ENCLOSURE DIMENSIONS (mm)
DIN RAIL MOUNTING
CLAMP DIMENSIONS (mm)
ACCURACY
Power network parameters are measured out y the
most advanced True RMS measuring technology
assuring maximum accuracy and precision (±1% for
loads greater than 4.8W).
Power measurement takes into account all
actual fluctuations of the Mains voltage.
Energy Usage
data is saved into nonvolatile
memo
ry of the module at any 1 kWh and will
e automatically restored in case of power
reaks. After excluding the module from the Z-
network, Energy Usage record will reset to 0.
COMMAND CLASSES
• Basic • Switch Binary • Sensor Multilevel
• Meter • Association Group Information
• Device Reset Locally • Z-Wave Plus Info
• Multi Channel • Configuration
• Manufacturer Specific • Power Level
• Firmware Update • Association • Version
• Multi Channel Association
WARRANTY
We warrant that the device is free from defects in
parts and workmanship under normal use for 24
months from date of purchase. The original
purchase invoice or sales receipt is the proof of
date of purchase y the Customer.
If the Device has manufacturing defects or in any
case of alleged lack of conformity, the Customer
shall send a claim. Once we receive the Warranty
Claim, we must inform the Customer if the
Warranty is applica le and the address where the
Device shall e sent in order to verify the defects
(if any). The Device shall e sent y the Customer
at its own costs and expenses, and with the
original packaging, the supplied accessories and
documents proving date of purchase. We must
then inform the Customer a out the defects and on
its repair or replacement (where applica le). The
Warranty Period of the replaced or repaired Device
shall not e extended. We will ship the repaired or
a replaced Device to Customer freight prepaid. We
will not e lia le for damages to property caused
y faulty device. We will not e lia le for indirect,
incidental, special, consequential or punitive
damages, or for any damage, including, inter alia,
loss of profits, savings, data, loss of enefits,
claims y third parties and any property damage or
personal injuries arising from or related to the use
of the Device. If the Device cannot e replaced
with another of the same type (e.g. the Device is
no longer in production or no longer availa le for
selling in the Customer’s country), it may e
replaced with a different one having similar
technical specifications to the faulty one. Such
replacement shall e considered as a total
fulfillment of our o ligations.
Warranty exclusion:
- Defects caused y normal wear of parts or
especially su ject to wear, such as parts that
require periodic replacement during the normal
operation of the system;
- Splits, cracks, scratches, dents, scratched or
discolored surfaces and parts, reakage of plastic
parts and any other cosmetic damage;
- Damages resulting from use of the system other
than that provided, including ut not limited to the
failure to follow instructions contained in the
operating manual;
- Damages caused y accident, a use, misuse,
dirt, viruses, liquid contact, fire, earthquake,
improper or inadequate maintenance or cali ration,
negligence or other external causes;
- Environmental damage and / or defects caused
y smoke, dust, dirt, soot, or other external
influences;
- Damages caused y modifications and alterations
in the functionality or features;
- Damages resulting from transportation or
inadequate packaging when returning the product
to an authorize service center;
- Damages resulting from surges in the power
and/or telecommunication network, improper
connection to the grid in a manner inconsistent
with the operating manual, or from connecting
other devices not recommended y the maker;
- Damages caused y operating or storing the
device in extremely adverse conditions, i.e. high
humidity, dust, too low (freezing) or too high
am ient temperature;
- Products whose warranty sticker has een
removed, damaged or rendered illegi le;
- Expiration of the Warranty Period.
If a defect is not covered y the Warranty, we will
inform the Customer a out the extra expenses for
the repair or replacement.
TECHNICAL SPECIFICATIONS
10 Independent Relay Outputs
Capa le to control AC and/or DC loads
Wide Power Supply range: 110-240VAC, 50/60Hz
Max. AC output: 10A / 110-230V (resistive load)
Max. DC output: 12A / 12-30VDC
Dura le relays with long life contact system
16A rated PCB power tracks and terminals
Front panel LED indication of active outputs
User configura le Power Up Memory function
User configura le parameters for utton type –
push utton, toggle switch or follower switch
(individual setting for each channel)
True RMS Power meter with 60A current clamp
(included), reporting all power data to the Z-Wave
controller (True RMS Voltage, Frequency, Current,
Instant Active Power, Power Factor and Energy
Usage)
ABS enclosure for standard DIN Rail mounting
Dimensions: 105 x 86 x 57mm
Dura le tactile uttons on the front panel
Conforms to EU regulations: EN55022 EN610006
Radio protocol: Z-Wave Plus, GEN 5, 868.42MHz
Antenna range: up to 50m outdoor / 30m indoor
DISPOSAL GUIDELINES
The product does not contain hazardous chemicals.
Do not dispose of electrical appliances as
unsorted municipal waste, use separate
collection facilities. Contact your local
government for information regarding
the collection systems availa le.
