Heatcom HC 60 Bedienungsanleitung
HC 60
QUICK GUIDE
Scan QR on backside for full documentation
UK / DE /
DK / FI /
NO / SE
Heatcom
Corporation A/S
Barmstedt Allé 6
DK–5500 Middelfart
UK – User guide &
installation instructions 7
DE – Benutzerhandbuch
& Installationsanleitung 13
DK – Bruger & installationsvejledning 19
FI – Käyttöopas ja asennusohjeet 23
NO – Brukerveiledning og
installasjonsinstruksjoner 27
SE – Användarhandbok och
monteringsanvisning 31
1 2 3 4
4
5
1 6 5
374
2
6
7
HC60 contains the necessary functions to full the
demands set out in Ecodesign Lot20.
The thermostat is programmable, has adaptive heat-
ing and open window function. The control of the oor
heating is then easily adapted to t the needs in
different rooms.
A temperature limiting function is included, ideal
for use together with wooden or engineered oor
boards.
The temperature is measured through oor sensor,
room sensor or the 2 in combination.
INTRODUCTION
UKSE NO FI DK DE
BUTTON SHORT PRESS LONG PRESS
1 Switches thermostat On/Off
2
Switches between
“Manual/Auto” mode
In settings, “Acknowledge”
When “On”, enters user
settings
When “Off”, enters
advanced settings
3Temperature or setting
“down” Hold both to activate
/de-activate “Screen lock”
Button 4 long press when
“off” will enter factory
settings
4Temperature or setting “up”
DISPLAY DESCRIPTION
1 Shows time of day
2 Current temperature
3 Shows day of the week
4 Current operation mode
5When in “Auto”, shows active “Event” as number and as icon
6 “Screen lock” active
7 “Heating” active
8
Supply voltage 90-240 V / 50-60 Hz
Max. load 3600 W
IP class IP20
Temperature range +5° C ... +40° C
Sensor settings Floor / Room / Room with oor sensor as
temperature limiter
Display type 1,6” LCD backlit
Floor sensor type 10 KΩ @25°C, length 3m
Colour White, RAL 9003
Dimensions 82 x 82 x 53 mm
Standards LVD 2014/35/EU • EN60730-1 • EN60730-
2-9 • EN50081-1 • EN50082-1 • RoHS
(EU)2015/1188 ECO Design • REACH
regulation (EC) No.1907/2006
SPECIFICATIONS
9
UKSE NO FI DK DE
PRECAUTIONS
• Do not install thermostat in direct sunlight
• Do not install on severely cold outer walls
• If the thermostat is not in the same room as the
heating, only oor sensor can be used
• Install oor sensor min 0,5m from the wall
(cable can be extended with up to 7m, min.
2x0,5mm² cable)
• Do not cover the thermostat, this will cause
overheating
10
Andere Handbücher für HC 60
1
Inhaltsverzeichnis
Sprachen:
