Hawksmoor CS4100A-5 Bedienungsanleitung
SKU: 75716
41cc Petrol Chainsaw
WHAT'S IN THE BOX
If you do not have all these items, please contact:
www.coreservice.co.uk
Hotline: +44 01904 947568
Email [email protected]
Chain saw x 1
Bar cover x 1
Fuel bottle x 1
Hex key x 1
Screw driver x 1
Socket wrench/ slotted
screw drive x 1
Oregon chain x 1
Oregon bar x 1
Brake cover x 1
Original User’s Instructions
PLEASE KEEP THESE INSTRUCTIONS FOR FURTHER REFERENCE
2
SPECIFICATION
Technical Data
Model CS4100A-5
Engine displacement 41cm3
Engine 1.4kW
Cutting length 37.5cm
Chain gauge (0.050˝), 1.27mm
Idling speed 3100±300/min
Maximum speed with cutting equipment 11000/min
Maximum chain speed 21m/s
Fuel tank capacity 260ml
Oil tank capacity 210ml
Anti-vibration function Yes
Chain wheel teeth 6 Teeth * 9.525mm
Chain brake Yes
Clutch Yes
Automatic chain lubrication Yes
Net weight without chain and chain bar 4.5kg
Fuel consumption (specific) 702g /kWh
LpA sound pressure level 99 dB(A) K=3 dB(A)
LWA sound power level 114 dB(A)
Vibration ahv (front handle) max. 6.5 m/s2K=1.5 m/s2
Vibration ahv (rear handle) max. 6 m/s2K=1.5 m/s2
Spark plug L8RTF
Guide bar Oregon 160SDEA041
Saw chain Oregon 91P057X
The sound intensity level for the operator may exceed 80 dB(A) and ear protection measures are
necessary. The declared vibration value has been measured in accordance with a standard test
method and may be used for comparing one product with another. The declared vibration value may
also be used in a preliminary assessment of exposure.
WARNING! This tool may cause Hand-Arm Vibration Syndrome (HAVS) if its use is not
adequately monitored and managed.
Preventative measures include, among others, regular maintenance and care of the product
and cutting attachments, keeping hands warm and periodical breaks, as well as proper
planning of work processes.
3
EXPLANATIONS AND SYMBOLS, CAUTIONS AND WARNINGS
INTENDED USE
This machine may only be used outdoors for cutting wood and in combination with the original
cutting chains. This machine is not designed for heavy-duty or commercial use. Any use of the
machine that deviates from its intended use, and is not included in these instructions, is considered
unauthorised use and relieves the manufacturer from his or her legal liability.
WARNINGS SYMBOLS
Before any use, refer to the corresponding paragraph in the manual.
This symbol, before a safety comment, indicates a precaution, a warning or a danger.
Ignoring this warning can lead to an accident for yourself or for others. To limit the
risk of injury, fire, or electrocution, always apply the recommendations indicated.
Conforms to European Standards.
The exhaust gas is poisonous and asphyxiating. If inhaled, it may even be lethal. Do
not operate the engine
in closed or poorly-ventilated places.
Petrol and petrol vapours are extremely flammable.
DO NOT touch to prevent burns.
Wear hearing protection and eye protection (PPE) when using the device.
Wear dust protection.
4
Wear robust footwear when using the device.
Wear protective gloves when using the device.
114
Guaranteed sound power level data (114dB), in accordance with Directive 2000/14/
EC.
Beware of kickback (recoil).
Avoid contact with the tip of the guide bar (chain return point). This will result in
kickback of the chainsaw.
DO NOT hold the saw with one hand.
Hold the saw frmly with both hands. Place your right hand on the rear handle and
your left hand on the front handle.
DO NOT start or use the equipment close to people (especially children) or animals.
During operation, it is recommended that a minimum distance of 10 metres from other
people is maintained.
A product placed on the United Kingdom market meets the UKCA Marking
requirements.
5
HEALTH AND SAFETY
GENERAL SAFETY WARNINGS
Safety Warnings
WARNING! Read all safety warnings and instructions.
Failure to follow the warnings and instructions may result
in electric shock, fire and/or serious injury.
WARNING! Read all safety warnings and instructions
designated by the symbol.
Save all warnings and instructions for future reference.
• Always ensure anyone intending to operate this chainsaw is fully
conversant with the contents of this assembly manual prior to
assembling, maintaining or operating the chainsaw.
• Perform assembly operations as described in this manual.
Failure to observe this warning may lead to serious injury, death,
or damage to the chainsaw.
• Always take care when removing the packaging, to prevent
damage to you or to the chainsaw.
IMPORTANT! Before assembling the chainsaw, check all the parts
indicated in the manual are in the box. Inspect all the parts for
signs of damage. Do not assemble the chainsaw if you observe any
damaged components.
GENERAL SAFETY
• The chain is designed exclusively for sawing wood.
You may only fell trees if you have received the appropriate
training. The manufacturer cannot be held liable for damage
caused by improper or incorrect usage. PLEASE NOTE: Our
6
equipment has not been designed for use in commercial, trade
or industrial applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial businesses or
for the equivalent purposes.
PREPARATION
• DO NOT operate a chainsaw with one hand! Serious injury to the
operator, helpers, or bystanders may result from one-handed
operation. A chainsaw is intended for two-handed use only.
• DO NOT use the saw if you are tired, ill or under the influence of
alcohol and/or drugs, or medication.
• Use safety footwear, snug-fitting clothing, and protective gloves,
as well as eye, hearing and head protection devices (PPE).
• Use caution when handling fuel. Move the chainsaw at least 10
feet (3m) away from the fuelling point before starting the engine.
• DO NOT allow other persons to be near when starting or cutting
with the chainsaw. Keep bystanders and animals away from the
work area.
• DO NOT start cutting until you have a clear work area, secure
footing, and a planned retreat path from falling trees or
branches.
OPERATION
• Keep all parts of your body away from the saw’s chain when the
engine is running.
• Before you start the engine, make sure that the chain is not in
contact with anything.
• Carry the chainsaw with the engine stopped, the chain bar and
saw chain facing rearwards, and with the exhaust away from
your body.
• NEVER use a chainsaw which is damaged, incorrectly set,
incomplete or loosely assembled. Make sure that the chain
7
rotation stops when the chain brake is applied.
• Shut off the engine before setting the chainsaw down.
• Use extreme caution when cutting small bushes and saplings;
slender material may catch in the saw chain and be whipped
towards you or pull you off balance.
• When cutting a limb that is under tension, be alert for spring
back so that you will not be struck when the tension in the wood
fibres are released.
• Keep the handles dry, clean, and free of oil or fuel mixture.
• Operate the chainsaw only in well-ventilated areas.
• DO NOT operate a chainsaw from up in a tree unless you have
been specifcally trained to do so.
• All chainsaw servicing, other than the items listed in the
user manual safety and maintenance instructions, should be
performed by competent chainsaw service personnel.
• When transporting your chainsaw, use the appropriate chain bar
cover.
• DO NOT operate your chainsaw near or around flammable
liquids or gases, whether inside or outdoors. An explosion and/
or fire may result.
• DO NOT fill the fuel tank, oil reservoir or lubricate whilst the
engine of the chainsaw is running.
• USE THE CORRECT TOOL: Cut wood ONLY. Do not use
the chainsaw for purposes for which it was not intended. For
example, do not use the chainsaw for cutting plastic, masonry
or building materials.
• The engine will create toxic exhaust fumes as soon as the
engine is started. Never work in enclosed areas or in areas with
poor ventilation.
• NOTE: The chainsaw is designed for noncommercial, occasional
use and for general work, such as stump grubbing, and cutting
firewood, etc.
8
It is not designed for lengthy use. If it is used for a lengthy
period, the vibrations it causes in the hands of the user may
result in circulation problems (white finger syndrome).
• The chain is designed exclusively for sawing wood.
You may only fell trees if you have received the appropriate
training. The manufacturer cannot be held liable for damage
caused by improper or incorrect usage.
• PLEASE NOTE: Our equipment has not been designed for use in
commercial, trade or industrial applications. Our warranty will be
voided if the machine is used in commercial, trade or industrial
businesses or for the equivalent purposes.
KICKBACK
Kickback may occur when the nose or tip of the chain bar touches
an object, or when the wood closes in and pinches the saw chain
in the cut. If the bar tip contacts, it may cause an extremely fast
reverse reaction, kicking the chain bar up and back towards the
operator.
Pinching the saw chain along the top of the chain bar may push
the chain bar rapidly back towards the operator. Either of these
reactions may cause you to lose control of the saw, which could
result in serious personal injury. Do not rely exclusively upon the
safety devices built into your saw. As a chainsaw user, you should
take several steps to keep your cutting jobs free from accident or
injury.
•NOTE: With a basic understanding of kickback, you can reduce
or eliminate the element of surprise.
Sudden, unexpected action contributes to accidents.
• Keep a good firm grip on the saw with both hands: the right
hand on the rear handle, and the left hand on the front handle,
when the engine is running. Use a firm grip with thumbs and
fngers encircling the chainsaw handles. A firm grip will help you
reduce kickback and maintain control of the saw. Never let go of
9
the chainsaw when it is running.
• Make sure that the area in which you are cutting is free from
obstructions. Do not let the nose of the chain bar contact a log,
branch, or any other obstruction which could be hit while you
are operating the saw.
• Cut at high engine speeds.
• DO NOT overreach or cut above shoulder height.
• Follow the manufacturer’s sharpening and maintenance
instructions for the saw chain.
• Only use replacement bars and chains specifed by the
manufacturer or the exact equivalent.
• PINCHING the saw chain along the BOTTOM of the cutting
(chain) bar may PULL the saw forward away from the operator.
• PINCHING the saw chain along the TOP of the cutting (chain)
bar may PUSH the chain bar rapidly back towards the operator.
• Any of these reactions may cause you to lose control of the saw,
which could result in serious personal injury.
Beware of the following: Rotary recoil.
A = Recoil direction. B = Recoil reaction
zone. Impact/jamming recoil and pulling
reactions: When cutting from under an
object (see Pic. D) using the top of the
chain, the object may pinch the chain
and cause either a forward force on the
chainsaw or a rearward force on the
object (see Pic. C).
When cutting from the top surface of an
object (Pic. E) using the bottom of the
chain, the object may pinch the chain
and cause either a rearward force on
the chainsaw or a forward force on the
object.
A B
A A
C
D
E
10
MAINTENANCE AND STORAGE
• Keep all nuts, bolts and screws tight, to be sure the equipment
is in safe working condition.
• Never store the equipment with petrol in the tank inside a
building where fumes can reach an open flame or spark.
• Allow the engine to cool before storing in any enclosure.
• To reduce the fire hazard, keep the engine, silencer and petrol
storage area free of hedge trimmings, leaves, or excessive
grease.
• Replace worn or damaged parts for safety.
• If the fuel tank has to be drained, this should be done outdoors.
NOTE: Dispose of soiled maintenance material and operating
materials at the appropriate collection point.
Recycle packaging material, metal and plastics. Do not dispose of
with domestic, household waste.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Hawksmoor Kettensäge Handbücher
