Hello Kitty KT2055 Bedienungsanleitung

OWNER'S MANUAL
KT2055
TEA CUP SHAPED CLOCK RADIO
WITH NIGHT LIGHT
CAUTION : ELECTRICALLY OPERATED PRODUCT-
Please use care when plugging into AC outlet.
Meijer.com

WARNING
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE
OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
The lightning flash with arrow-
head symbol, within an equi-
lateral triangle is intended to
alert the user to the presence of
uninsulated 'dangerous voltage'
within the product's enclosure
that may be of sufficient
magnitude to constitute a risk
of electric shock to persons.
The exclamation point within
an equilateral triangle is in-
tended to alert the user to
the presence of important
operating and maintenance
(servicing) instructions in
the literature accompany-
ing the appliance. .
CAUTION: TO REDUCE THE
RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(ON BACK), NO USER
SERVICEABLE PARTS INSIDE
REFER SERVICING TO
QUALIFIED SERVICE
PERSONNEL. .
WARNING
DO NOT OPEN
RISK OF ELECTRIC SHOCK
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two blades
and a third grounding prong. The wide blade or the third prong are provided for your
safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments / accessories specified by the manufacturer.
12. Unplug this apparatus during lightning storms or when unused for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
14. This appliance shall not be exposed to dripping or splashing water and that no object
filled with liquids such as vases shall be placed on the apparatus.
1
Meijer.com

2
The battery back-up system will remember the time and alarm settings of course,
but it can do more than that. As long as there is a fresh 9 - volt battery installed,
the system will operate the radio or buzzer alarm to wake you up even if the
power is off at your normal wake up time.
We have taken great care to make sure that your Clock Radio was in perfect
working order when it left our factory. It has been designed to give you many years
of enjoyment and trouble free operation. Read this manual before operating this
unit to become familiar with its features and obtain the performance that will bring
you continued enjoyment for many years.
For future reference, record the serial number in the space provided.
Model Number: KT2055
Serial Number :
Welcome to the world of Hello Kitty.
.
15. The mains plug is used as disconnect device. The mains plug of apparatus should not
be obstructed OR should be easily accessed during intended use. To be completely
disconnect the power input, the mains plug of apparatus shall be disconnected from
the mains.
16. Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
17. Caution Marking and rating plate was located at bottom enclosure of the apparatus.
18. WARNING - THIS IS A CLOCK RADIO - NOT A TOY! TO AVOID RISK OF FIRE, BURNS,
PERSONAL INJURY AND ELECTRIC SHOCK IT SHOULD NOT BE PLAYED WITH OR
PLACED WHERE SMALL CHILDREN CAN REACH IT.
Meijer.com

3
IMPORTANT NOTES
Avoid installing the unit in locations described below :
Places exposed to direct sunlight or close to heat radiation appliances such
as electric heaters.
Dusty places.
Places subject to constant vibration.
Humid or moist places.
This radio is designed to operate on normal 120V 60Hz AC power only. Do not
attempt to operate the radio on any other power source. You could cause damage
to the radio that is not covered by your warranty.
This radio should be connected to an AC outlet that is always 'live'. Do not connect
it to an outlet that is controlled by a wall switch. When the power to the radio is
interrupted, the battery back up system takes over to maintain the time and alarm
settings. To maximize the life of the back up battery, keep the radio connected
to a 'live' AC outlet at all times.
This radio uses a polarized AC plug which has one blade wider that the other. This
plug will only fit into a polarized AC outlet. This is a safety feature. If the plug will not
fit, you may have an older non-polarized AC outlet. Do not defeat the safety feature
by trying to file the wider blade, or replacing the plug. Contact an electrician to
replace your outdated outlet.
POWER SOURCE
AC Outlet
AC Plug
Meijer.com

PREPARATION FOR USE
UNPACKING AND SET UP
BATTERY BACK UP SYSTEM
Remove the clock radio from the carton and remove all packing material from
the clock radio. We suggest that you save the packing material, in the
unlikely event that your radio ever needs to be returned for service. The
original carton and packing material is the only safe way to pack your radio to
protect it from damage in transit.
Remove any descriptive labels or stickers on the front or top of the cabinet. Do
not remove any labels or stickers from the back or bottom of the cabinet.
Note the serial number on the bottom of your radio and write this number in the
space provided on Page 2 of this manual.
Place your clock radio on a level surface such as a table, desk or shelf, convenient
to an AC outlet, out of direct sunlight , and away from sources of excess heat,
dirt, dust, moisture, humidity, or vibration.
Unwind the A C power cord and extend it to its full length. The FM antenna is
built in to this cord. It must be fully extended to provide the best FM reception.
The battery back up system in this clock radio will maintain the time and alarm
settings in the event of a temporary power interruption. When the AC power is restored
the time and alarm settings will be correct. If the AC power is off at your wake up
time, the system will use the battery power to turn on the radio or buzzer alarm
as usual, as long as the back up battery is installed and has sufficient power
remaining.
The battery back up system requires one 9-volt battery, not included. We
recommend that you install an alkaline battery for longest life and best
performance.
.
4
Meijer.com

5
POWER FAILURE INDICATOR
IMPORTANT :
If no battery is installed in the radio, or if the battery in the compartment is weak or
dead, the time and alarm settings will be lost if the power is interrupted. When the
AC power is restored the clock display will begin flashing. This indicates that
the time display is incorrect and needs to be reset.
After you reset the time, be sure to reset your alarm settings as well.
.
OPEN
To install the battery :
Open the battery compartment cover on the
bottom of the radio by pressing the tab in
the direction of the arrow.
Connect the 9-volt battery to the battery
clip. It can only be connected one way.
Push the battery into the battery
compartment and replace the cover.
Meijer.com

6
LOCATION OF CONTROLS AND INDICATORS
1. Night Light.
2. AM Indicator.
3. ALM(Alarm) 'On' Indicator.
4. Time LED Display.
5. Battery Compartment.
(At bottom of cabinet)
6. AC Power Cord.
7. ALARM Selector Switch.
(OFF/ON/AUTO/BUZZER)
8. ALARM / RESET Button.
(Alarm Time Adjustment)
9. SLEEP Button.
10. TIME Adjustment Button.
11. LIGHT (ON/OFF) Switch.
12. HOUR Button.
13. Speaker. (At rear cabinet)
14. MIN. (Minute) Button.
15. VOLUME Control.
16. TUNING Control.
17. BAND (AM/FM) Selector Switch.
18. SNOOZE Button.
(Hello Kitty Doll)
7
9
10
11 13 14
16
18
12
15
17
8
12345 6
Meijer.com

7
OPERATING INSTRUCTIONS
AM indicator
ALM indicator
NOTE : Be sure to observe the AM indicator to make sure that the time is set
correctly for AM or PM. If the AM indicator is 'On', the time displayed is
"AM". If the AM indicator is 'Off' , the time display is "PM".
1. Depress the ALARM/RESET button and the HOUR button to set the correct
wake up Hour.
2. Depress the ALARM/RESET button and the MIN button to set the correct wake
up Minute.
Be sure that you have set the wake up time correctly by observing the AM
indicator. If the AM indicator is 'On', the wake up time is "AM". If the AM
indicator is 'Off', the wake up time is "PM".
Whenever you want to check the wake up time, simply press ALARM/RESET
button. The display will change from the correct time to the wake up time. Release
the ALARM/RESET buttons to return to correct time.
SETTING THE WAKE UP TIMES
CHECKING THE WAKE UP TIMES
NOTE :
.
SETTING THE CLOCK
When you connect the radio to your AC outlet for the first time the clock display will
begin flashing "12:00" . The flashing will stop when you set the time.
1. Depress the TIME button and the HOUR button to set the correct Hour.
2. Depress the TIME button and the MIN button to set the correct Minute.
Meijer.com

8
AM - The AM bar antenna is inside the cabinet. If AM reception is weak, change
the position of cabinet until the internal antenna picks up the strongest signal.
ANTENNA INFORMATION
FM - The FM antenna is built in to the AC power cord. If FM reception is weak try
varying the position and direction of the power cord until you find the strongest
signal.
1. Slide the ALARM selector to ON and select the band, station, and volume level
that you wish to hear when the alarm comes 'On', then slide the ALARM selector
to AUTO position
2. Reconfirm the wake up time settings by pressing the ALARM/RESET button.
3. At the selected wake up the time radio will turn 'On'. It will play for about two
hours and then shut off automatically.
4. To stop the radio sooner, press ALARM/RESET button. The radio will stop but
the alarm remains set and will turn the radio on again at the same time on the
following day.
5. If you do not want the alarm to turn the radio on the following day, set the
ALARM selector to the 'OFF' position.
WAKE TO RADIO
1. Set the BAND selector to the desired band, AM or FM.
2. Set the VOLUME control to a low setting.
3. Slide the ALARM switch to the ON position.
4. Select your desired station with the TUNING control.
5. Adjust the VOLUME control to the desired setting.
6. When you are finished listening, slide the ALARM selector to OFF position to
turn the radio 'Off' .
LISTENING TO THE RADIO
Meijer.com

9
WAKE TO BUZZER
SNOOZE ALARM
1. Set the ALARM selector to the BUZZER position. The ALM indicator will light up
to confirm that the alarm is set.
2. At the selected wake up time the buzzer will sound. It will continue for about
two hours and then shut off automatically.
3. To stop the buzzer sooner, press the ALARM/RESET button. The buzzer
will stop but the alarm remains set and will turn the buzzer on again at the
same time on the following day.
4. If you do not want the alarm to turn the buzzer on the following day, set the
appropriate ALARM selector to the 'OFF' position.
After the radio or buzzer alarm sounds in the morning you may press the SNOOZE
button (Hello Kitty Doll) for a few more minutes sleep. The alarm will stop for
approximately 9 minutes and then turn on again.
Meijer.com
Inhaltsverzeichnis
Andere Hello Kitty Radiowecker Handbücher

Hello Kitty
Hello Kitty KT2053A Bedienungsanleitung

Hello Kitty
Hello Kitty KT2051 Bedienungsanleitung

Hello Kitty
Hello Kitty KT2064PF Bedienungsanleitung

Hello Kitty
Hello Kitty KT2051P Bedienungsanleitung

Hello Kitty
Hello Kitty KT2051 Bedienungsanleitung

Hello Kitty
Hello Kitty KT2056 Bedienungsanleitung

Hello Kitty
Hello Kitty KT2056 Bedienungsanleitung

Hello Kitty
Hello Kitty Hello Kitty KT2054 Bedienungsanleitung

Hello Kitty
Hello Kitty KT2064 Bedienungsanleitung

Hello Kitty
Hello Kitty KT2053 Bedienungsanleitung




















