Haws 3177FR Leitfaden

03/20 Model 3177FR Page 1 of 4

1455 Kleppe Lane Sparks, NV 89431-6467 (775) 359-4712 Fax (775) 359-7424

E-mail: [email protected]  website: www.hawsco.com

No. 0002077325 (13)

Model 3177FR

Drinking Fountain

INSTALLATION, OPERATION

MAINTENANCE INSTRUCTIONS

LIMITED WARRANTY

HAWS warrants that this specific product is guaranteed against defective material or

poor workmanship for a period of one year from date of shipment. HAWS liability

under this warranty shall be discharged by furnishing without charge F.O.B. HAWS

Factory any goods, or part thereof, which shall appear to the Company upon

inspection to be of defective material or not of first class workmanship, provided that

claim is made in writing to Haws within a reasonable period after receipt of the

product. Where claims for defects are made, the defective part or parts shall be

delivered to the Company, prepaid, for inspection. HAWS will not be liable for the

cost of repairs, alterations or replacements, or for any expense connected therewith

made by the owner or his agents, except upon written authority from HAWS,

Sparks, Nevada. HAWS will not be liable for any damages caused by defective

materials or poor workmanship, except for replacements, as provided above. Buyer

agrees that HAWS shall not be liable for general, special, or consequential damages

claimed to arise under the contract of sale. The drinking fountain manufactured by

HAWS is warranted to function if installation and maintenance instructions provided

are adhered to. The units also must be used for the purpose for which they were

intended.

NO OTHER WARRANTIES EXPRESSED OR IMPLIED ARE AUTHORIZED,

PROVIDED OR GIVEN BY HAWS.

NOTE TO INSTALLER: Please leave this information with the Maintenance Department.

SHOULD YOU EXPERIENCE DIFFICULTY WITH THE INSTALLATION OF THIS

MODEL PLEASE CALL:

TECHNICAL SUPPORT: 1-800-766-5612

FOR CUSTOMER SERVICE: 1-888-640-4297

03/20 Model 3177FR Page 2 of 4

RECOMMENDED TOOLS: Hack saw, pipe joint sealant, screwdriver, level, 12" adjustable

wrench, 10" pipe wrench, 5/64“ hex key wrench, 9/16”, 1/2", 7/16” socket wrench or open end

wrench.

LOCATION OF UNIT: The Model 3177FR Drinking Fountain is a wheelchair accessible

drinking water facility. The height dimensions shown, meet current ADA requirements. When

installing this unit, local, state or federal codes should be adhered to. If height other than

shown is required, then dimensions must be adjusted accordingly.

SUPPLY LINE: The minimum recommended line size is 1/2“IPS. Flowing pressure is 30-90

psi (2-6 ATM) for Model 3177FR. Where sediment or mineral content is a problem, an inlet

filter is recommended.

PLUMBING CONNECTIONS: Inlet at freeze valve is 1/2” IPS (male). Waste outlet is 1-1/2”

O.D. tailpiece.

MAINTENANCE: Periodically clean the strainer. Refer to 6518FR Operation and

Maintenance Sheet for additional information.

TROUBLESHOOTING 3177FR with 6518FR

PROBLEM

REPAIR CHECKLIST

Insufficient bubbler flow.

1a.

Check that inlet screwdriver stop valve is

wide open. (Customer supplied). Turn

counterclockwise.

Verify minimum 30 PSI flowing supply

pressure.

Clean inlet strainer.

Adjust valve to increase flow. See 6518FR

Valve Manual.

General Notes:

Before tightening nut and ferrule assembly, push tubing into fitting until it bottoms out to

ensure correct engagement with O-Ring.

For more information about Haws products, see our website: www.hawsco.com

HAWS® and other trademarks usedin these materials are the exclusive property of Haws Corporation.

6VALVE BOX

ACCESS PLATE

PUSH BUTTON ASSY

4BUBBLER HEAD

STRAINER ASSY

BOTTOM PLATE

2VALVE, FREEZE RESISTANT

SPACER

0005365345

PA3177

5881PBA

5703M

6461

PBM3177

6518FR

PARTS BREAKDOWN

APPROVED

DRAWN

PART NUMBER

SCALE: SHEET OF

REVISION

DRAWING TYPE: SIZE: A

BYECN NO.

PAGE

DATE

ECN:

REVISED PER

CHKD

HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.

MODEL(S)

1455 KLEPPE LANE

SPARKS, NEVADA 89431

(775) 359-4712 FAX (775) 359-7424

E-MAIL: HAWS@HAWSCO.COM

WEBSITE: WWW.HAWSCO.COM

ITEM DESCRIPTION

THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS

MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.

WHEN ORDERING PARTS PLEASE SPECIFY MODEL NUMBER.

PART NO.

D. OLLOM

11/25/95

0002077325

3177FR

1:1

04/02/20

3 OF 4

PARTS BREAKDOWN

5527

2020

REMOVE INSERT

WITH 5/16 HEX SOCKET

(NOT SUPPLIED)

DETAIL A

ROTATED 90° INTO VIEW

DETAIL OF ITEM 3

(NOT SUPPLIED)

ENSURE TUBE IS DISCONNECTED FROM

"PUSH-IN" TYPE CONNECTOR ON PRESSURE

REGULATOR PRIOR TO REMOVAL. APPLY A

DROP OF LOCTITE 222MS ON NOZZLE THREADS

PRIOR TO REASSEMBLING BACK ONTO BUBBLER

HEAD. REATTACH TUBE TO "PUSH-IN" TYPE

CONNECTOR ENSURING IT IS FULLY BOTTOMED

OUT.

1NOTE:

** REQUIRED - SOLD SEPARATELY

FROST LINE (NOT SUPPLIED).

MAIN SEWER LINE LOCATED BELOW

MINIMUM TO A POROUS GRAVEL FILL OR

[1829mm]. WASTE TO BE 1 1/2" IPS

BURY DEPTHS OF 48"[1219mm] AND 72"

CONCRETE ANCHORS

152mm

127mm

RECESS

3.2mm

MOUNTING DETAIL

VALVE BOX

GROUND LEVEL

870mm

34.25"

813mm

32"

(SUPPLIED)

MOUNTING BOLTS

4X 1/2-13 UNC

12-1/2"

318mm

241mm

9-1/2"

MOUNTING PLATE

MTG BOLTS

CONCRETE BASE

(NOT SUPPLIED)

RECESSED

5/8"

16mm

4X 1/8"

457mm

ACCESS

PLATES

18"

686mm

27"

686mm

27"

914mm

36"

330mm

13"

356mm

292mm

11-1/2"

14"

30" [762] SQUARE

1/2"-13 UNC

NOTES:

1. -REMOVED-

SPACER

1 1/2" OD

TAILPIECE

(SUPPLIED,

CUT TO FIT)

2 SPACER IS GLUED TO WALL OF PEDESTAL, BUT MAY

BE KNOCKED OFF DURING WASTE ARM ASSEMBLY

REMOVAL/REPAIR. ENSURE THAT SPACER IS REPLACED

TO KEEP HOSE AND WASTE ARM ALIGNED PROPERLY.

BUBBLER HEAD

DISCONNECT

COUPLING TO

REPLACE

APPROVED:

DRAWN:

PART NUMBER

SCALE: SHEET OF

REVISION

DRAWING TYPE: SIZE: A

BY:ECN NO.

PAGE

DATE:

ECN:

REVISED PER

CHK'D.:

MODEL(S)

1455 KLEPPE LANE

SPARKS, NEVADA 89431

(775) 359-4712 FAX (775) 359-7424

E-MAIL: HAWS@HAWSCO.COM

WEBSITE: WWW.HAWSCO.COM

THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS

MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.

12/01/95

0002077325.D

3177FR

1:1

04/02/20

4 OF 4

INSTALLATION

5527

2020

6518FR VALVE ASSY

(NOT SUPPLIED)

REQUIRED - SOLD SEPARATELY

Andere Handbücher für 3177FR

Beliebte Freiluftbrunnen Handbücher anderer Marken

Sunnydaze Decor

Sunnydaze Decor XSS-578 Bedienungsanleitung

Campania International

Campania International Bibendum FT-400 Bedienungsanleitung

Elkay

Elkay FLEXI-GUARD EFHA8 1M Series Installationshandbuch

S.R.Smith

S.R.Smith Color Light Stream 2CLSLBK Bedienungsanleitung

Hozelock Cyprio

Hozelock Cyprio Cascade 1500 Bedienungsanleitung

Campania International

Campania International Juliet Fountain Bedienungsanleitung

YARDART

YARDART FT-155 Bedienungsanleitung

Alpine

Alpine WIN732 Bedienungsanleitung

Campania

Campania Valencia Bedienungsanleitung

Campania International

Campania International FT-320 Bedienungsanleitung

GardenWize

GardenWize SWGSL230 Bedienungsanleitung

Kelkay

Kelkay Easy Fountain Rustic Windmill Bedienungsanleitung

Alpine

Alpine WIN258 Bedienungsanleitung

Bond

Bond Signature Series Bedienungsanleitung

Kenroy Home

Kenroy Home 51112COPBL Installationsanleitung

EasyPro

EasyPro Tranquil Décor HBB39 Bedienungsanleitung

Angelo Decor

Angelo Decor Castillo Bedienungsanleitung

Campania International

Campania International Girona FT-102A Bedienungsanleitung