Health O Meter PROPLUS 1100KL Bedienungsanleitung

Model 1100KL

Digital Handrail Scale

User Instructions

P/N UM1100KL Rev 3-080613

Model 1100KL

Thank you for your purchase of this Health o meter® Professional product. Please read this

manual carefully, and keep it for easy reference or training.

TABLE OF CONTENTS

Caution and Warning.................................................................................................3

Specifications for This Scale.....................................................................................4

Certifications / Connectivity / Disposal ......................................................................5

Assembly Instructions 1100KL Scale .......................................................................6

Setup / Batteries .......................................................................................................12

Quick Start Instructions.............................................................................................14

Maintenance..............................................................................................................18

Calibration.................................................................................................................19

Troubleshooting ........................................................................................................20

Warranty....................................................................................................................21

Note: This scale has been factory calibrated, and does not

require calibration prior to use.

Please register your scale for warranty coverage at:

http://www.homscales.com/customer/registration.aspx

For User Instructions updates and revisions, please go to:

http://www.homscales.com

CAUTION AND WARNING

To prevent injury and damage to your scale, please follow these instructions very

carefully.

Assemble and operate the scale per the enclosed user instructions.

Operate this scale exclusively with the AC adapter provided by Health o

meter® Professional. Use of an unspecified adapter will void the warranty,

and can pose a serious safety hazard.

Prior to using this scale, inspect theAC adapter cord for cracking /

fraying, or for broken / bent plug prongs.

Prior to using this scale, ensure that theAC adapter is plugged into an

outlet with the rated voltage appropriate for operation.

Ensure that the AC adapter outlet is wired to a circuit breaker or other

protected power source.

Unplug the AC adapter, and carefully store both the adapter and adapter

cord before moving the scale.

Ensure that the AC adapter and scale do not come in contact with liquids,

excessive temperature, or excessive humidity.

Operating this scale at voltages and frequencies other than specified can

damage the equipment and will void the warranty.

Do not transport the scale with any weight on the platform.

Do not exceed recommended weight limit of 1000 lb / 454 kg for this

scale.

For accurate weighing, this scale must be placed on a flat, stable surface.

For accurate weighing, verify before each use the proper operation

according to the procedure described in this manual.

Do not use in the presence of flammable or explosive materials.

For accurate weighing, if the “Lo bAtt” indicator activates, replace the

batteries or switch to the AC adapter as soon as possible.

When replacing / inserting batteries, be sure to use all new batteries.

To prevent patient injury, the patient must be attended throughout the

entire weighing event.

If the scale is being connected to another medical device, the power

adapter must not be used. Disconnect the power adapter from the scale

and use only the battery power.

SPECIFICATIONS FOR THIS SCALE

General

The Model 1100KL digital handrail scale uses highly sophisticated microprocessor technology.

Each precision scale is designed to provide accurate, reliable and repeatable weight

measurements. In addition, each scale is designed to provide the user with features that make

the weighing process simple, fast, and convenient.

This scale is set up to use motion-sensing weighing technology in order to determine the actual

weight of a moving patient.

Weight can be displayed in pounds or in kilograms. The scale features built-in handrails for

patient comfort and safety. It also has a 180° swivel display head for privacy and easy operator

reading from either side of the scale. This scale has 2 wheels built-in for easy mobility. This

scale can be powered using an AC adapter (included), or by 6-AA batteries (not

included).

1100KL Scale Specifications

Capacity and Resolution 1000 lb x 0.2 lb (454 kg x 0.1 kg)

Power Requirements 110 - 240VAC, 50-60Hz - 9V DC adapter or 6 - AA batteries

Environmental Operating temperatures: 50°F to 95°F (10°C to 35°C)

Storage temperatures: 30°F to 125°F (0°C to 50°C)

Maximum Humidity: 85% RH

Physical Dimensions Platform

Length: 18” (46 cm)

Width: 22” (56 cm)

Height: 2-1/2” (6 cm)

Assembled Size and Weight

Length: 29-1/4” (74 cm)

Width: 31” (78.7 cm)

Height: 49-1/2” (126 cm)

Weight: 53 lb (24 kg)

CERTIFICATIONS / CONNECTIVITY / DISPOSAL

Certification Descriptions

Pelstar, LLC has been officially certified as the manufacturer

of Health o meter®Professional medical devices. The Pelstar,

LLC quality assurance system covers the development,

production, sales and service of medical scales and

measuring systems.

This product is tested to and meets the requirements of:

1. UL60601-1 First Edition: Safety for Medical Electrical

Equipment

2. CSA C22.2 No. 601-1 M90: Medical Electrical Equipment

1100KL Scale Connectivity Information

To enable reliable transmission of weight, height, and Body Mass Index (BMI) data, this scale is

designed to connect to a computer, monitor, or other electronic device via a built-in USB port.

This connectivity helps minimize a source of potential medical errors caused by incorrectly

copying and then recording patient data.

This scale is EMR-EHR compatible. For more information regarding how to connect this scale to

other electronic devices, please contact Health o meter®Professional Scales Technical Support,

available during normal business hours at 1-800-638-3722.

1100KL Scale Disposal

This Health o meter®Professional scale must be disposed of properly as electronic waste.

Follow the national, regional or local regulations which apply to you for disposal of electronic

waste or batteries. Do not dispose of this device in the domestic waste stream.

1100KL ASSEMBLY INSTRUCTIONS

Before Assembly

Each 1100KL digital handrail scale is shipped disassembled in a single carton. Carefully inspect

the carton for shipping damage before unpacking. If damage is found, contact your shipper or a

Health o meter®Professional representative immediately at 1-800-815-6615. Claims must be

filed with the shipper as soon as possible after receipt of the package. The following information

details what you will find inside the main carton as you unpack the parts for assembly.

To prevent scratching any components, carefully remove each assembly from the carton and

unwrap the packing materials. Set the carton aside for storage. To avoid damaging the scale

parts when unpacking, do not use a box cutter, knife, scissors, or any sharp object to open the

protective inner packaging.

Parts List

(1) Scale platform

(1) Center handrail

(2) Side handrails

(1) Small brown carton

The small brown box contains:

(1) Box containing the AC adapter

(1) Long white box

(1) User Information

(1) Display assembly

The long white box contains:

(4) Feet

(1) 10mm Allen wrench

(1) 5mm Allen wrench

(1) AC adapter holder

(2) Pivot bracket screw covers

(2) Plastic bag containing:

(2) Covers for Display Support (Front & Back)

oHardware for assembly (see Figure 1)

Tools Required

Phillips head screwdriver (not included), Allen wrenches (included).

1100KL ASSEMBLY INSTRUCTIONS (CONTINUED)

Assembling the 1100KL Scale (Refer to Figures 1-7)

Caution: It is recommended that the assembly be performed by two persons.

1. Remove the scale platform from the carton and place scale platform on a flat, level, and dry

surface.

2. Locate and pick up the center handrail. Find the load cell cable connector, located at the

bottom of the center handrail. Untie it and pull it out the bottom (see Figures 2 & 3).

3. Position the center handrail over the handrail supports on the platform and feed the cable

through the handrail support hole located on the right handrail support in the platform. Be sure

not to pinch the cable (see Figures 2, 3, & 7).

4. Position the center handrail over the left and right handrail supports on the platform.

Fasten the handrail to the platform using (4) M8 1.25 x 3/8 screws (B) and (4) M8

washers (E). Use the 5mm Allen wrench to tighten the screws. Do not over tighten

(see Figures 1, 2 & 4).

5. Loosely attach the left and right side handrails to the center handrail, using (4) M10 1.5 x 1

½ screws (A). Use the 8mm Allen wrench to fasten the screws (see Figures 1 & 2).

6. Pull forward on the side handrails to tip the scale and gently place it face down on the floor.

7. Grasp the load cell cable protruding from the bottom of the base of the scale and feed it

through the protective metal shield above the wheel. Plug the connector into the load cell port

located on the side of the platform (see Figure 7).

8. Pull the excess cable through the top of the center handrail (see Figure 2).

9. Thread the (4) feet into the underside of the platform. Each foot should be completely hand

tightened. Once tighten, back feet out 1-½ full turns. This allows for proper load cell operation

for accuracy of the scale (see Figures 2 & 7).

10. Carefully tilt the scale back to an upright position on the floor.

Warning: Do not drop scale, as this can permanently damage the load cells.

11. Adjust the feet to level the scale. Be certain that the feet are not completely tightened into the

platform (refer to the scale platform - feet assembly instruction above).

12. Position the display assembly close to the display support. Plug the load cell cable connector

into the load cell port on the rear of the display assembly (see Figures 2 & 6).

Note: Do not attach the power cord at this point.

13. Align the four mounting holes on the back of the display assembly with the four mounting

holes in the display support. Fasten the display assembly onto the metal display support by

using (4) Phillips pan head M4 screws (D). Use Phillips head screwdriver to tighten the screws

(see Figures 1 & 5).

1100KL ASSEMBLY INSTRUCTIONS (CONTINUED)

14. Place the pivot bracket screw covers over the pivot screws. Fasten the covers to the back of

the display using (4) Phillips pan head M4 screws (D). Use Phillips head screwdriver to tighten

the screws (see Figures 1 & 5).

15. Attach the adapter holder to the center rail using (2) #8 x ½ sheet metal screws (C). Use

Phillips head screwdriver to tighten the screws (see Figures 1 & 2).

16. Connect the AC adapter to the power port in the display. Do not plug the scale into a power

source until the scale is fully assembled (see Figure 6).

17. Attach the front and rear display support covers, applying light pressure to snap these covers

into place (see Figure 2).

18. The scale is now assembled. Plug the AC adapter into a power source and / or insert

batteries.

1100KL ASSEMBLY INSTRUCTIONS (CONTINUED)

Figure 1

Figure 2

1100KL ASSEMBLY INSTRUCTIONS (CONTINUED)

Center handrail

Load cell c

able

Scale platform

Figure 3

Figure 4

Figure 5

Andere Handbücher für PROPLUS 1100KL

Inhaltsverzeichnis

Andere Health O Meter Skala Handbücher

Health O Meter

Health O Meter BFM142 Bedienungsanleitung

Health O Meter

Health O Meter 32910003 Bedienungsanleitung

Health O Meter

Health O Meter Professional 498KL Bedienungsanleitung

Health O Meter

Health O Meter 594KL Kurzanleitung

Health O Meter

Health O Meter Pro Plus 2101KL Installationsanleitung

Health O Meter

Health O Meter PROPLUS 1600KL Bedienungsanleitung

Health O Meter

Health O Meter Health o meter BFM955 Bedienungsanleitung

Health O Meter

Health O Meter 501KL Bedienungsanleitung

Health O Meter

Health O Meter 2650KL Bedienungsanleitung

Health O Meter

Health O Meter PRO PLUS 1100KL Bedienungsanleitung

Health O Meter

Health O Meter 2842KL Bedienungsanleitung

Health O Meter

Health O Meter Pro Plus 2101KL Bedienungsanleitung

Health O Meter

Health O Meter HDM585 Bedienungsanleitung

Health O Meter

Health O Meter Pro Plus 2101KL Bedienungsanleitung

Health O Meter

Health O Meter HDL977 Bedienungsanleitung

Health O Meter

Health O Meter 2500CKL Bedienungsanleitung

Health O Meter

Health O Meter 2210KL-AM Bedienungsanleitung

Health O Meter

Health O Meter 2500KG Bedienungsanleitung

Health O Meter

Health O Meter Weigheasier 2650KG Bedienungsanleitung

Health O Meter

Health O Meter DIGITAL PEDIATRIC SCALE 549KL Bedienungsanleitung

Health O Meter

Health O Meter Health o meter BFM580 Bedienungsanleitung

Health O Meter

Health O Meter BFM580 Bedienungsanleitung

Health O Meter

Health O Meter PRO SERIES 160KG Bedienungsanleitung

Health O Meter

Health O Meter 1101KL Bedienungsanleitung

Beliebte Skala Handbücher anderer Marken

AWS

AWS ZEO-50 Bedienungsanleitung

Gima

Gima Glass Body Fat Analyzer Stücklistenhandbuch

Seca

Seca 374 Bedienungsanleitung

TEC

TEC TEC SL59 SERIES Bedienungsanleitung

Axis

Axis B/E Series Bedienungsanleitung

Alecto

Alecto ACW-40 Bedienungsanleitung

Rice Lake

Rice Lake MSI-4260 IS Bedienungsanleitung

IKA

IKA RCT basic safety control Bedienungsanleitung

ADE

ADE M20011 Bedienungsanleitung

Duronic

Duronic KS3000 Bedienungsanleitung

Digi

Digi SM-720 Bedienungsanleitung

Cardinal

Cardinal CS Series Bedienungsanleitung

Korona

Korona Kastella Bedienungsanleitung

A&D

A&D FC-50Ki Bedienungsanleitung

BDA

BDA CAMARGUE Bedienungsanleitung

Tanita

Tanita HD-357 Bedienungsanleitung

Leifheit

Leifheit 03173 Bedienungsanleitung

Lumme

Lumme LU-1340 Bedienungsanleitung