Hawking HWC54DA Bedienungsanleitung

HWC54DAHawking Technologies, Inc. P 0

HWC54DAHawking Technologies, Inc. P 1

HWC54DAHawking Technologies, Inc. P 2

HWC54DAHawking Technologies, Inc. P 3

HWC54DAHawking Technologies, Inc. P 4

HWC54DAHawking Technologies, Inc. P 5

1) INSERTING THE PC CARD

(a) After you have completed the Utility Installation, carefully insert your Hi-Gain

Wireless-G PC Card into an available PC Card slot on your laptop.

(b) Insert the card firmly into the PC Card slot to ensure a proper connection is

made.

Note:Usecautionwhen raisingthe antennaupright. Do NOT over-extend the antenna past

a 90 degree angle. You may rotate the antenna 180 degrees in a counter clockwise or

clockwise position.

-If You Have a Previously Installed Airport Card

(a) If you have an Airport card installed on your

computer you will need to turn it off to use the

Hawking Wireless PC Card. To do this, select the

Airport Icon on the top right corner of your screen

and select “TURN OFF AIRPORT”

HWC54DAHawking Technologies, Inc. P 6

2) System Preferences andNetwork Settings

(a) Click the APPLE icon on the top left corner of your

desktop and open the SYSTEM PREFERENCES menu.

(b) If this is your first time using the Wireless PC

Card on your computer, you will need to enable

the device before using the Wireless Utility. In

the System Preferences page, locate the

NETWORK icon and double click it to access the

control panel.

detected. Click “OK” to continue.

(d) Click “APPLY NOW” to confirm the

selection.

-If you plan on using a “Static” (Manually

entered) IP address for your computer you may

do so here by double clicking the “PCI Ethernet

Slot PC Card Port 1” selection and selecting

TCP/IP.

-If you are using an automatically assigned IP

address (MOST NETWORKS) you do not have

to worry about this. Simply close the window

to proceed.

HWC54DAHawking Technologies, Inc. P 7

3) USING THE HAWKING WIRELESS UTILITY

Each time you insert the Hawking Hi-Gain card the Hawking Wireless

Utility should automatically load. In the case that it doesn’t you may

manually load the Utility by using “FINDER” to view your

“APPLICATIONS” folder and selecting the Hawking Wireless Utility

Icon displayed on the left.

The Configuration Utility is categorized into 6 Tabs. For this QIG, we will

concentrate only on the SITE SURVEY and LINK STATUS tab. If you wish to find out

more about the Utility, please view the Users Manual for detailed instructions.

The SITE SURVEY tab will give you information regarding the wireless networks within

your vicinity.

1) Click on Rescan to update the

list of wireless networks in your

area.

2) Once the list of wireless

networks appear, highlight your

desired network and double-click to

Connect to the network. You

should now be successfully

connected to your network.

Note: If your scan provides no wireless networks, double check to see if your wireless

network is set up correctly. If the problem persists, check with your wireless AP/Router

manufacturer’s technical support department.

HWC54DAHawking Technologies, Inc. P 8

4) READING THE LINK STATUS PAGE AND OBTAINING THE

STRONGEST SIGNAL

The Link Status page gives you information

regarding your current wireless channel,

transmit rate (speed) and link/signal quality.

You will use this utility to figure out which

antenna position results in the best

performance and connection.

1) First you must determine where the location of your Wireless Access Point is within your

network.

2) Position the directional antenna towards the location of the Access Point.

3) While viewing your Link Status utility, rotate the antenna clockwise and counter-clockwise

slowly to figure out which position gives you the highest Link Quality and Signal Strength.

Once you have determined which position gives you the best signal, leave the antenna in

that orientation.

4) When you are not using the Hi-Gain CardBus Card, fold down the antenna to its original

closed position to avoid damage when travelling.

HWC54DAHawking Technologies, Inc. P 9

5) ENABLING WIRELESS SECURITY

If your current wireless network is using wireless security you will first have to figure out whether

your network uses WEP or WPA. You can ask your system administrator if you do not know

which standard you are using. Fore more detailed information on how to configure security please

see the User’s Manual.

To enable the WEP or WPA in the Hawking Wireless Utility you do it two ways. The first is to

simply do a SITE SURVEY and connect to the network. The Utility will prompt you to enter the

security key to access the network.

The second method is to create a Profile which allows you to save the security key used by your

network so when you connect in the future you will not have to enter the key again.

To create a PROFILE select the Profile tab on the top left of the Wireless Utility. Click Add to

create a profile.

a) Enter a Profile name in the highlighted

field to the right. This will help you

easily recognize the profile for future

use.

b) Enter the exact SSID of the specific

network you are creating a Profile for.

c) Select Authentication and Security

to set the security key.

d) Select the correct Authentication type

used by your network. The Hawking

Wireless Utility supports both WEP and

WPA Wireless Security.

e) Enter your specific network key into the

spaces provided. Click OK when you

have completed entering the

information. Select OK one more time

on the Profile page to save the profile.

Andere Handbücher für HWC54DA

Inhaltsverzeichnis

Andere Hawking Computerhardware Handbücher

Hawking

Hawking CardBus 10/100 Fast Ethernet PC Card Bedienungsanleitung

Hawking

Hawking WE110P Bedienungsanleitung

Hawking

Hawking PN652TX Bedienungsanleitung

Hawking

Hawking WIRELESS-G CARDBUS PC CARD - GUIDE D Bedienungsanleitung

Hawking

Hawking HWC54DA Bedienungsanleitung

Hawking

Hawking WE110P Bedienungsanleitung

Hawking

Hawking WE120P Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

Intel

Intel NUC 12 Pro Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung

Advantech

Advantech ASMB-935 Series Bedienungsanleitung

Jupiter

Jupiter RAM PACK Bedienungsanleitung