v
Contents
Contents
Safety Precautions .............................................i
Power Supply.................................................................................i
Operating Environment ...........................................................ii
Maintenance / Other ............................................................... iii
WARNING / CAUTION Labels................................................ iv
Chapter1Before Operation
1. Features................................................... 1-1
2. Setting Up the Machine ......................... 1-2
2-1. Components.............................................................. 1-2
2-2. Removing the Press Release Lever................... 1-3
2-3. Locking the Bearing Support Levers ............... 1-4
2-4. Attaching the Parts ................................................. 1-5
3. Names and Functions............................. 1-8
4. Describing Control Panel..................... 1-10
5. Screen Menus........................................1-11
6. Handling Paper.....................................1-12
6-1. Paper Used ...............................................................1-12
6-2. Precautions on Stacking Paper ........................1-12
7. Emergency Stop....................................1-14
Chapter2Basic Operation
1. Standard Folding of Standard Paper.... 2-1
1-1. Standard Paper......................................................... 2-1
1-2. Standard Folding ..................................................... 2-2
1-3. Operation Procedures ........................................... 2-2
Chapter3Advanced Operation
1. Standard Folding of Special Paper ....... 3-1
1-1. Single Folding Thick Paper................................... 3-1
1-2. Double Folding Thick Paper................................ 3-2
1-3.
Double Folding B6 Thin Paper (EU)/Small
Thin Paper (North America)............................................3-4
2. Custom Folding of Standard Paper ...... 3-7
3.
Standard Folding of Non-Standard Size
Paper..............................................................3-11
4. Cross Folding ........................................3-13
4-1. Cross Folding Standard Size Paper.................3-14
4-2. Cross Folding Non-Standard Size Paper.......3-17
5. Using Art Paper and Coated Paper..... 3-19
5-1. Characteristics of Art Paper and Coated
Paper...........................................................................3-19
5-2. Operation Procedures .........................................3-19
6. Correcting Folding Misalignment.......3-20
6-1. Correcting Folding Misalignment along
Vertical Length of Paper .....................................3-20
6-2. Correcting Folding Misalignment along
Sides of Paper..........................................................3-23
Chapter4
Troubleshooting Guide
1. Correcting Deformed Folding ....................... 4-1
2. Removing Jammed Paper...................... 4-1
2-1. When Paper Has Jammed Near the Paper
Feed Ring .................................................................... 4-1
2-2. When Paper Has Slipped at the Paper
Feed Section.............................................................. 4-2
2-3. When Paper Has Coiled Around the Rubber
Roll................................................................................. 4-3
2-4. When Paper Has Jammed at the First
Folding Plate.............................................................. 4-4
2-5. When Paper Has Jammed at the Second
Folding Plate.............................................................. 4-5
2-6. When Paper Has Jammed Near the
Stacker.......................................................................... 4-7
3. Error Messages ....................................... 4-8
4. Troubleshooting..................................... 4-9
Chapter5Cleaning the Unit
1. Cleaning Each Section............................ 5-1
1-1. Cleaning the Rubber Roll ..................................... 5-1
1-2. Cleaning the Paper Feed Rings.......................... 5-2
1-3. Cleaning the Paper Separator ............................ 5-3
1-4. Cleaning the Paper Sensor .................................. 5-4
1-5. Cleaning the Ejection Gate Sensor................... 5-4
1-6. Cleaning the Paper Ejection Belts..................... 5-4
Chapter6Appendix
Specication.................................................. 6-1
