To adjust the volume, rotate the volume control by your fingertip
up and down. The higher number is, the higher sound there will be.
To increase the volume, turn the volume control up. To decrease
the volume, turn the volume control down.
Volume
control
Your hearing instrument may have up to 4 different listening programs.
When the hearing instrument is turned on, it will automatically be
in program 1. Each time you press the memory switch, the hearing
instrument will move to the next program. The sequence is 1, 2, 3
and 4. Your hearing instrument will alert and help you identify which
program you are using. When you select program 1 you will hear one
beep, program 2 will emit two beeps, and so on.
Memory
switch
/program
button
ON and OFF
function
To turn on the hearing instrument – press and hold the program button
on the back of the hearing instrument for at least one second. A green
light will briefly flash. The hearing aid is now on. (Please note the green
light does not remain on when the instrument is on.)
The device is equipped with power-on delay function, so it needs a
few seconds to get started. Once you get used to wearing the hearing
aid you may prefer to only turn it on when the device is on your ear.
To turn off the hearing instrument, press and hold the program button
on the back for at least a second – there will be a brief blue light flash
and then the aid will be off.
Programs HDR200 HDR400
1For indoor quiet environments For quieter environments
2For indoor noisy environments For noisier environments
3For outdoors For music
NB:
The programs in the HDR200 cannot be further altered.
The programs in the HDR400 can be fully adjusted by Hearing
Direct if required, but unless otherwise discussed before shipment,
have been set as per the table.
NB: Before wearing the instrument, make sure that the volume
is not at the maximum (number 4).
10 11
