HD DVB-S2 Bedienungsanleitung

=======================

DVB-S2 High Definition

Set Top Box

=======================

SAFETY PRECAUTION

CAUTION:

The lightning flash with arrowhead Warning: The exclamation point within an

symbol, within an equilateral triangle, To reduce the risk of electric shock, equilateral triangle is intended to

is intended to alert the user to don't open the cabinet. Refer alert the user to important operating

"dangerous voltage" and to prevent servicing to qualified personnel only. and maintenance (servicing).

from a risk of electric shock.

WARNING: Do not use this STB where contact with or immersion in water is a possibility.

Do not use near flower vase, washbowls, kitchen sinks, laundry tubs, swimming pools, etc.

WARNING: Do not put the candle or lamp stand on the cabinet; otherwise, there is the danger of fire.

WARNING: The unit should be connected to a power supply only of the type described in the operating

instructions or as marked on the unit. If you are not sure of the type of power supply (for example, 120 or

230 V) to your home, consult your local dealer or local power company.

WARNING: This product installs diodes. Do not open the cabinet or touch any parts in the inner

mechanism. Consult your local dealer for technical service if the opening is required.

Unit Cleaning: After the unit power is turned off, you can clean the cabinet, panel and remote control

With a soft cloth lightly moistened with a mild detergent solution.

Attachments: Never add any attachments and/or equipment without the manufacturer consent; as such

additions may result in the risk of fire, electric shock, or other personal injury.

Locating: Slots and openings in the cabinet are provided for ventilation to protect it from overheating. Do not

block these openings or allow them to be blocked by placing the STB on a bed, sofa, or other similar surface,

nor should it be placed over a radiator or heat register.

Power-Cord Protection: Place the power-supply cord out of the way, where it will not be walked on. Please

take special attentions to cords at plugs, convenience receptacles, and the pointwhere they exit from the unit.

Object and Liquid Entry: Never put objects of any kind into this STB through openings, as they may

Touch dangerous voltage points or short-out parts that could result in a fire or electric shock.

Never spill any liquid on the STB.

Note: Moisture may be formed on the lens In the following conditions:

 when the unit suddenly move from a cold environment or an aircondition room to a warm place.

 immediately after a heater has been turned on.

 in a steamy or very humid room.

If the moisture forms inside the unit, it may not operate properly. To correct this problem, turn on the

power and wait about two hours for the moisture to evaporate.

Parts Replacement: When the unit parts need to be replaced, user should make sure the service technician

use the replacement parts specified by the manufacturer or having the same characteristics as the original

part. Unauthorized replacement may put the unit In the risk of fire, electric shock or other hazards.

Safety Check: After all the maintenances and repairs are done, user is required to request the service

technician to conduct the overall safety check to ensure the machine is In the proper condition.

Note: To ensure proper use of this product, please read this User manual carefully and

retain for further reference.

SPEC

Accessories Main board (DB-M3602-02V01), 48 Keys IR controller, USB HDD BOX(customer option)

Board configuration 396MHz MIPS CPU, 128MB DDR400 RAM, Memory Clock 198Mhz, 4MB Serial

Flash, Single Tuner, DVB-S2 demodulator,

Power Supply Input 100V ~ 240V 50/60Hz

Power Consumption 30W Max / 1W Standby (it’s optional by customer’s board)

RS232 For FW Upgrading.

Standard Receiver

Standard DVB-S2 Standard (ETSI EN 302 307)

Input Frequency Range 950MHz ~ 2150Mhz

Input Signal Level -25dBm ~ -65dBm

Demodulation QPSK, 8PSK, 16APSK

Transport Stream MPEG-2 ISO/IEC 13818 Transport Stream Specification

MPEG Profile Level MPEG2 SD, MPEG2 HD, H.264/AVC SD, H.264/AVC HD

LNB Power & Polarisation Vertical +13.5V, Horizontal 18V, Current: MAX 500ma,

Multi Satellite receiving 22K switcher, DiSEqC1.0, DiSEqC1.1, Unicable , DiSEqC1.2, USAL

Conditional Access system 1 Common Interface Slots ; 1 CA card reader Slots

A/V Output ports YPrPb, RCA with CVBS, SCART with CVBS, HDMI(HDCP), Left/Right analog audio

output(RCA), Digital audio output(SPDIF with coaxial or fiber)

Aspect Ratio Auto, 16:9 Pillar box, 4:3 Pan & Scan, 4:3 Letter Box.

Audio Decoding MPEG1 layer I, MPEG1 layer II, MPEG1 layer III, MPEG2, AC3.

Audio Mode Stereo/MONO/Left/Right

DVR supporting DVR with USB HDD, Time shifting with USB HDD

USB2.0 High Speed HOST 1 USB2.0 Port, USB media player to playback the media in USB flash disk or USB

HDD or USB card reader with memory card or FW Upgrading.

File system FAT12, FAT16, FAT32, NTFS (only support first partition)

Media Supporting JPG, BMP, MP3, WMA

Ethernet Interface 10/100Mbit

Storage Temperature 0℃to +50℃

Front Panel

Bottom Name Function

STAND BY Stand by Switch standby/play mode

MENU Main Menu Enter into main menu

OK OK confirm

-VOL Volume - Volume down

+VOL Volume + Volume up

-CH Channel - Channel down

+CH Channel + Channel up

Rear Panel

Bottom Name Function

POWER Power swicth On/off

ETHERNET ETHERNET RJ-45(to ethernet)

RS-232 RS-232 Connect to a PC fro SW upgrade

HDMI HDMI port HDMI 1.3output

PVR USB port Connect to usb

CVBS CVBS Connect TV through RCA

AUDIOR/L AUDIOR/L Connect to audio R/L to TV/ Audio

LNB IN LNB IN Connect to satellite antenna

LNB OUT LNB OUT Connect to the other receiver

CONTENTS

QuickStart............................................................................................................................................................................................................7

RemoteController..................................................................................................................................................................................9

BasicOperations.........................................................................................................................................................................................12

1.Edit Channel.....................................................................................................................................................................................12

1.1TV Channel List.................................................................................................................................................................................12

1.2Radio Channel List...........................................................................................................................................................................14

1.3Favorite......................................................................................................................................................................................................14

1.4Delete All.................................................................................................................................................................................................14

2.Installation............................................................................................................................................................................................15

2.1Antenna Antenna&satellite Quick Setting...................................................................................................................15

2.2SatelliteList............................................................................................................................................................................................15

2.3Antenna Setup.....................................................................................................................................................................................16

2.4Single Satellite Scan.......................................................................................................................................................................17

2.5MultiSatellite Scan...........................................................................................................................................................................17

2.6Transponder L ist................................................................................................................................................................................17

2.7LNB PowerSetting............................................................................................................................................................................18

3.System Setting.................................................................................................................................................................................19

3.1Language...................................................................................................................................................................................................19

3.2TV system ...............................................................................................................................................................................................19

3.3Display Setting......................................................................................................................................................................................19

3.4Local Time Setting.............................................................................................................................................................................20

3.5Timer Setting..........................................................................................................................................................................................20

3.6Parental Lock..........................................................................................................................................................................................20

3.7OSD Setting.............................................................................................................................................................................................20

4.Tools....................................................................................................................................................................................................................21

4.1Information...............................................................................................................................................................................................21

4.2Factory Default.....................................................................................................................................................................................21

4.3Common Interface..............................................................................................................................................................................21

4.4CA Slot Setting......................................................................................................................................................................................22

4.5Upgrade By USB.................................................................................................................................................................................22

4.6Dump By USB.......................................................................................................................................................................................22

4.7Remove USB Device Safely.......................................................................................................................................................23

5.Media.................................................................................................................................................................................................................23

5.1HDD Information.................................................................................................................................................................................23

5.2PVR Setting..............................................................................................................................................................................................23

5.3Media Player.............................................................................................................................................................................................23

6.NetworkSetup...................................................................................................................................................................................25

6.1Network Setup........................................................................................................................................................................................26

6.2Cccam Client Setup.............................................................................................................................................................................26

6.3MGCamd Plug Setup.........................................................................................................................................................................27

6.4Twin Protocol Setup............................................................................................................................................................................28

6.5Newcamd Sever Setup........................................................................................................................................................ ..............28

Quick Start

Turn on STB

Connect the STB’s main power and turn on the power switch.

When the first time turn on the STB there’s no channels in the system. So the STB will enter into mainmenu directly.

1. If user connect STB with TV by A/V cable the TV will show”no OSD, pls press V. Format” when the first time you turn on the

STB. Pls press “V. Format” button of the remote then the STB will enter into mainmenu.

2. If user connect STB with TV by HDMI cable, the STB will enter into mainmenu directly.

Q&A

Q1:The power the STB was turned on and not in standby mode, but there’s nothing showed on the TV screen.

A1: Make sure the TV set has benn set to the correct video input(not the TV channels). For example, if you have connected the

unit with the video1 input of the TV set, the TV set has to be switched to Video 1.

Q2.The power of my STB has been turn on and not in standby mode, but the TV screen showed nothing except”No

signal”.

A2:That means the channel, which you select, is no signal. It could be several causes:

1 .The channel which you select is not in your allocate satellite. The simply solution is to change channel.

2 .The signal of current Tv channel is too weak. You can try to change channel to other strong signal channels. If the problems

still exist, please consult your local dealer or other professionals for technical service.

3 .You use the Dual LNB and you need modify LNB type.

Channel scan

1 .In Main menu we can see “Installation”. Press UP/DOWN to move the highlight to “Installation” and then press OK to enter into

Installation menu. In Installation menu pls choose to enter Satellite List.

MENU-Installation-Satellite List

2 .In satellite list user need to select satellite according to their needs.

3 .After user chose satellite, we need to go back to Installation menu and then choose Antenna Setup.

4 .User need to set exact parameters of the antenna he/she chose.

5 .After user set the parameters, we need to goback to Installation menu and choose Sigle/Multi Sat.Search.

If user only selected one satelltethen pls select Single Satellite Search and select auto scan to search programs. If user

selected more than one satellite in the satellite list then pls select Multi satellite search and auto scan to search programs.(for Multi

satellite search, user need to set DiSEqC/USALS in Antenna setup first)

the above picture shows the steps of Multi saellite searh

Record

In recording mode, there will show a window on the screen. Like below pic. Shows.

In recording mode, user can press RECORD again to set Duation.

In playing mode, press RECORD can record the current playing show. After user press RECORD there will show a symbol on

the right side of the screen, llike “REC”.

*The recorded file will save to U-disk directly. So before we start to record, user need to connect a U-disc with the STB. user

cann’t apply the record function if no U-disk found by the STB.

In recording mode, there will show a window on the screen. Like the above pic. Shows.

User can find some informations of the recording program, the name, date, time...and how long the program has been recorded.

User can pause or stop recording the program according to their own needs.

When press PAUSE, the STB will pause recording. User can press PLAY to go on recording or press STOP to stop recording

and exit from Record. When exit from recording the STB will ask user “Are you sure to exit recording?”. Here user need to choose

YSE or NO according to their own need.

When press STOP, the STB will stop recording.There will show a dialogue, asking user”whether to save the recorded file.” User

need to choose YSE or NO according to their own need.

Q&A

Q1: Why my record files cann’t not be saved?

A 1 : The recorded program can only be saved when it’s recorded for more than 2 minutes.

Q2 : How long can a program been record?

A 2 : It depends on the storage of user’s U-disk.

Q 3:The record files will be saved in what format?

A 3: All record files will be saved as *.ts.

RemoteController

Power

Switch the STB between standby and play mode.

AUDIO

In full screen, press AUDIO there will show a window of

“Audio”.

User can modify the audio track by press UP/DOWN and

press LEFT/RIGHT to change the audio mode ( Left/ Right/

Stereo/ Mono ).

V.FORMAT

In full screen, press V.FORMAT one time can check the

current video output resolution.

Press V.FORMAT continuously, the system will switch the

Video output resolution.( 576P -> 480P 576i -> 480i ->

720P_50 -> 720P_60->1080i_50 -> 1080i_60)

TV/RADIO

Press TV/RADIO to switch between TVandRADIO playing.

MUTE

In play mode, press MUTE one time to mute the sound.

Press again to restore the sound.

TV/STB

Switch between TV mode and RADIO mode.

FIND

In full screen, press FIND can open the “Find” window.

User can press Left/Right/Up/Down to move hightlight to

choose the letter and press OK to input the selected letter into

the dialogue. The searching result will display on the right of

this window. When enter the letters user can press Red color

key to elete the char, Blue color key to confirm and Green color

key or EXIT to cancel and exit from FIND window.

PG-/PG+

In Channel list, press PG-/PG+ can page up/down the

channel list.

In full screen, press PG-/PG+ can switch satellite directly.

FAN/FAV

In full screen, press FAN/FAV then there will show a

window of “Favorite Group” on the left of the screen.

User can move highlight to choose favorite group by press

UP/DOWN and press OK to check the channels in the chose

group. In the chose group user can press UP/DOWN to choose

the channel he/she want then press OK to switch to the chose

channel.

*If user didn’t add/set any favorite channel, there will no

channles available in each group.)

User can go to Chapter1. Edit Channel-TV Channel

list-FAV to check how to add the Favorite channel.

DVR INFO

In full screen, press DVR INFO can check current program’s

informations.

EXIT

Press EXIT to exit from present window / menu / dialogue.

Inhaltsverzeichnis

Beliebte Set-Top-Box Handbücher anderer Marken

VBrick

VBrick 8000-0188 Bedienungsanleitung

Kogan

Kogan KGNPVR500VAA Bedienungsanleitung

Asus

Asus O!PLAY MEDIA PRO Bedienungsanleitung

Samsung

Samsung ICU 100 Bedienungsanleitung

VECTORMAX

VECTORMAX A12E Bedienungsanleitung

DStv

DStv Explora Bedienungsanleitung

Ace Digital TV

Ace Digital TV ADB 3800 Bedienungsanleitung

Cisco

Cisco 4398DVB Bedienungsanleitung

Polaroid

Polaroid KHA-01651B Bedienungsanleitung

Samsung

Samsung GX-SM530CF Bedienungsanleitung

BT Business Total Broadband Bedienungsanleitung

Megasat

Megasat HD 720 plus Bedienungsanleitung

Sungale

Sungale STB608 Bedienungsanleitung

Amino

Amino Amigo 7X Bedienungsanleitung

Geniatech

Geniatech ATV225 Bedienungsanleitung

Android

Android Androidminibox mx2 se Bedienungsanleitung

Hama

Hama Internet TV Box Bedienungsanleitung

Ariva

Ariva T650i Bedienungsanleitung