Haverland ASPEN Bedienungsanleitung

Instruction Manual

ASPEN

Model no.:

HT10PD, HT15PD, HT20PD

EAN 8423055007336 / 8423055007343 / 8423055007350

The device which you just have purchased passed several tests and control in order to

ensure its quality.

It is conceived to bring you an optimal comfort, without any maintenance.

Thank you for choosing us and your trust.

1. SAFETY INSTRUCTIONS

- Means for disconnection must be incorporated in

the fixing wiring in according with the wiring rules.

- A means of disconnection from the power supply

having a contact opening distance of all poles must

be included in the fixed wiring in accordance with

the installation requirements.

- WARNINGS ： In order to avoid

overheating, do not cover the heater.

- The device must not be exposed to water drops or

splash.

- The unit must not be exposed to dripping or

splashing water.

- The appliance must not be used in damp rooms

(bathroom in the volume 0 and 1).

- The device must not be used outdoors.

- The device should not be removed to avoid the

risk of electric shock.

- The device is only intended for domestic use.

- Do not apply pressure to the front of the unit or on

the sides or on top.

- If the power cord is damaged, it must be replaced

by the manufacturer, its service agent or similarly

qualified persons in order to avoid a hazard.

- The heater must be installed so that switches and

other control devices can not be touched by a

person in the bath or shower.

- This appliance can be used by children aged from

8 years and above and persons with reduced

physical, sensory or mental capabilities or lack of

experience and knowledge if they have been given

supervision or instruction concerning use of the

appliance in a safe way and understand the hazards

involved. Children shall not play with the appliance.

Cleaning and user maintenance shall not be made

by children without supervision.

- Children of less than 3 years should be kept away

unless continuously supervised.

- Children aged from 3 years and less than 8 years

shall only switch on/off the appliance provided that it

has been placed or installed in its intended normal

operating position and they have been given

supervision or instruction concerning use of the

appliance in a safe way and understand the hazards

involved.

- Children aged from 3 years and less than 8 years

shall not plug in, regulate and clean the appliance or

perform user maintenance.

- CAUTION — Some parts of this product can

become very hot and cause burns.

- Particular attention has to be given where children

and vulnerable people are present.

- Keep the device at a minimum safety distance of

one meter from any inflammable material (curtains,

furniture…)

- Keep the device away from a gas cooker, a gas

oven, flames, or any inflammable liquids.

- Clean the device with a slightly humid towel after

you switched off the circuit breaker which supplies

the device.

- Do not use any chemical solvent nor abrasive

products to clean the surface of the device at the

risk of scratching, damaging, or even distorting it.

- The heater must not be located immediately below

a socket outlet.

- WARNING: The heater must not be used if the

glass panels are damaged.

- Regarding the instructions for the heater intended

to be fixed by screws on the method of fixing,

thanks to refer to the section “INSTALLATION ” of

the manual.

- WARNING: In order to avoid a hazard for very

young children, this appliance should be installed so

that the lowest heated rail is at least 600 mm above

the floor.

INSTALLATION

PLEASE READ CAREFULLY BEFORE ANY ACTIONS

- Do not put the device just below a plug.

- Do not put the device in a humid room or near a

watering-place.

- Do not use outdoors.

- Do not put the device in an air current that would

disturb its regulation.

- Do not put the device near an obstacle that would

restrict the flowing of the air around it.

- Fix vertically the device on the wall as described

below:

- Choose screws and wall plugs which suit the

material of the wall, and the weight of the device.

INSTALLATION IN THE BATHROOM

Warning: this product shall be used in the volume 2

only

according to the national wiring rules (For France

NF C

15-100)

Note: The drawing is for reference only.

We suggest that you to contact a professional

electrician for assistance.

ELECTRICAL CONNECTION

CAUTION: Before working, turn off the electricity at

the main circuit breaker.

- The installation must be carried out in the rules of

the art and meet the standards in force in the

country (NF C 15-100 in France).

- The unit must be connected to a standard wall box

placed at least 25 cm from the floor.

- The appliance must not be connected to an outlet

with a power plug.

- The appliance must be supplied through a residual

current device (RCD) having a rated residual

operating current not exceeding 30 mA.

- The appliance must not be connected to the earth

wire (yellow and green wire).

ELECTRICAL CONNECTION

Blue or light gray wire connect to Neutral (230V)

Brown or red wire connect to Phase (230V)

Black wire connect to pilot wire. (Optional function to

use in case of control by pilot wire box)

WARNING! (Do not connect the black wire to the

ground).

- In the absence of pilot wire, insulate the bare end

of the black wire to prevent electrical contact with

the other wires or ground.

FIXINGS

To hang the heater on the wall:

1. Choose a suitable installation location for the

heater. (Figure 1)

2. Disassemble the wall bracket by loosening the

screw (do not remove, only loosen) and slide the

metal plate out of the hole. Take out the bracket by

pulling down (Figure 2).

3. Verify that the bracket is horizontal with a spirit

level and mark the location of 4 holes on the wall.

Drill 4 holes in the wall using a drill adapted to

the diameter of wall plug. Insert the wall plug into

the holes,then screw securely wall mount bracket

onto the wall. (Figure 3)

4. Place the heater against bracket (Figure 4):

A : Align the heater on the 2 lower hooks that are

downwards.

B : Pull the heater upwards whilst retaining it in the

2 lower hooks.

C : Align the heater on the 2 upper hooks that are

upwards.

D : Pull the heater down.

5. Slide the metal plate into the hole, and fasten the

screw to lock the wall mount bracket (Figure 5).

LCD display: 

Symbol

Function

Mode standby (the appliance doesn’t work but with power on)

Mode anti-freeze (the appliance maintains the temperature around 7°C)

Mode comfort (set the desired temperature)

Mode eco (ECO maintains the temperature that is 3.5 ° C lower to comfort

temperature. This mode reduces the temperature without disturbing the

desired temperature in comfort mode)

Mode pilote (choose modes via pilote control)

Window detector mode



Child lock

Heating indicator (When appliance is heating up, this icon will show on the

screen. The icon will disappear when detected temperature reach the set

Temperature (centigrades) 

Weekly program setting:

Mode Comfort active

Mode eco active

Standby

CONTROL PANEL





HOW TO USE

1.Setting the time and turning on the device

After connection to the power supply:

Press to toggle between hours / minutes / day of the week (1-7). Press the button

to set the hours / minutes / day of the week. Press the button to complete the

setting and return to standby mode, otherwise after 10 seconds without action the unit will

automatically return to standby mode.

If the device is in operation (changing the time setting):

Press both and buttons at the same time and enter the time setting. Press

to toggle between hours / minutes / day of the week (1-7). Press the button to set the

hours / minutes / day of the week. Press any button other than or to save the

setting, otherwise after 10 seconds without action the setting is automatically saved.

After setting the clock, the standby mode is activated.

2. Touch M

Press M button to toggle among the modes: Comfort mode , Economic mode , Antifreeze

mode , P1/P2/P3/P.

temperature.)

Button

Function

Standby

PRG

Personalized programs



Window detector function

Comfort mode

Economic mode

Anti-freeze mode

P1/P2/P3/P

In Pilot mode P, set the heating using the external timer. When the external programmer is set

to another mode, the display shows:

Pre-installed programs P1/P2/P3:

3. Touch PRG

Press the PRG button to choose one of the programs.

In PRG mode, Press PRG button to select between “day (1 for Monday -7 for Sunday)” and

“heating mode of different periods (00:00-24:00)”.

Select the desired day (1-7) by pressing / buttons.

Press the PRG button to set the "heating mode of different period (00:00-24:00)"

Press button to choose hours, and to choose among function: comfort , economic .

After30 seconds it will automatically finish.

For example: to select the day 1, temperature of 23℃, comfort mode for 24 hours:

External Mode Setting

Icon Displayed

Comfort mode

Comfort mode -1

Comfort mode -2

Economic mode

Antifreeze mode

Standby mode

P 1

Mon-Sun

P 2

day workables

weekends

P 3

day workables

weekends

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Haverland Heizung Handbücher

Haverland

Haverland RCTT Handbuch

Haverland

Haverland RC 6 E Kurzanleitung

Haverland

Haverland RCTT Handbuch

Haverland

Haverland RCB Benjamin Handbuch

Haverland

Haverland ECOVIEW Stücklistenhandbuch

Haverland

Haverland OSYRIS Series Bedienungsanleitung

Haverland

Haverland ECORADi Series Stücklistenhandbuch

Haverland

Haverland SIMPLY-4 Stücklistenhandbuch

Haverland

Haverland RCB Handbuch

Haverland

Haverland ECODRY-GPS Betriebsanleitung

Haverland

Haverland RCTT Handbuch

Haverland

Haverland RC4TT Betriebsanleitung

Haverland

Haverland RC11BL Handbuch

Haverland

Haverland TE-700I Bedienungsanleitung

Haverland

Haverland RCWave+ Stücklistenhandbuch

Haverland

Haverland ECO-DRY GPS Series Stücklistenhandbuch

Haverland

Haverland TOD Series Stücklistenhandbuch

Haverland

Haverland HERCULES Bedienungsanleitung

Haverland

Haverland HAT Stücklistenhandbuch

Haverland

Haverland ePOINT Stücklistenhandbuch

Haverland

Haverland NYA-S series Bedienungsanleitung

Haverland

Haverland RC 4 A Handbuch

Haverland

Haverland HERCULES Betriebsanleitung

Haverland

Haverland RCTTConnect Stücklistenhandbuch

Beliebte Heizung Handbücher anderer Marken

oventrop

oventrop Regucor Series Bedienungsanleitung

Blaze King

Blaze King CLARITY CL2118.IPI.1 Bedienungsanleitung

ELMEKO

ELMEKO ML 150 Bedienungsanleitung

BN Thermic

BN Thermic 830T Bedienungsanleitung

KING

KING K Series Leitfaden

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Kurzanleitung

Well Straler

Well Straler RC-16B Bedienungsanleitung

EUROM

EUROM 333299 Bedienungsanleitung

Heylo

Heylo K 170 Bedienungsanleitung

Eterna

Eterna TR70W Bedienungsanleitung

Clarke

Clarke GRH15 Bedienungsanleitung

Empire Heating Systems

Empire Heating Systems WCC65 Bedienungsanleitung

Wetekom

Wetekom 92 86 43 Bedienungsanleitung

Desa

Desa SPC170-F Bedienungsanleitung

Watlow

Watlow Watrod Electric Tubular Heaters Bedienungsanleitung

Stelpro

Stelpro ASILVC2060 Series Bedienungsanleitung

iLO

iLO IHP2424 Betriebsanleitung

SUNWIND

SUNWIND ZSG101 Bedienungsanleitung