Heartland WaveReader Speed Queen Bedienungsanleitung

www.heartlandMicroPayments.com 2115 Chapman Road, Suite 159, Chattanooga TN 37421 800.332.4835

Single Machine

Side-Car

Enclosure

Coin & Card

MDC/Pulse Mode

METER CASE

MOUNTING

WaveRider Installation

www.heartlandMicroPayments.com

Laundry Machine Model Numbers

This document applies to the WaveReader installation process

following Alliance/Speed Queen model numbers:

If you cannot locate the model number of the machine you require in the

lists above, please contact MicroPayments Customer Service at:

Tel: 800-332-4835 Press 2

Washers

Dryers

www.heartlandMicroPayments.com

This following tables list the required tools & components for the installation

process. If you cannot locate and/or identify any of the components listed above,

please contact MicroPayments Customer Service at 800-332-4835 , then press 2.

Installation Kit Contents &

Required Tools

Item

Qty

Part Number

Description

WLAU-NNNNNN

WaveReader

Required Tools

#10 Pin-in-Star Torx Driver

¼” Socket Driver

7/16” Socket & Ratchet

Phillips Head Screwdriver (medium)

Flat Head Screwdriver (medium)

www.heartlandMicroPayments.com

KIT-HRN-050-6-012

Harness Kit for Speed Queen Coin & Card

Item

Qty

Part Number

Description

ASM-050-6-012

Stuffed Speed Queen Coin Drop board

AYS-050-6-009

Cable, Speed Queen Pulse for WR + Coin

Interface Harness

www.heartlandMicroPayments.com

KIT-050-6-032S

Speed Queen Side-Car Enclosure Kit

(meter case mounting)

Item

Qty

Part Number

Description

MFP-050-6-032-011

Side Car Cover

MFP-050-6-032-012

Side Car Base

MFP-050-6-027

Side Car Access Door - Speed Queen

SRW-1/4-20X.50HM

Bolt 1/4-20x1/2 Hex Zinc Plated

SRW-632X.188PPL

Screw 6-32 x 3/16" Pan Head Phil locking

SRW-632X.375BTSS

Screw 6-32 x 3/8"Button Torx Socket

WAS-1/4-20L

Washer 1/4-20 locking MMC#91102A750

Side Car Housing

2Using a screw driver, remove the

screws that secure the backsplash

and lower the panel.

!! WARNING !!

MAKE SURE THAT ALL POWER HAS BEEN REMOVED FROM

THE MACHINE BEFORE ATTEMPTING TO INSTALL ANY

HARDWARE OR CABLING!

Installation

1Remove the current coin vault

service door, and remove the

locking mechanism from the service

door. You will need the lock, later.

Preparation

Disconnect the laundry machine from all power sources

before performing any of the following steps.

www.heartlandMicroPayments.com

Installation

www.heartlandMicroPayments.com

Route the WaveReader

interface harness

along the interior of

the backsplash

enclosure and the

large single end (J1) of

the WaveReader

harness end into the

meter case via the

main cable access hole.

Pull the harness through the

meter case’s service door

opening, and then through

the cable access hole in the

new Service Door as shown.

Install the locking

mechanism that was

removed from the

original Service Door

onto the new Service

Door supplied in the

Side Car Kit.

Installation

6Pull the harness

through the meter

case’s service door

opening, and then

through the cable

access hole in the new

Service Door as shown.

On the main panel,

connect J3 of the

WaveReader harness to

the H5 connector on the

Speed Queen control

board, in the yellow box.

On some Quantum control

boards, the connector may be

labeled H4.

www.heartlandMicroPayments.com

8On the main panel,

connect J3 of the

WaveReader harness

to the H1 connector

on the Speed Queen

control board, in the

yellow box.

Installation

www.heartlandMicroPayments.com

On the control board locate

the plug where the coin

drop is connected. It

should be a small three (3)

pin plug that routes out of

the H3 connector from the

control board.

Disconnect it.

11 Connect the Coin Drop into the other

side of the Coin Adapter Board.

Locate the Coin

Adapter Board.

Connect J4 of the

WaveReader harness

to the mating

connector on the

Coin Adapter Board.

Installation

www.heartlandMicroPayments.com

The completed

wiring assembly

should look like

this…

Wiring Diagram

Locate the Serial Jumper on the

control board and remove it.

Inhaltsverzeichnis

Beliebte Geldzähler und Münzsortierer Handbücher anderer Marken

Coinco

Coinco Guardian 6000 Montage- und Bedienungsanleitung

Hyundai MIB

Hyundai MIB SB-2000 Bedienungsanleitung

Royal Sovereign

Royal Sovereign RBC-2100 Bedienungsanleitung

Peradon

Peradon DCT Bedienungsanleitung

Beckmann

Beckmann EMS-58 Bedienungsanleitung

MEI

MEI Economy Series Bedienungsanleitung

Safescan

Safescan 1450 Bedienungsanleitung

Hamilton Manufacturing Corporation

Hamilton Manufacturing Corporation Audit Pro 2000 Kurzanleitung

Alberici

Alberici EP-1P0S Bedienungsanleitung

PRO Intellect Technology

PRO Intellect Technology PRO CS-80E Bedienungsanleitung

Alberici

Alberici AL66 FG modifiable ccTalk Bedienungsanleitung

Inepro

Inepro Multi Connectivity Box Bedienungsanleitung

Standard Change-Makers

Standard Change-Makers MC Series Bedienungsanleitung

Safescan

Safescan 1250 SGD Bedienungsanleitung

Alberici

Alberici Hammer Two Bedienungsanleitung

Money Control

Money Control SR3 Bedienungsanleitung

Ribao

Ribao CS-600A Bedienungsanleitung

Coinco

Coinco Guardian GLX Series Original Betriebsanleitung