

In-Ceiling Architectural

Loudspeaker

Instruction Manual

2In-Ceiling Architectural Loudspeaker

Instruction Manual

ABOUT REVEL®IN-CEILING SPEAKERS

Since the ﬁrst Revel®speakers in 1996, Revel products have stood at

the forefront of loudspeaker design and performance. Revel in-ceiling

loudspeakers draw upon the same research, resources and unique

perspective that put all Revel loudspeakers in a class by themselves.

Revel in-ceiling loudspeakers provide unparalleled value and are known

for their standard-setting low sonic coloration and their freedom from

distortion over an extraordinarily wide dynamic range.

IN-CEILING LOUDSPEAKER HIGHLIGHTS

sLong-throw woofers with rubber surrounds provide high output with

low distortion.

s1-inch (25mm) metal-dome tweeter with an integrated waveguide

provides optimized response both on and off axis.

sHigh-order crossover network delivers accurate timbre reproduction.

sLow-proﬁle (LP) models offer high performance and allow

installation in areas where mounting depth is restricted.

PRODUCT REGISTRATION

Please take a moment to register your product on our Web site at www.

revelspeakers.com. You’ll enable us to keep you posted on our latest

advancements and help us to understand our customers and build

products that meet their needs and expectations.

BOX CONTENTS

Your Revel in-ceiling loudspeaker box should contain the following

items:

1 x Revel in-ceiling loudspeaker

1 x grille

1 x extra scrim cloth for grille

1 x mounting template

1 x instruction manual

UNPACKING THE SPEAKER

Carefully unpack the speaker. If you suspect damage from transit, report

it immediately to your dealer and/or delivery service. Keep the shipping

carton and packing materials for future use.

INSTALLATION CONSIDERATIONS

Your new Revel loudspeakers have been engineered to provide

extremely accurate performance. However, any speaker’s ultimate

performance will be affected by the speaker’splacement in the listening

room and the acoustics of the room. Not all listening spaces can

accommodate the ideal conditions of these two factors. Therefore,

careful attention to the placement of your Revel in-ceiling loudspeakers

will have a signiﬁcant impact on the general performance of the

loudspeakers.

DOCUMENTATION CONVENTIONS

This document contains general safety, installation and operation

instructions for the Revel®C283, C263, C283LP,C263LP in-ceiling

loudspeakers. It is important to read this document before

attempting to use this product. Pay particular attention to:

WARNING: Calls attention to a procedure,

practice, condition or the like that, if not

correctly performed or adhered to, could result

in injury or death.

CAUTION: Calls attention to a procedure, practice,

condition or the like that, if not correctly performed or

adhered to, could result in damage to or destruction of part

of or the entire product.

Note: Calls attention to information that aids in the

installation or operation of the product.

In-Ceiling Architectural Loudspeaker

Instruction Manual

LOUDSPEAKER PLACEMENT FOR DISTRIBUTED

SOUND

sSince distributed sound is general sound throughout an area, place

the loudspeakers as uniformly as possible for even sound coverage

throughout the area.

sPlace the left and right loudspeakers roughly the same distance

from the primary listener locations.

sTo avoid “hot spots” where the sound is too loud, plan to use more

loudspeakers, with each set to play at a lower volume.

LOUDSPEAKER PLACEMENT FOR TWO-CHANNEL

STEREO

Place the left and right loudspeakers the same distance from the

primary listening area (or as close to the same distance as possible). The

distance from each speaker to its nearest side wall should also be the

as close to the same distance as possible.

Boundary

Compensation

HighFrequency

Level

OFF ON

0+–

Boundary

Compensation

HighFrequency

Level

OFF ON

0+–

Equal

Distance

Equal

Distance

RightLeft

Ideally, the distance between the left and right loudspeakers should be

slightly less than their distance from the primary listening area.

LOUDSPEAKER PLACEMENT FOR HOME THEATER

sThe front left, center and front right loudspeakers should be

centered relative to the video display.

sThe front left, center, and front right loudspeakers should be closer

to the video display than to the main listening area. For example,

if the video display is 10 ft (3m) from the main listening area, the

loudspeakers should be 6 ft (1.8m) or further from the main listening

area.

sThe front left and front right loudspeakers should be relatively close

to the sides of the video display. For example, front left and front

right loudspeakers used with a 50-in (1.2m) video display should

generally not be more than 80 in (2m) apart.

sThe center loudspeaker should be aligned with the center of the

video display.

sThe surround-channel loudspeakers should be as far from the main

listening area as possible but at least 2 feet (0.6m) from side and

rear walls.

5.1-Channel Speaker Placement

sIn a 5.1-channel system, the surround left and surround right

loudspeakers should be located directly to the sides of, or up to

10 degrees behind, the main listening area.

Boundary

Compensation

HighFrequency

Level

OFF ON

0+–

Boundary

Compensation

HighFrequency

Level

OFF ON

0+–

Boundary

Compensation

HighFrequency

Level

OFF ON

0+–

Boundary

Compensation

HighFrequency

Level

OFF ON

0+–

Boundary

Compensation

HighFrequency

Level

OFF ON

0+–

Front Left

Surround Left

More than

2' (0.6m)

More than

2' (0.6m)

Surround Right

Approx. 10°

Center Front Right

Video Display

7.1-Channel Speaker Placement

sIn a 7.1-channel system, the surround left and surround right

loudspeakers should be located directly to the sides of, or up to 10

degrees behind, the main listening area.

sIn a 7.1-channel system, the surround back left and surround back

right loudspeakers should be equidistant from the primary listening

area and generally as far from it as possible but at least 2 ft (0.6m)

from the side and rear walls.

Boundary

Compensation

HighFrequency

Level

OFF ON

0+–

Boundary

Compensation

HighFrequency

Level

OFF ON

0+–

Boundary

Compensation

HighFrequency

Level

OFF ON

0+–

Boundary

Compensation

HighFrequency

Level

OFF ON

0+–

Boundary

Compensation

HighFrequency

Level

OFF ON

0+–

Boundary

Compensation

HighFrequency

Level

OFF ON

0+–

Boundary

Compensation

HighFrequency

Level

OFF ON

0+–

Front Left

Surround Left

Surround

Back Left

Surround

Back Right

More than

2' (0.6m)

More than

2' (0.6m)

More than

2' (0.6m)

Surround Right

0°–10°

Center Front Right

Video Display

4In-Ceiling Architectural Loudspeaker

Instruction Manual

INSTALLATION INSTRUCTIONS

CAUTION: Do not use the tweeter-mounting bafﬂe as a handle

to move, carry or position the speaker. Doing so can damage the

bafﬂe. Such damage is not covered by the speaker’s warranty.

Revel architectural speakers are extremely easy to install. However, if

you are unable to understand and follow the instructions in this manual

clearly and fully, or if you are unsure of your ability to install these

loudspeakers properly, please contact your dealer or a qualiﬁed installer.

WARNING: HARMAN International assumes

no responsibility for improper installation of

hardware or for any personal injuries or product

damages resulting from improper installation or

a fallen loudspeaker.

CONNECTINGTO THE AMPLIFIER

CAUTION: REMOVE POWER

You must connect the speaker wires before the speaker is fully

installed. To protect the audio system and yourself from damage

or injury through accidental electrical shorting and surges

during installation, turn all audio system power OFF before

beginning the speaker installation.

Speaker Wire

Use high-quality speaker wire to obtain the best performance from your

Revel in-ceiling speakers.

sFor wire lengths of less than 50 ft (15m), use at least 16-gauge

speaker wire.

sFor wire lengths between 50 ft and 100 ft (15m – 30m), use at least

12-gauge speaker wire.

sFor wire lengths of greater than 100 ft (30m), use at least 10-gauge

speaker wire.

Note: All speaker wires must comply with all local building and

safety codes for use in in-ceiling applications.

Making Connections

Connect each channel’spositive (+) terminal on the back of the ampliﬁer

or receiver to the positive (red) terminal on the corresponding speaker;

connect each channel’snegative (–) terminal on the back of the ampliﬁer

or receiver to the negative (black) terminal on the corresponding

speaker. Do not reverse polarities (that is, do not connect + to –, or – to

+) when making connections. Doing so will cause poor imaging and

diminished bass response.

Negative Terminal

(Black)

Positive Terminal

(Red)

Press down on the terminal tab to open the hole; insert the bare end of

the wire into the hole; and release the tab to secure the wire. NOTE:

C283LP and C263LP models have post-type terminals. Press down on the

post to open the hole; insert the bare end of the wire into the hole and

release the post to secure the wire.

CAUTION: To avoid short circuits that may damage your

equipment, be certain that positive and negative wire strands do

not touch each other and do not touch metal parts such as the

speaker frame.

In-Ceiling Architectural Loudspeaker

Instruction Manual

MOUNTINGTHE SPEAKERS

For New Construction

If you wish to pre-install a rough-in frame for the speakers before the

drywall is installed in new construction, you will need to purchase

the correct rough-in frame kit for your loudspeaker model from your

authorized Revel dealer. Detailed mounting instructions are supplied

with the rough-in kit. After the drywall is installed, follow the

installation instructions in For Existing Construction, below.

For Existing Construction

Note: The installation procedure is the same for all models

covered by this manual.

1. Ensure that the drywall, plywood or other ceiling material is 1/2" –

2" (13mm – 51mm) thick and capable of withstanding the weight of

the speaker being installed.

Make sure to allow at least 3/4" (19mm) between the edge of the

supplied installation template and any rafters or other obstructions

behind the wall, so the speaker’slocking mechanism will have room to

engage fully. Perform an obstruction survey to be sure that there are

no studs, lengths of conduit, pipes, heating ducts or air returns in the

ceiling cavity that will interfere with the speaker.

Mounting

Opening

3/4"

(19mm)

3/4"

(19mm)

3/4"

(19mm)

2. Determine the correct speaker location and use the template included

with the speaker to mark the ceiling material.

3. Cut the ceiling drywall along the mark you made in Step 2 to create

the mounting opening.

4. Connect the speaker to the ampliﬁer as explained in Connecting to the

Ampliﬁer, on page 4.

5. Attach the speaker's seismic tab to a support line, as per local safety

regulations.

Seismic Tab

Support Line

6. Make sure all four speaker clamps are in their “ready-to-mount”

position.

Speaker Clamps in

Ready-to-Mount Position

6In-Ceiling Architectural Loudspeaker

Instruction Manual

7. Insert the speaker straight into the mounting opening. Tighten the

speaker clamp screws on the front of the speaker bafﬂe. The speaker

clamps will automatically rotate into position and begin clamping the

speaker.

s7HENYOUNOTICERESISTANCEONTHESCREWSTHESPEAKERHASBEEN

clamped successfully.

IMPORTANT: Always use low-torque settings. NEVER

over-tighten the clamp screws

Insert Speaker Straight Into

Mounting Cut-Out

Tighten

Clamping Screws

C2 Speaker Clamps Inside

Mounting Cut-Out

8. Attach the supplied grille. Powerful magnets in the speaker frame will

securely hold the grille in place.

Attach Supplied Grille

Painting the Grille

Revel architectural loudspeaker grilles can be painted to match any

décor. If you wish to change the grille’s color,its satin ﬁnish will function

as a primer coat. For the best results follow this procedure:

1. Gently remove the scrim cloth from the back side of the grille before

painting.

2. Use a high-quality spray paint and apply a thin coat of color. Ensure

that the grille perforations remain free of paint. Filling them with

paint will diminish the speaker’ssound quality. If any perforations are

plugged, use compressed air to blow the paint out of the perforations.

Note: If you ﬁnd any grille perforations that are plugged with paint

after the paint has dried, carefully use a straight pin or sewing

needle to remove the paint.

3. We have included replacement scrim cloths. After the paint has dried,

apply a light coat of spray adhesive to the inside of the perforated

grille and attach a new scrim cloth. IMPORTANT:Never spray

adhesive on the cloth. The square scrim cloth has pre-attached foam

pads that help prevent the grille from vibrating against the ceiling.

NOTE: Square grilles are available for Revel C263, C283, C263LP and

C283LP speakers. Contact your authorized Revel dealer for details.

EXCESSIVE OUTPUT LEVELS

Your Revel loudspeakers feature custom-designed transducers and

high-quality network components featuring high-order ﬁlters with steep

cutoffs that reduce the potential of damage to individual speaker drivers

and help the loudspeakers maintain their performance even under

extreme operating conditions. However, all loudspeakers have limits

when it comes to continuous playback. To extend these limits, avoid

playback at volume levels that result in distorted or strained sound.

OBTAINING SERVICE

To obtain service, contact an authorized Revel dealer. Refer to Limited

Warranty, on page 7 for more information.

In-Ceiling Architectural Loudspeaker

Instruction Manual

DIMENSIONS

Mounting Opening Diameter Mounting Depth Overall Dimensions (w/grille)

C283 9-5/8" (244mm) 5-1/8" (130mm) 10-23/32" (272mm) Dia. X 5-5/16" ((135mm)) Deep

C263 8" (203mm) 4-23/32" (120mm) 9-3/32" (231mm) Dia X 4-15/16" (125mm) Deep

C283LP 9-5/8" (244mm) 2-3/4" (70mm) 10-23/32" (272mm) Dia. X 2-31/32" (75mm) Deep

C263LP 8" (203mm) 2-11/16" (69mm) 9-3/32" (231mm) Dia. X 2-15/16" (74mm) Deep

Dimensions are subject to change without notice.

For complete performance speciﬁcations, please go to the Revel Web site: www.revelspeakers.com.

HARMAN International Industries, Incorporated

8500 Balboa Blvd., Northridge, CA 91329

Revel and the Revel logo are trademarks of HARMAN International Industries,

Incorporated, registered in the United States and/or other countries.

Features, speciﬁcations and appearance are subject to change without notice.

For questions, assistance or additional information concerning any of our

products, call us at: (516) 594-0300 or (888) 691-4171.

For technical support, submit your detailed inquiry to:[email protected].

Part No. REVP4908 Rev. A www.revelspeakers.com

LIMITED WARRANTY

Revel Series speakers are warranted against defects. The duration of the speaker’swarranty depends on the laws in the country in which it was

purchased. Your local Revel®retailer can help you determine the length of your warranty.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Harman Sprecher Handbücher

Harman

Harman JBL PULSE5 Bedienungsanleitung

Harman

Harman JBL AUTHENTICS 200 Bedienungsanleitung

Harman

Harman JBL 4312MII Bedienungsanleitung

Harman

Harman Infiniy CLUBZ 150 Bedienungsanleitung

Harman

Harman JBL SB-0204A Bedienungsanleitung

Harman

Harman JBL Professional 3 MkII Series Bedienungsanleitung

Harman

Harman JBL Professional CSS8018 Bedienungsanleitung

Harman

Harman JBL PARTYBOX 710 Bedienungsanleitung

Harman

Harman JBL GO 3 Bedienungsanleitung

Harman

Harman JBL BOOMBOX2 Bedienungsanleitung

Harman

Harman JBL PARTYBOX ON-THE-GO Bedienungsanleitung

Harman

Harman JBL CRUISE Bedienungsanleitung

Harman

Harman REVEL PERFORMA Be4 C426Be Bedienungsanleitung

Harman

Harman JBL PARTYBOX 300 Bedienungsanleitung

Harman

Harman JBL Link 10 Bedienungsanleitung

Harman

Harman Harman/Kardon Enchant 800 Bedienungsanleitung

Harman

Harman JBL NightLife Series Bedienungsanleitung

Harman

Harman JBL PROFESSIONAL VTX A8 Bedienungsanleitung

Harman

Harman JBL XTREME 4 Bedienungsanleitung

Harman

Harman JBL Link 500 Bedienungsanleitung

Harman

Harman JBL ARENA 6IW Bedienungsanleitung

Harman

Harman Axys ABF-260/100W PA6 V0 Low Profile Bedienungsanleitung

Harman

Harman JBL QUANTUM ONE Bedienungsanleitung

Harman

Harman kardon Citation 200 Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung