Helo CAMERA-B-KIT Bedienungsanleitung

HELO CAMERA-B-KIT

Indoor/Outdoor Camera

Quick Start Guide

Schnellstartanleitung

Guide d’Installa on rapide

Guida rapida d’installazione

Guía de inicio rápido

Guia de início rápido

Snelstartgids

Quick Start Guide

Snabbstartsguide

Průvodce rychlým používáním

Príručka pre rýchle spustenie

Vodič za brzi početak upotrebe

Кратко ръководство за бързо

инсталиране

Gyors üzembe helyezési útmutató

Посібник по налаштуванню

Quick Start Guide

Helo by Strong CAMERA-B-KIT

Indoor/Outdoor Camera

Quick Start Guide

Helo by Strong CAMERA-B-KIT

Indoor/Outdoor Camera

II. Product Overview

1 Sync Key 2 Indicator Light 1 3 Indicator Light 2

4 Reset Button 5 SD Card Slot* 6 USB Port

7 WAN Port 8 Power Supply Port

* SD card not included

1 Lens 2 Microphone 3 Indicator Light

4 PIR 5 Light sensor 6 Reset Button

7 On/Oﬀ Button 8 USB Charging Port

I. Packing List

Base Station Adaptor for Base Station Ethernet Cable

WiFi Security Camera Camera Camera USB Cable

Power Adapter

Screws *2 Mounting Base Quick Start Guide

II. Product Overview

1 Sync Key 2 Indicator Light 1 3 Indicator Light 2

4 Reset Button 5 SD Card Slot* 6 USB Port

7 WAN Port 8 Power Supply Port

* SD card not included

1 Lens 2 Microphone 3 Indicator Light

4 PIR 5 Light sensor 6 Reset Button

7 On/Oﬀ Button 8 USB Charging Port

I. Packing List

Base Station Adaptor for Base Station Ethernet Cable

WiFi Security Camera Camera Camera USB Cable

Power Adapter

Screws *2 Mounting Base Quick Start Guide

IV. Getting Started

1. Search for “Helo by Strong” on the Apple App Store or Google

Play Store. Download and install the App.

Cancel

GET

Helo by Strong app

Control Multiple Devices

Only one app manage multiple devices

Helo by Strong app

Control your smart devices !

You can use Helo by Strong App to

control smart lights, smart plugs and

smart devices in your house by voice.

Cancel

INSTALL

Helo by Strong app

Control Multiple Devices

Only one app manage multiple devices

Helo by Strong app

Control your smart devices !

You can use Helo by Strong App to

control smart lights, smart plugs and

smart devices in your house by voice.

Scan it

Note Please make sure that your mobile device OS

is iOS 9.0 or higher, or Android 4.1 or higher.

2. Creating a new account on “Helo by Strong” App.

1 Enter your email address and create a password.

Mobile number/e-mail address

Obtain veriﬁcation code

III. Indicator Light Illustration

Base Station

Indicator Light 1 Solid Red: Activating

Quick Flashing Red:Waiting for Internet Pairing

Quick Flashing Green:Connecting to Server

Solid Green:Connected to Server Successfully

Slow Flashing Red: Device Fault

Slow Flashing Green: Device Upgrading

Indicator Light 2 Flashing Green: Adding camera; The indicator light

will turn oﬀ after completion

SYNC Key SYNC:Press the SYNC key, the Base Station will enter

Adding camera status

Siren Oﬀ :When Siren on, press the SYNC key to turn it oﬀ

Power Port Power Supply Port

SD Card Slot For local Storage (SD Card Max Capacity: 128GB)

USB Slot Connect USB storage device for local storage, up to 2TB

WAN Port Port to connect Router’s LAN port

Reset Button Press and hold for 3s, the base station will be reset.

Camera

Indicator Light Red LED blinks quickly: Standby for conﬁ guration.

Green LED blinks quickly: Network pairing.

Green LED on : Camera online.

Yellow LED blinks slowly : Firmware upgrade.

Solid White LED ON : Camera charging

Red LED blinks slowly : Device fault.

On/oﬀ Button SYNC: Press the button, then the device will enter Waiting

for Pairing status.

Power Button: Press the button to wake up it when the

camera is in deep sleep mode; Press and hold the button

for 3s, the camera will enter deep sleep mode.

USB Charging Port Charging port

Reset Button Press and hold for 3s, the device will power oﬀ and

reboot after reset setting, but the camera will not

be unbound.

IV. Getting Started

1. Search for “Helo by Strong” on the Apple App Store or Google

Play Store. Download and install the App.

Cancel

GET

Helo by Strong app

Control Multiple Devices

Only one app manage multiple devices

Helo by Strong app

Control your smart devices !

You can use Helo by Strong App to

control smart lights, smart plugs and

smart devices in your house by voice.

Cancel

INSTALL

Helo by Strong app

Control Multiple Devices

Only one app manage multiple devices

Helo by Strong app

Control your smart devices !

You can use Helo by Strong App to

control smart lights, smart plugs and

smart devices in your house by voice.

Scan it

Note Please make sure that your mobile device OS

is iOS 9.0 or higher, or Android 4.1 or higher.

2. Creating a new account on “Helo by Strong” App.

1 Enter your email address and create a password.

Mobile number/e-mail address

Obtain veriﬁcation code

III. Indicator Light Illustration

Base Station

Indicator Light 1 Solid Red: Activating

Quick Flashing Red:Waiting for Internet Pairing

Quick Flashing Green:Connecting to Server

Solid Green:Connected to Server Successfully

Slow Flashing Red: Device Fault

Slow Flashing Green: Device Upgrading

Indicator Light 2 Flashing Green: Adding camera; The indicator light

will turn oﬀ after completion

SYNC Key SYNC:Press the SYNC key, the Base Station will enter

Adding camera status

Siren Oﬀ :When Siren on, press the SYNC key to turn it oﬀ

Power Port Power Supply Port

SD Card Slot For local Storage (SD Card Max Capacity: 128GB)

USB Slot Connect USB storage device for local storage, up to 2TB

WAN Port Port to connect Router’s LAN port

Reset Button Press and hold for 3s, the base station will be reset.

Camera

Indicator Light Red LED blinks quickly: Standby for conﬁ guration.

Green LED blinks quickly: Network pairing.

Green LED on : Camera online.

Yellow LED blinks slowly : Firmware upgrade.

Solid White LED ON : Camera charging

Red LED blinks slowly : Device fault.

On/oﬀ Button SYNC: Press the button, then the device will enter Waiting

for Pairing status.

Power Button: Press the button to wake up it when the

camera is in deep sleep mode; Press and hold the button

for 3s, the camera will enter deep sleep mode.

USB Charging Port Charging port

Reset Button Press and hold for 3s, the device will power oﬀ and

reboot after reset setting, but the camera will not

be unbound.

V. Adding Device

1. Add Base Station

1 Please connect your mobile and base station to one router.

2 Open “Helo by Strong” App, click the top right “+” to add

device.

3 Select “Video Surveillance—Base Station”, follow the

instructions to add the base station.

2. Add Camera

1 Please press the On/Oﬀ button of all cameras one by one.

2 Then the cameras will beep, and the indicator light of the

camera starts to ﬂ ash red; If the indicator light does not ﬂ ash red,

please press and hold the reset button for 5s to reset the camera.

3 Enter the Base station interface on the app, click the “+Add

Device” in bottom, or press the pairing button on top of the

base station to enter pairing status, the Indicator light 2 will ﬂ ash

green.

4 When the camera successfully pairs to base station, a voice

prompt will be heard from camera and camera’s indicator light

will turn green, while Indicator light 2 of base station will turn oﬀ

and base station exit the pairing status. Then the added cameras

will be displayed on the app.

5 If there is any camera that could not pair to the base station,

please add the camera again following the above +1 +2 +3

+steps.

VI. Charging Camera

1. The camera is with built-in 6000mAh rechargeable battery.

2. When charging, please use the camera USB cable to connect

camera and camera adaptor, then plug the adptor into power outlet

(100v-240v) for charging. The indicator light on camera will turn

2 Enter your veriﬁ cation code

Enter veriﬁcation

code

A veriﬁcation code has been sent to your email:

[email protected], Resend(51s)

3. Connecting Device

1 Use the Ethernet cable to connect the Base Station to

Router’s LAN port.

2 Plug the adapter to the power outlet to power on the base

station. The Indicator light 1 will change from solid red to blink red

when the base station is ready for pairing.

Internet

1. Need one router connecting to internet

2. Need an Uplink connection with at least 2 Mbps

speed

V. Adding Device

1. Add Base Station

1 Please connect your mobile and base station to one router.

2 Open “Helo by Strong” App, click the top right “+” to add

device.

3 Select “Video Surveillance—Base Station”, follow the

instructions to add the base station.

2. Add Camera

1 Please press the On/Oﬀ button of all cameras one by one.

2 Then the cameras will beep, and the indicator light of the

camera starts to ﬂ ash red; If the indicator light does not ﬂ ash red,

please press and hold the reset button for 5s to reset the camera.

3 Enter the Base station interface on the app, click the “+Add

Device” in bottom, or press the pairing button on top of the

base station to enter pairing status, the Indicator light 2 will ﬂ ash

green.

4 When the camera successfully pairs to base station, a voice

prompt will be heard from camera and camera’s indicator light

will turn green, while Indicator light 2 of base station will turn oﬀ

and base station exit the pairing status. Then the added cameras

will be displayed on the app.

5 If there is any camera that could not pair to the base station,

please add the camera again following the above +1 +2 +3

+steps.

VI. Charging Camera

1. The camera is with built-in 6000mAh rechargeable battery.

2. When charging, please use the camera USB cable to connect

camera and camera adaptor, then plug the adptor into power outlet

(100v-240v) for charging. The indicator light on camera will turn

2 Enter your veriﬁ cation code

Enter veriﬁcation

code

A veriﬁcation code has been sent to your email:

abcd@abcd.com, Resend(51s)

3. Connecting Device

1 Use the Ethernet cable to connect the Base Station to

Router’s LAN port.

2 Plug the adapter to the power outlet to power on the base

station. The Indicator light 1 will change from solid red to blink red

when the base station is ready for pairing.

Internet

1. Need one router connecting to internet

2. Need an Uplink connection with at least 2 Mbps

speed

solid white indicating that the device is in charging (if the indicator

light ﬂ ashes when charging, please contact customer service).

3. It requires 4hrs for full charging. Once full charging, the white

indicator will turn oﬀ

VII. Installing Camera

1. Drill or drive the mounting screws into the wall. If it’s stone wall,

then it requires screw anchor.

2. Mount the mounting base on the screws.

3. Install the camera on the mounting base and adjust the camera

angle.

Recommended mounting height: 2-3 meters

Inhaltsverzeichnis

Sprachen:

Beliebte Digitalkamera Handbücher anderer Marken

Mercury

Mercury 350K Bedienungsanleitung

Pentax

Pentax Optio LS 465 Bedienungsanleitung

Sanyo

Sanyo VPC-S1085 Bedienungsanleitung

GE SMART A1255 Bedienungsanleitung

Point Grey

Point Grey Gazelle Bedienungsanleitung

Nikon

Nikon COOLPIX A Bedienungsanleitung

Pentax

Pentax P-5 Bedienungsanleitung

BlazeVideo

BlazeVideo A280 Bedienungsanleitung

Sony

Sony MCA-20 Bedienungsanleitung

Sony

Sony Alpha DSLR-A290 Bedienungsanleitung

ATIK Cameras

ATIK Cameras One Bedienungsanleitung

CohuHD Costar

CohuHD Costar 3930 Series Bedienungsanleitung

Leica

Leica M10-R Bedienungsanleitung

FujiFilm

FujiFilm FinePix A700 Bedienungsanleitung

Lorex

Lorex LNZ81P25 Series Bedienungsanleitung

GE J1470S Bedienungsanleitung

Sony

Sony A6700 Benutzerhandbuch

Canon

Canon EOS ELAN7 Bedienungsanleitung