8
displayed again, so as to avoid the failure of the normal temperature cabinet due to the
change of control parameters.
In case of power failure or other faults, the normal cabinet will be temporarily stopped,
and the temperature inside the normal cabinet will rise, and the temperature of the box
may rise from 5℃to more than 15℃within one hour. If the electricity cannot be
received within a short time, the stored goods should be taken out and put into other
normal normal cabinets for storage, so as to avoid damage and loss of the preserved
goods
Do not put items into the normal temperature cabinet that has just been connected to
the power supply. Let the empty container run for a period of time
Store refrigerated items in containers.
When putting in the goods, if the goods have too much moisture or too dry will affect
the change of humidity in the box, the goods had better be sealed and kept;Similarly,
the humidity of the working environment of the normal temperature cabinet will also
affect the change of humidity inside the cabinet, especially if the door is opened too
much and the door body is not closed well.
The storage of goods should not exceed 1/3 of the box capacity each time. After
reaching the set temperature and running normally for 24 hours, the goods with
another 1/3 of the box capacity should be put into storage.
Please be careful not to block the air outlet and suction outlet when putting in the
object.
Do not put items directly in the outlet or suction outlet of the normal temperature
cabinet, otherwise it will affect the air circulation and refrigeration effect of the normal
temperature cabinet
Do not try to open the door in the process of cooling, or it will cause the temperature to
rise.
Due to the inertia of refrigeration, there may be some difference between the display
temperature and the set temperature when the product reaches the set value and
stops Different, this is normal phenomenon.
Note: children are not allowed to play games in the room temperature cabinet.
Do not change the setting temperature frequently within a short period of time, or the
setting effect may not be achieved due to the large inertia of hot and cold;When
putting in the goods, it is necessary to ensure that there is a certain air circulation
space around the box, especially the temperature sensor inside the box (for collecting
the temperature inside the box), otherwise it will affect the stability and accurate
display control of the temperature inside the box!
