HASHIMA HN-2880C Bedienungsanleitung

検針機

检针机

ＮＥＥＤＬＥＤＥＴＥＣＴＯＲ

ＨＮ－２８８０Ｃ

ＨＮ－２７９０Ｇ

取扱い説明書

使用说明书

ＩＮＳＴＲＵＣＴＩＯＮＭＡＮＵＡＬ

この度はハシマ製品をご購入頂き、誠に有難うございます。

本機の性能を生かし、安全に使って頂くために、ご使用前にこの取扱い

説明書を必ずお読み下さい。

お読みになった後は、必ず保管して頂き、必要に応じてお読み下さい。

首先，非常感谢贵公司购买我司的产品。

为了更好地了解本机的性能并能

使用说明书

在阅读完后，请妥善保管; 以备必要时阅读使用。

Thank you very much for having bought our products.

Don’t fail to fulfill the matters that demand special attention mentioned

below so that you could put this machine to use for a long time with safety.

Don’t fail to read the user’s manual first of all before use.

Keep this user’s manual with care and read it as occasion demands.

-1-

Prior to use

Please read this manual carefully before using the HN-2880C・HN-2790G

to get the best results and stay safe follow maintenance procedures

and practice good safety.

Keep this user's manual treat it with care and read it as the occasion

demands.

HASHIMA CO. ,LTD.

BUSINESS OFFICE : 7-6, Ryoge Gifu City , Japan

Tel: 81-58-247-8400, 81-58-245-4501 Fax : 81-58-247-3366

SINGAPORE OFFICE : Tel: 65-62858131 Fax: 65-62858132

FACTORY/ KUNSHAN : Tel : 86-512-5777-1838 Fax : 86-512-5777-1848

Ensure the accessories

TestPiece

Spanner（24 ㎜）

PreCheck Bar

-2-

ttentions to be

aid for safet

Don’t fail to fulfill.

You should fulfill following explanations to prevent the user and the others from being hurt

and the properties from being damaged.

■ We classify and explain the degrees of peril and damage to be taken place when you

neglect the contents of the display and the machine erroneously.

DANGER This display tells you the contents that imagine “the imminence danger that

might result in death or a serious injury”.

WARNING

This display tells you the contents that imagine “the possibility of death or a

serious injury”.

CAUTION

This display tells you the contents that imagine “the possibility of resulting in

to be handicapped or material damages exclusively”.

■ We classify and explain the contents you should fulfill in accordance with the following

illustrations. (Following is an example of the illustrations.)

This illustration tells you the contents “that demand attention” you must pay.

This illustration tells you the contents of “prohibition” you should not do at all.

This illustration tells you the contents of “enforcement” you should execute without

fail.

DANGER

Don’t get the children to use alone and don’t use

where the infants can make contact with.

For fear of burn, electric shock

andinjury.

Never remodel at all.

For fear of fire and injury due

to unusual movement

Disassembly prohibited.

Don’t disassemble and repair

absolutely except the repair

technician.

Disassembly

prohibited.

For fear of fire and injury due to

unusual movement. (Contact the

dealers for repair in the case of

damage and troubles.)

Connect with the power source with

ratio consumption suitable

to the machine and don’t fail to

ground.

Unusual heat might

resultinfireorelectric

leak, when

you put machine to use along

with other apparatus.(Contact

the electric construction

work shops nearest by.)

Disconnect the power

source

(the plug and installed

breaker)

out of the origin.

For fear of burn as well as

electric shock and leak that

might result in fire.

WARNING

-3-

WARNING

Don’t fail to disconnect such

power source as the plug and the

setting breaker from the origin,

prior to the maintenance and

inspection.

For fear that the personnel

mightbe hurt due to electric

shock and unusual movement.

Install the machine in

accordance with the

designated way of installation.

For fear of overturning or

falling down resulting in

injury.

Pay sufficient attention to

the conveyors at the time

you inspect the needles.

For fear that some part of

your body and your clothes

would be caught in the machine,

resulting in injuries.

Don’t mount nor put things

on the main unit.

For fear of high temperature

resulting in burn and fire, and

there is a possibility of falling

down to be injured.

Install the machine on the

robust stand or onto the floor

horizontally.

For fear of overturning or

falling down resulting in in

jury.

Don’t put things easy to burn

around the machine.

For fear of causing fire and

so on.

CAUTION

■ Don’t install the machine to the site with high humidity.

(For fear of causing electric leaks.)

■ Don’t bend nor crush the power source cord.

(For fear of electric shock and shortage, resulting in fire.)

■ Don’t get the human being to go nearby except the operators.

PETITION

■ Don’t bring telephone cards, cash cards, wrist watches, cassette tapes, and so on close to

the machine for fear that it might be in trouble, as this is the machine designed to detect the

needles with the help of strong magnetism.

■ Understand well the operation of the switches and so on prior to the manipulation.

-4-

By putting “alarm label” onto every part of the machine, we rouse you to prevent the

user and others from being hurt and proprieties from being damaged.

Ensure the position and contents in regard to the “alarm label” prior to the use.

Never remove nor reform the “alarm label”.

Put a new one as early as possible, when the old “alarm label” is hard to read or

when it is coming off.

【１】

【３】

【２】

In addition, the repair technicians should pay attention to the fact that the “alarm

labels” are put even within the machine.

【3 】

【1 】

【2 】

【3 】

ＣＯＮＴＥＮＴＳ

PRIOR TO USE

ATTENTIONSTOBEPAIDFORSAFETY

INSTRUCTION MANUAL

FEATURES,USEFULNESS,

SPECIFICATIONS,PRECATIONS FOR USE,PRECATIONS FOR INSTALLATION

OPERATINGINSTRUCTIONS

IN REGARD TO NEEDLE DETECTIVE OPERATION

MATTERS THAT DEMAND SPECIAL ATTENTION AT THE TIME OF NEEDLE DETECTION

HOWTOADJUSTTHEBELTPOSITION

INSTRUCTION MANUAL

- 5 -

FEATURES :

○This machine is equipped with the LCD panel for checking the current detecting level．

○Position lamp identifies exact location of Fe materials so that you can find it easily．

○This machine has the “Key Switch” as standard equipment ,and this switch can lock various

settings not to be changed.

○When the device senses the material like the broken needle or setting pin, the buzzer sounds and

stops the belt conveyor .Then the defective products will be returned to your side, which increases

the efficiency．

○The device assures you of the setting of sensibility regulation, which can be finely adjusted by LCD

panel, in accordance with size and kind of the accessories of your garment, enabling a detection of

broken or forgotten needles mixed in the sewn products．

USEFULLNESS :

○The device is to be put to use to inspect Fe needles, broken needles and other Fe pieces remained

in such sewn products as clothes for gentleman, ladies and children, underwear , kimonos, jackets,

bedclothes and others．

- 6 -

SPECIFICATIONS

Model name HN-2880C HN-2790G

Detection method Magnetic induction type

Detection capacity Iron ball Fe0.8 mm or more (120 mm high)

Sensitivity adjustment Decimal (100 steps) and direct reading (6 steps)

Detection width ６００ｍｍ

Detection height 120mm (standard)

Warning device Alarm and position detection

Belt speed ４０～１５ｍ／min.

Power supply Single phase

Power consumption １５０W

Airframe dimensions 2423（L) X 1040 (W) X 903（H)

Machine weight 374kg

Product guider Standard

Precautions for Use

1. Pass a sample of the needle and iron pieces to be detected before use through the machine and

check that the belt stops before starting work.

2. The material that can be detected is limited to steel.

Since stainless steel needles and marking pins cannot be detected, be sure to use iron.

3.For metal sewing accessories such as buttons, slide fasteners, and lock hocks, please designate

those labeled as "Needle detector-compliant" at the stage of design and specifications.

4. The metal objects worn by the operator must be removed because the machine reacts with the

moving metal objects.

Precautions for Installation

1. Install the machine in a horizontal position without vibration.

Secure the body horizontally with the four adjuster bolts on the main unit.

(If it’s not level, the conveyor belt might warp.)

3. Do not install the machine in the vicinity of a steel workbench or shelf.

4. Do not install the machine near the other machine that generates the magnetic field.

Machines using electromagnetic clutch motors, sewing machines, cutting machines,

packing machines, air conditioners, or inverters may cause electric or magnetic disturbance and

cause malfunction.

5. Keep away from large moving metal bodies such as railways and automobiles.

6. Separate as far as possible from the reinforcement or steel frame of the building, and

change the direction of the main body so that it can be installed in a place where no malfunction

occurs.

7. The needle detector generates magnetism.

Please note that the contents may change when magnetic cards such as credit cards are brought

closer.

8. Install the machine in a location within ambient temperature of 10°C to 40°C (non-condensing).

9. A needle detector may not be able to perform properly in a place where the installation

environment is bad.

Select the appropriate location by performing an environmental level test.

- 7 -

Operating instructions

Set the date and time first.

１．Turn on the power breaker.

The system on the LCD panel starts and the HOME screen opens.

２．Year, month, day, hour, minute, and second are displayed at the top of the screen.

３．At least , year, month, day, hour, and minute should be adjusted to local time as precisely as

possible.

４．If not, touch MENU key.

HOME SCREEN Date MENU Key

Power breaker

LCD Panel

Start/Stop Switch

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HASHIMA Sicherheitssensor Handbücher

HASHIMA

HASHIMA HW-40 Bedienungsanleitung

Beliebte Sicherheitssensor Handbücher anderer Marken

THORLABS

THORLABS PDA10JT Bedienungsanleitung

Waeco

Waeco UV-DETECT Bedienungsanleitung

Intermatic

Intermatic IOS-DSIMF Bedienungsanleitung

urmet domus

urmet domus 1083 Bedienungsanleitung

Siemens

Siemens AZL66 Series Bedienungsanleitung

BTI

BTI Profiline Multi Finder Bedienungsanleitung

Challenger

Challenger SL01 Bedienungsanleitung

DMP Electronics

DMP Electronics 1122INT Bedienungsanleitung

Rielta

Rielta Ladoga MK-RK Bedienungsanleitung

Mirion Technologies

Mirion Technologies ACCURAD PRD Bedienungsanleitung

Bosch

Bosch DS835 Bedienungsanleitung

DBI SALA

DBI SALA EZ Stop Bedienerhandbuch

Lamptime

Lamptime ST05C Bedienungsanleitung

Ubiquiti

Ubiquiti MFI-MSC Bedienungsanleitung

Subsite

Subsite 910R Montageanleitung

Satel

Satel OPAL Pro Bedienungsanleitung

Aleph

Aleph XC-1XTEU Bedienungsanleitung

Pima

Pima LARIS QUAD Bedienungsanleitung