A/V Cable Set
Add an additional audio/video input to certain model WinTV-PVRs
The A/V Cable Set can be used to add an additional audio/video input to many of the
WinTV-PVR boards. Normally, WinTV-PVRs come with one A/V input on their back
panel. On many WinTV-PVRs, there is an A/V header which is designed to add an
additional audio/video input (you need to check your board to see if it has the white A/V
header). Once connected, you can then connect two audio/video inputs to your WinTV-
PVR. The switching of the sources from one input to the other can be done with the
WinTV2000 application or via the WinTV Select program.
Designed to fit in a PCI slot, the A/V Cable Set contains the RCA jacks and an S-Video
jack for audio and video, plus a 6" cable to connect to the A/V header on the WinTV-
PVR board. There are jumpers on the A/V Cable Set board, which allow it to support the
WinTV-PVR-150, the WinTV-PVR-250, the WinTV-PVR-350 and the WinTV-PVR-
500.
Please check your WinTV-PVR board to make sure it has a white A/V header.
Here is a picture of the A/V Cable Set installed with a WinTV PVR150MCE:
1
