Hawking HKS104 Bedienungsanleitung

FCC Warning

This equipment has been tested and found to

comply with the regulations for a Class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference when the

equipment is operated in a commercial

environment. This equipment generates, uses, and

can radiate radio frequency energy and, if not

installed and used in accordance with this user’s

guide, may cause harmful interference to radio

communications. Operation of this equipment in a

residential area is likely to cause harmful

interference, in which case the user will be required

to correct the interference at his/her own expense.

CE Mark Warning

This is a Class B product. In a domestic

environment, this product may cause radio

interference, in which case the user may be

required to take adequate measures.

VCCI Mark Warning

LIMITED WARRANTY

Hawking Technology guarantees that every

HKS104 4-port KVM Switch is free from physical

defects in material and workmanship under normal

use for two (2) years from the date of purchase. If

the product proves defective during this two-year

warranty period, call Hawking Customer Service in

order to obtain a Return Authorization number.

Warranty is for repair or replacement only.

Hawking Technology does not issue any refunds.

BE SURE TO HAVE YOUR PROOF OF

PURCHASE. RETURN REQUESTS CANNOT BE

PROCESSED WITHOUT PROOF OF PURCHASE.

When returning a product, mark the Return

Authorization number clearly on the outside of the

package and include your original proof of

purchase.

IN NO EVENT SHALL HAWKING TECHNOLOGY’S

LIABILTY EXCEED THE PRICE PAID FOR THE

PRODUCT FROM DIRECT, INDIRECT, SPECIAL,

INCIDENTAL OR CONSEQUENTIAL DAMAGES

RESULTING FROM THE USE OF THE PRODUCT,

ITS ACCOMPANYING SOFTWARE OR ITS

DOCUMENTATION. Hawking Technology makes

no warranty or representation, expressed, implied

or statutory, with respect to its products or the

contents or use of this documentation and all

accompanying software, and specifically disclaims

its quality, performance, merchantability, or fitness

for any particular purpose. Hawking Technology

reserves the right to revise or update its products,

software, or documentation without obligation to

notify any individual or entity. Please direct all

inquiries to: [email protected].

All brand names and trademarks are the registered property of

their respective owners.

Introduction

With the Hawking HKS104, there is no better way

to save time and money. The HKS104 KVM Switch

is a 4-port PS/2 type KVM Switch that provides

compact and integrated all-in-one KVM connectors

on the Switch side. It enables users to access,

control, boot and reboot multiple computers using

only one keyboard, monitor, and mouse.

Furthermore, the 3-in-1 KVM cable is tailor-made to

integrate keyboard, monitor, and mouse interfaces

all into one connector, thus saving a lot of

unnecessary time and effort. The HKS104 is an

excellent tool for the management of 4 computers

on either SOHO or corporate desktop, making it an

ideal SOHO solution. It also eliminates the

inconvenience and unnecessary effort involved in

constantly moving around from one PC to another.

Package Contents:

♦

One HKS104 4-port KVM Switch

Two Sets of 3-in-1 KVM cables

One Quick Installation Guide

Check to make sure that the unit was not damaged

during shipping. If you encounter a problem,

contact your dealer.

Please read this manual thoroughly, and follow the

installation and operation procedures carefully to

prevent any damage to the HKS104 unit, and/or

any of the devices connected to it.

- 1 -

Pre-installation:

Note: The default setting for the HKS104 4-port

KVM Switch works with most systems. In fact, you

do not have to configure anything before

installation. It is a plug and play device: First,

connect the shared keyboard, video, and mouse to

your KVM Switch and then connect PCs to your

KVM Switch using the 3-in-1 KVM cable. Then,

boot up your PCs one by one, and you can start to

operate the KVM Switch immediately!

For a quick start on installation and operation,

please follow the instructions below.

The correct setup sequence is:

(1) Connect the shared keyboard, mouse and

monitor to the KVM Switch and then

connect the KVM Switch to the computers

using the slim 3-in-1 KVM cable (with

integrated all-in-one connector on Switch

side).

(2) Power up your connected computers one by

one. Since the KVM Switch receives power

from the computer’s PS/2 interface, it is

powered up when you connect the KVM

cables to a PC.

- 2 -

To set up your HKS104, please follow the steps

below:

Before connecting any cable to your KVM Switch,

please make sure all of your computers and their

peripherals have been powered off. Otherwise, the KVM

Switch might not be set up properly.

Step 1 - Make sure all the computers that are to be

connected to the KVM Switch and their

peripherals are in the powered-off state. If

not, turn the power off before you proceed

with the following steps.

Step 2 - Connect the shared keyboard, monitor and

mouse to the corresponding connectors on

the rear of your KVM switch.

Step 3 - Connect each of your computers to the

KVM Switch using the 3-in-1 KVM cable.

You can use individual standard keyboard,

mouse and video cables for extension.

Depending on the cable you use, the

maximum cable distance is limited to 5 ~ 7

meters (15.5 ~23 feet).

Note the HKS104 is powered through the PS/2

interface; therefore, the Switch is automatically

powered on when it connected.

Step 4 – Now, power up the connected computers,

and the keyboard and mouse should be

recognized. Now you can begin operating

the KVM switch.

- 3 -

DO NOT TRY to connect the KVM Switch to the

computers while the computers are still in powered-on

states. Otherwise, the computer will have difficulty

recognizing your shared keyboard and mouse.

- 4 -

Easy Operation

There are two methods to select a specific

computer: using the push button or ahotkey

sequence.

Push buttons

The push buttons let you have direct control over

KVM switch operation and channel switching.

Simply press the button to switch to a specific

channel. See Quick Reference Sheet

Keyboard hotkeys

A keyboard hotkey sequence consists of three

specific keystrokes: See Quick Reference Sheet

Hotkey sequence = ScrLk + ScrLk + Command key

Keystrokes of a hotkey sequence should follow

one another within 2 seconds. Otherwise, the hotkey

sequence will not be validated.

For detailed Hotkey sequences and their

corresponding functional commands, please refer

to the Quick Reference Sheet.

- 5 -

HKS104 4-Port KVM Switch

Keyboard Hotkeys/ Push Buttons Operation

Command Set

Command Hotkey Push

Button Description

Select a PC

ScrLk +

(x)1

(channel

no.)

Press

button x

for

channel

Select the active

channel

Next lower

channel

ScrLk +

Ĺ(arrow

up)

Select the next

lower connected

channel

Next higher

channel

ScrLk +

Ļ(arrow

down)

Select the next

higher connected

channel

Autoscan

Beep Sound

On/Off

ScrLk +

Toggle on/off the

beep sound for

switching

confirmation while

autoscanning

Reset KVM

ScrLk +

End

Reset the KVM

Switch for switch

system reboot.

Autoscan

ScrLk +

Autoscan through

every connected

channel for quick

screen browsing of

each channel.

Stop

Autoscan

Any key

keyboar

-- Terminate

Autoscan activity

Notes: The (x) denotes a number key for the selected

port number (x= 1 ~ 4).

- 6 -

Andere Handbücher für HKS104

Inhaltsverzeichnis

Andere Hawking Schalten Handbücher

Hawking

Hawking HKS112AU Bedienungsanleitung

Hawking

Hawking HS2G24T Bedienungsanleitung

Hawking

Hawking CS164 Bedienungsanleitung

Hawking

Hawking UH114 Bedienungsanleitung

Hawking

Hawking UH104 Bedienungsanleitung

Hawking

Hawking HKS102 Bedienungsanleitung

Hawking

Hawking FX200ES Bedienungsanleitung

Hawking

Hawking HFS5T Bedienungsanleitung

Hawking

Hawking HFS16T Bedienungsanleitung

Hawking

Hawking GS108T Bedienungsanleitung

Hawking

Hawking CS112U Bedienungsanleitung

Hawking

Hawking CS112U Bedienungsanleitung

Hawking

Hawking PN108ES Bedienungsanleitung

Hawking

Hawking CS112U Bedienungsanleitung

Hawking

Hawking CS112U Bedienungsanleitung

Hawking

Hawking FX826ES Bedienungsanleitung

Hawking

Hawking HKS102 Bedienungsanleitung

Hawking

Hawking GS400T Bedienungsanleitung

Hawking

Hawking UH214 Bedienungsanleitung

Hawking

Hawking PN1616ES Bedienungsanleitung

Hawking

Hawking HFS8T Bedienungsanleitung

Hawking

Hawking H-GS5T Bedienungsanleitung

Hawking

Hawking PN500TPA Bedienungsanleitung

Hawking

Hawking GS224T Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch