Heat & Glo SL-350TRS-CE-D Montageanleitung

Heat & Glo • SL-350TRS-CE-D • 2033-900 Rev. N • 10/07 1

- Do not store or use petrol or other flam-

mable vapors and liquids in the vicinity of

this or any other appliance.

-What to do if you smell gas

• Do not try to light any appliance.

• Do not touch any electrical switch.

• Do not use any phone in your building.

• Immediately call your gas supplier from

a neighbor's phone. Follow the gas

supplier’s instructions

• If you cannot reach your gas supplier,

call the fire department.

- Installation and service must be performed

by a qualified installer or competent

person.

WARNING: IMPROPER INSTALLATION,

ADJUSTMENT, ALTERATION, SERVICE

OR MAINTENANCE CAN CAUSE INJURY

OR PROPERTY DAMAGE. REFER TO

THIS MANUAL. FOR ASSISTANCE OR

ADDITIONAL INFORMATION CONSULT A

QUALIFIED INSTALLER OR

COMPETENT PERSON.

READ THIS MANUAL BEFORE INSTALLING OR

OPERATING THISAPPLIANCE. THIS INSTALLERS

GUIDE MUST BE LEFT WITH APPLIANCE FOR

FUTUREREFERENCE.

Please contact your Heat & Glo dealer with any

questionsor concerns. For thenumber of yournearest

Heat & Glo dealer, please call 1-888-427-3973.

Heat & Glo, a brand of Hearth & Home Technologies Inc.

20802Kensington Blvd., Lakeville,MN55044

These instructions are only valid if the

following country symbol is on the appliance.

If this symbol is not present on the appliance,

it is necessary to refer to the technical

instructions which will provide the necessary

information concerning the modification of the

appliance to the conditions of use for the

country.

0087

These instructions are valid for the following

countries: GB, IE

WARNING:

IF THE INFORMATION IN THESE

INSTRUCTIONS IS NOT

FOLLOWED EXACTLY,A FIRE OR

EXPLOSION MAY RESULT

CAUSING PROPERTY DAMAGE,

PERSONAL INJURY, OR DEATH.

This product is covered by one or more of the following patents: (United States) 4,112,913; 4,408,594; 4,422,426; 4,424,792; 4,520,791; 4,793,322;

4,852,548; 4,875,464; 5,000,162; 5,016,609; 5,076,254 5,191,877; 5,218,953; 5,328,356; 5,429,495; 5,452,708; 5,542,407; 5,613,487; (Australia)

543790; 586383; (Canada) 1,123,296; 1,297,746; 2,195,264; (Mexico) 97-0457; (New Zealand) 200265; or other U.S. and foreign patents pending.

Model:

SL-350TRS-CE-D Installers Guide

Heat & Glo • SL-350TRS-CE-D • 2033-900 Rev. N • 10/07

SAFETY AND WARNING INFORMATION

READ and UNDERSTAND all instructions carefully before starting the installation.

FAILURE TO FOLLOW these installation instructions may result in a possible fire

hazard and will void the warranty.

Prior to the first firing of the stove, READ the Using Your Fireplace section of the Users

Guide.

DO NOT USE this appliance if any part has been under water. Immediately CALL a

qualified service technician to inspect the unit and to replace any part of the control

system and any gas control which has been under water.

THIS UNIT IS NOT FOR USE WITH SOLID FUEL.

Installation and repair should be PERFORMED by a qualified service person. The

appliance and flue system should be INSPECTED before initial use and at least

annually by a professional service person.

Always KEEP the appliance clear and free from combustible materials, petrol, and

other flammable vapors and liquids.

NEVER OBSTRUCT the flow of combustion and ventilation air. Keep the front of the

appliance CLEAR of all obstacles and materials for servicing and proper operations.

Due to the high temperature, the appliance should be LOCATED out of traffic areas

and away from furniture and draperies. Clothing or flammable material SHOULD NOT

BE PLACED on or near the appliance.

Children and adults should be ALERTED to the hazards of high surface temperature

and should STAY AWAY to avoid burns or clothing ignition. Young children should be

CAREFULLY SUPERVISED when they are in the same room as the appliance.

These units MUST use one of the fluing systems described in the Installing the Fireplace

section of the Installers Guide. NO OTHER flue systems or components MAY BE USED.

This gas stove and flue assembly MUST be vented directly to the outside and MUST

NEVER be attached to a chimney serving a separate solid fuel burning appliance.

Each gas appliance MUST USE a separate flue system. Common flue systems are

PROHIBITED.

INSPECT the external terminal cap on a regular basis to make sure that no debris is

interfering with the air flow.

The glass door assembly MUST be in place and sealed, and the trim door assembly

MUST be in place on the stove before the unit can be placed into safe operation.

DO NOT OPERATE this appliance with the glass door removed, cracked, or broken.

Replacement of the glass door should be performed by a licensed or qualified service

person. DO NOT strike or slam the glass door.

The glass door assembly SHALL ONLY be replaced as a complete unit, as supplied

by the gas stove manufacturer. NO SUBSTITUTE material may be used.

DO NOT USE abrasive cleaners on the glass door assembly. DO NOT ATTEMPT to

clean the glass door when it is hot.

Turn off the gas before servicing this appliance. It is recommended that a qualified

service technician perform an appliance check-up at the beginning of each heating

season.

Any safety screen or guard removed for servicing must be replaced before operating

this appliance.

This appliance is intended for use on a gas installation with a governed meter.

Heat & Glo • SL-350TRS-CE-D • 2033-900 Rev. N • 10/07 3

Table of Contents

Safety and Warning Information .................................. 2

Service Parts List ......................................................... 4

Section 1: Approvals and Regulations ....................... 7

ApplianceCertification ................................................ 7

InstallationRegulations ............................................... 7

Section 2: Getting Started ........................................... 8

Introducing the Heat & Glo Gas Fireplaces................. 8

Pre-installationPreparation......................................... 8

Section 3: Installing the Fireplace ............................ 10

Step 1 Locating the Fireplace ................................. 10

Step 2 Framing the Fireplace ..................................11

Step 3 Installing the Flue System ........................... 12

A. Flue SystemApprovals ........................... 12

B. Installing Flue Components..................... 23

C. Flue Termination ..................................... 26

Step 4 Positioning, Levelingand

Securing the Fireplace ................................ 31

Step 5 The Gas Control Systems........................... 31

Step 6 The Gas Supply Line ................................... 32

Step 7 Gas Pressure Requirements ...................... 33

Step 8 Wiring the Fireplace .................................... 33

Step 9 Finishing ...................................................... 34

Step 10

Installing Trim, Logs & Ember Material.........

Installing theTrim ........................................ 35

Positioning the Logs .................................... 36

Placing the Ember Material ......................... 38

Step 11 Before Lighting the Fireplace....................... 39

Step 12 Lighting the Fireplace .................................. 39

Afterthe Installation ..................................... 39

Section 4: Maintaining and Servicing

Your Fireplace .......................................... 40

Section 5: Troubleshooting ....................................... 42

Î= Containsupdatedinformation.

Heat & Glo • SL-350TRS-CE-D • 2033-900 Rev. N • 10/07

LogSetAssembly

Service Parts Diagram

Service Parts SL-350TRS-CE-D

Beginning Manufacturing Date: 9-03

Ending Manufacturing Date: _______

Partnumberlist on following page.

Heat & Glo • SL-350TRS-CE-D • 2033-900 Rev. N • 10/07 5

(NG, LP) Service Parts List SL-350TRS-CE-D

ITEM DESCRIPTION SERIAL # PART NUMBER

Log Set Assembly LOGS-350CE-D

1 Log 1 SRV327-701

2 Log 2 SRV2033-701

3 Log 3 SRV705-703

4 Log 4 SRV530-716

5 Log 5 SRV438-724

6 Log 6 SRV540-704

7 Grate Assembly 2033-013

8BasePan 2033-105

Pre Sept 2007 2033-007

Post Sept 2007 2033-027

Pre Sept 2007 2033-008

Post Sept 2007 2033-028

Pre Sept 2007 2033-009

Post Sept 2007 2033-029

Pre 0021061383 GLA-350TRS

Post 0021061383 GLA-3504TRS

11 Hood SRV540-174

Pre 00295123 540-382A

Post 00295123 2033-020

13 Door Assembly, Lower Post 00295123 2033-021

14 Junction Box 546-250A

Louver, Upper Pre 00295123 540-256A

Louver, Lower Pre 00295123 540-257A

Glass Latch Assembly 386-122A

Exhaust Baffle 530-299

Mineral Wool 050-721

Gasket Assembly

Includes: Burner Neck, Shutter Bracket, Vent, Seal Cap, Valve

Plate, and Air Passage Gaskets

Touch Up Paint TUP-GBK-12

Wall Switch ( off White) WSK-21

Wall Switch (White) WSK-21-W

Conversion Kit N NGK-350TRSCE-D

Conversion Kit P LPK-350TRSCE-D

Conversion Kit B BGK-350TRSCE-D

Pilot Orifice N 529-512

Pilot Orifice P/ B 200-2630

Regulator N 230-1570

Regulator P/B 230-1520

Additional service part numbers may appear on following page.

Burner N

Burner P

Glass Door Assembly

12 Door Assembly

IMPORTANT THIS IS DATED INFORMATION. When Requesting service or replacement parts for your appliance, please

provide model number and serial number. All parts listed in this manual may be ordered from an authorized dealer.

2113-080

Burner B

Heat & Glo • SL-350TRS-CE-D • 2033-900 Rev. N • 10/07

Valve assembly

Service Parts SL-350TRS-CE-D

Beginning Manufacturing Date: 9-03

Ending Manufacturing Date: _______

ITEM DESCRIPTION SERIAL # PART NUMBER

Pilot Assembly N 529-540A

Pilot Assembly P 529-541A

Pre Sept 2007 2033-103

Post Sept 2007 2033-133

Orifice N (#44C) 582-844

Orifice B (# 56C) 582-856

Orifice P (#55C) 582-855

4 Flexible Gas Connector 383-302A

5 Flex Ball Valve Assembly 2078-022

6 Piezo Ignitor 291-513

7 Wire Assembly 049-552A

8 On/Off Switch Assembly 060-521A

Valve N 060-524

Valve P 060-526

Pre Sept 2007 529-169

Post Sept 2007 2118-104

Valve Bracket

IMPORTANT THIS IS DATED INFORMATION. When Requesting service or replacement parts for your appliance, please

provide model number and serial number. All parts listed in this manual may be ordered from an authorized dealer.

2 Pilot Bracket

Heat & Glo • SL-350TRS-CE-D • 2033-900 Rev. N • 10/07 7

Appliance Certification

The Heat & Glo fireplace models discussed in this

Installers Guide have been tested to certification

standards and listed by the applicable laboratories.

CERTIFICATION

MODEL LABORATORY TYPE STANDARD

SL-350TRS-CE-D

Advantica Gas Fireplace 90/396/EEC

Installation Regulations

Before installation check that local distribution conditions, nature of gas and

pressure, and adjustment of the appliance are compatible.

This appliance must be installed with the rules in force, and used only in a

sufficiently ventilated space. Consult instructions before installation and use of

this appliance.

Approvals

and

Regulations

Heat & Glo • SL-350TRS-CE-D • 2033-900 Rev. N • 10/07

Heat & Glo direct flue gas fireplaces are designed to

operate with all combustion air siphoned from outside

of the building and all exhaust gases expelled to the

outside.

The information contained in this Installers Guide,

unless noted otherwise, applies to all models and gas

control systems.

Gas fireplace diagrams, including the dimensions, are

shown in this section.

This gas fireplace and its components are tested and

safe when installed in accordance with this Installers

Guide. Report to your dealer any parts damaged in

shipment, particularly the condition of the glass. Do

not install any unit with damaged, incomplete, or

substitute parts.

The flue system components and trim doors are

shipped in separate packages. The gas logs are

packaged separately and must be field installed.

Read all of the instructions before starting the

installation. Follow these instructions carefully

during the installation to ensure maximum safety

and benefit. Failure to follow these instructions

will void the owner’s warranty and may present a

fire hazard.

The Heat & Glo Fireplace Products, Inc. Warranty will

be voided by, and Heat & Glo Fireplace Products, Inc.

disclaims any responsibility for, the following actions:

• Installation of any damaged fireplace or flue system

component.

• Modification of the fireplace or direct flue system.

• Installation other than as instructed by Heat & Glo

Fireplace Products, Inc.

• Improper positioning of the gas logs or the glass

door.

• Installation and/or use of any component part not

manufactured and approved by Heat & Glo Fire-

place Products, Inc., not withstanding any indepen-

dent testing laboratory or other party approval of

such component part or accessory.

ANY SUCH ACTION MAY POSSIBLY CAUSE A

FIRE HAZARD.

Introducing the

Heat & Glo

Gas Fireplaces

Pre-installation

Preparation 2

Getting

Started

Heat & Glo • SL-350TRS-CE-D • 2033-900 Rev. N • 10/07 9

Figure 1. Diagram of the SL-350TRS-CE-D

When planning a fireplace installation, it’s necessary to determine:

•Where the unit is to be installed.

•The flue system configuration to be used.

•Gas supply piping.

•Electrical wiring.

•Framing and finishing details.

•Whether optional accessories—devices such as a fan, wall switch, or

remote control—are desired.

If the fireplace is to be installed on carpeting or tile, or on any combustible

material other than wood flooring, the fireplace should be installed on a metal

or wood panel that extends the full width and depth of the fireplace.

21-3/8 in.

544 mm

6 in.

153 mm

2-1/4 in.

58 mm

3-5/8 in.

93 mm

6-7/8 in.

174 mm

29-1/8 in.

741 mm

28-1/8 in.

714 mm

33 in.

837 mm

41-3/4 in.

1061 mm

8 in.

203 mm

GAS LINE

ACCESS

ELECTRICAL

ACCESS

6-5/8 in.

167 mm

15-7/8 in.

402 mm

15-1/8 in.

384 mm

32-1/2in.

827 mm

24 in.

610 mm

16-3/8 in.

414 mm 8-3/4 in.

223 mm

11-3/8 in.

289 mm

22-3/4 in.

577 mm

TOP HEAT SHIELD

(FLUE COLLAR COVER PLATE)

GAS

CONTROLS

HOOD

TOP STANDOFFS

GAS

ACCESS

BOTTOM

GRILLE COVER

RATING PLATE/LABELS

ELECTRICAL GAS

Heat & Glo • SL-350TRS-CE-D • 2033-900 Rev. N • 10/07

7.6 cm

1.3 cm

AB CDE

86.4cm 41.3cm 72.8cm 100.1cm 141.6cm

Figure 2. Fireplace Dimensions, Locations, and

Space Requirements

Installing the

Fireplace

The diagram below shows space and clearance

requirements for locating a fireplace within a room.

Step 1

Locating the

Fireplace

Figure 3. Heat Shield

NOTE:

Dimensions are

shown with the

sides, back

and/or corners

of the unit 1/2

inch from the

wall.

The heat shield must be

attached as shown if

combustible materials

are placed directly on

top standoffs (Figure 3).

The minimum clearance

to a perpendicular wall

extending past the face

of the fireplace is 7.62cm.

The back of the fireplac-

es may be recessed

into combustible con-

struction, as shown

below.

MODEL: SL-350TRS-CE-D RECESSED DEPTH: 41.3cm

Clearance Requirements

The top and back of the

fireplace are defined by

stand-offs.

Minimum Clearances from the Fireplace to Combustible Materials

Glass

Front Floor Back of

Fireplace Sides of

Fireplace Top of

Fireplace Ceiling

91.4cm 0 1.3cm 1.3cm 3.8cm 79cm

TOP STANDOFFS

HEAT SHIELD

INSTALLED

Andere Handbücher für SL-350TRS-CE-D

Inhaltsverzeichnis

Andere Heat & Glo Kamin im Innenbereich Handbücher

Heat & Glo

Heat & Glo 8000C-IFT Bedienungsanleitung

Heat & Glo

Heat & Glo RED60 Bedienungsanleitung

Heat & Glo

Heat & Glo EXCLAIM-50 Bedienungsanleitung

Heat & Glo

Heat & Glo TRUE-36C Bedienungsanleitung

Heat & Glo

Heat & Glo 6000C-LP Bedienungsanleitung

Heat & Glo

Heat & Glo PIER-TVFL-IPI Bedienungsanleitung

Heat & Glo

Heat & Glo Wood Burning Fireplace HST-48D Bedienungsanleitung

Heat & Glo

Heat & Glo RHW-485 Bedienungsanleitung

Heat & Glo

Heat & Glo BAY-40 Bedienungsanleitung

Heat & Glo

Heat & Glo I30X-N-AU Bedienungsanleitung

Heat & Glo

Heat & Glo BIR50 Bedienungsanleitung

Heat & Glo

Heat & Glo Heat & Glo XLR-PLUS-N-AU Bedienungsanleitung

Heat & Glo

Heat & Glo SL-550TV-IPI-E Bedienungsanleitung

Heat & Glo

Heat & Glo SUPREME-M-I30AU Bedienungsanleitung

Heat & Glo

Heat & Glo SL-550TR-E Bedienungsanleitung

Heat & Glo

Heat & Glo CF230E-B Bedienungsanleitung

Heat & Glo

Heat & Glo 6000GCF-IPILP Bedienungsanleitung

Heat & Glo

Heat & Glo SL-5F-IFT Bedienungsanleitung

Heat & Glo

Heat & Glo 6000CMOD-IPI Bedienungsanleitung

Heat & Glo

Heat & Glo Cosmo-SXT-IPI Bedienungsanleitung

Heat & Glo

Heat & Glo 6000CMOD-IFT Bedienungsanleitung

Heat & Glo

Heat & Glo EXCLAIM-50 Bedienungsanleitung

Heat & Glo

Heat & Glo STELLAR 3-IDOD-24-G Bedienungsanleitung

Heat & Glo

Heat & Glo CFX-CRESCENT Bedienungsanleitung

Beliebte Kamin im Innenbereich Handbücher anderer Marken

Brigantia

Brigantia 35-DVRS31N-2 Betriebsanleitung

Nordpeis

Nordpeis Bergen Bedienungsanleitung

Superior

Superior BCT2536TMN Bedienungsanleitung

Quadra-Fire

Quadra-Fire 5100I-GD-B Bedienungsanleitung

Renaissance

Renaissance RUMFORD 1000 Bedienungsanleitung

Lacunza

Lacunza IV-800 Bedienungsanleitung

Baxi

Baxi 940 Gebrauchsanweisung

Dru

Dru Maestro 60/2 Tall RCH Bedienungsanleitung

Diamond Fireglass

Diamond Fireglass SS-O22 Bedienungsanleitung

HearthStone

HearthStone Windsor Bay 8830 Programmierhandbuch

Napoleon

Napoleon ASCENT B42 Bedienungsanleitung

Enviro

Enviro E33GI Bedienungsanleitung

Smeg

Smeg L30 FABE Montageanleitung

KEDDY

KEDDY K700 Bedienungsanleitung

Godin

Godin 3451 Bedienungsanleitung

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Bedienungsanleitung

Desa

Desa CCFPDFT Bedienungsanleitung

Miles Industries

Miles Industries Vogue 1300IRN Handbuch