Henny Penny CF-941 Bedienungsanleitung
OPERATOR’S MANUAL
Henny Penny
Multipurpose Holding Cabinet
Model CF-941
REGISTER WARRANTY ONLINE AT WWW.HENNYPENNY.COM
Model CF-941
LIMITED WARRANTY FOR HENNY PENNY EQUIPMENT
Subject to the following conditions, Henny Penny Corporation makes the following limited warranties to the original
purchaser only for Henny Penny appliances and replacement parts:
NEW EQUIPMENT: Any part of a new appliance, except baskets, lamps, and fuses, which proves to be defective
in material or workmanship within two (2) years from date of original installation, will be repaired or replaced
without charge F.O.B. factory, Eaton, Ohio, or F.O.B. authorized distributor. Baskets will be repaired or replaced
for ninety (90) days from date of original installation. Lamps and fuses are not covered under this Limited
Warranty. To validate this warranty, the registration card for the appliance must be mailed to Henny Penny within
ten (10) days after installation.
FILTER SYSTEM: Failure of any parts within a fryer filter system caused by the use of the non-OEM filters or
other unapproved filters is not covered under this Limited Warranty.
REPLACEMENT PARTS: Any appliance replacement part, except lamps and fuses, which proves to be defective
in material or workmanship within ninety (90) days from date of original installation will be repaired or replaced
without charge F.O.B. factory, Eaton, Ohio, or F.O.B. authorized distributor.
The warranty for new equipment covers the repair or replacement of the defective part and includes labor charges and
maximum mileage charges of 200 miles round trip for a period of one (1) year from the date of original installation.
The warranty for replacement parts covers only the repair or replacement of the defective part and does not include any
labor charges for the removal and installation of any parts, travel, or other expenses incidental to the repair or replacement of
a part.
EXTENDED FRYPOT WARRANTY: Henny Penny will replace any frypot that fails due to manufacturing or
workmanship issues for a period of up to seven (7) years from date of manufacture. This warranty shall not cover any frypot
that fails due to any misuse or abuse, such as heating of the frypot without shortening.
0 TO 3 YEARS: During this time, any frypot that fails due to manufacturing or workmanship issues
will be replaced at no charge for parts, labor, or freight. Henny Penny will either install a new frypot at no
cost or provide a new or reconditioned replacement fryer at no cost.
3 TO 7 YEARS: During this time, any frypot that fails due to manufacturing or workmanship issues
will be replaced at no charge for the frypot only. Any freight charges and labor costs to install the new
frypot as well as the cost of any other parts replaced, such as insulation, thermal sensors, high limits,
fittings, and hardware, will be the responsibility of the owner.
Any claim must be presented to either Henny Penny or the distributor from whom the appliance was purchased. No
allowance will be granted for repairs made by anyone else without Henny Penny’s written consent. If damage occurs during
shipping, notify the sender at once so that a claim may be filed.
THE ABOVE LIMITED WARRANTY SETS FORTH THE SOLE REMEDY AGAINST HENNY PENNY FOR ANY
BREACH OF WARRANTY OR OTHER TERM. BUYER AGREES THAT NO OTHER REMEDY (INCLUDING
CLAIMS FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES) SHALL BE AVAILABLE.
The above limited warranty does not apply (a) to damage resulting from accident, alteration, misuse, or abuse; (b) if the
equipment’s serial number is removed or defaced; or (c) for lamps and fuses. THE ABOVE LIMITED WARRANTY IS
EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY
AND FITNESS, AND ALL OTHER WARRANTIES ARE EXCLUDED. HENNY PENNY NEITHER ASSUMES NOR
AUTHORIZES ANY PERSON TO ASSUME FOR IT ANY OTHER OBLIGATION OR LIABILITY.
Revised 01/01/07
FM05-016-B
Revised 2-14-07
Model CF-941
TABLE OF CONTENTS
Section Page
Section 1. INTRODUCTION ............................................................................................... 1-1
1-1. Multipurpose Holding Cabinet ................................................................... 1-1
1-2. Features....................................................................................................... 1-1
1-3. Proper Care ................................................................................................. 1-1
1-4. Assistance ................................................................................................... 1-1
1-5. Safety .......................................................................................................... 1-2
Section 2. INSTALLATION ................................................................................................ 2-1
2-1. Introduction................................................................................................. 2-1
2-2. Unpacking................................................................................................... 2-1
2-3. Electrical Requirements.............................................................................. 2-2
2-4. Cabinet Dimensions .................................................................................... 2-2
Section 3. OPERATION....................................................................................................... 3-1
3-1. Introduction................................................................................................. 3-1
3-2. Operating Controls and Components.......................................................... 3-1
3-3. Start-up........................................................................................................ 3-2
3-4. Operating with Product ............................................................................... 3-2
3-5. Cleaning ...................................................................................................... 3-3
3-6. Operation and Programming....................................................................... 3-4
3-7. Error Codes ................................................................................................. 3-6
GLOSSARY ........................................................................................................ G-1
Distributor Lists - Domestic and International
103 i
Model CF-941
SECTION 1. INTRODUCTION
1-1. MULTIPURPOSE The Henny Penny Multipurpose Holding Cabinet
HOLDING CABINET is a basic unit of food equipment designed to hold
hot foods at proper temperature in commercial food
operations. This cabinet will keep hot foods humid
while maintaining temperature.
1-2. FEATURES
•Electronic heat and time control for each drawer
•Drawer accepts 4" steam table pans (1 full or, 2-1/2
size, or 3-1/3 size)
•Easy access to all components for servicing
•High temperature gasket used for drawer seals
•Positive drawer closure to ensure good seal of
compartment
•Easy to clean front drip edge for collection of excess
moisture around drawers
•Solid stainless steel construction
1-3. PROPER CARE As in any unit of food servicing equipment, the
multipurpose holding cabinet does require care and
maintenance. Requirements for the maintenance and
cleaning are contained in this manual and must become a
regular part of the operation of the unit at all times.
1-4. ASSISTANCE Should you require outside assistance, just call your local
Henny Penny distributor in your area, call Henny
Penny Corp. at 1-800-417-8405 toll free or
1-937-456-8405, or visit Henny Penny online at
www.hennypenny.com.
203 1-1
Model CF-941
1-5. SAFETY The only way to ensure safe operation of the Henny
Penny Multipurpose Holding Cabinet is to fully
understand the proper installation, operation and
maintenance procedures. The instructions in this manual
have been prepared to aid you in learning the proper
procedures. Where information is of particular
importance or is safety related, the words NOTICE,
CAUTION, or WARNING are used. Their usage is
described below:
SAFETY ALERT SYMBOL is used with DANGER,
WARNING, or CAUTION which indicates a personal
injury type hazard.
NOTICE is used to highlight especially important
information.
CAUTION used without the safety alert symbol
indicates a potentially hazardous situation
which, if not avoided, may result in property damage.
CAUTION used with the safety alert symbol
indicates a potentially hazardous situation which, if
not avoided, may result in minor or moderate injury.
WARNING indicates a potentially hazardous
situation which, if not avoided, could result in
death or serious injury.
1-2 103
Model CF-941
SECTION 2. INSTALLATION
2-1. INTRODUCTION This section provides the installation instructions for the
Henny Penny Multipurpose Holding Cabinet.
Installation of this unit should be performed by a
qualified service technician.
Do not puncture the skin of unit with drills or
screws as component damage or electrical shock
could result.
2-2. UNPACKING The Henny Penny Multipurpose Holding Cabinet has
been tested, inspected, and expertly packed to ensure
arrival at its destination in the best possible condition.
The cabinet rests on cardboard pads that sit on a wooden
skid. The unit is then packed inside a heavy cardboard
carton with sufficient padding to withstand normal
shipping treatment.
Any shipping damages should be noted in the
presence of the delivery agent and signed prior to his
or her departure.
To remove the Henny Penny Multipurpose Holding
Cabinet from the carton, you should:
1. Carefully cut banding straps.
2. Lift carton off the unit.
3. Lift the unit from the cardboard pads.
Care should be taken when lifting unit to
prevent personal injury. The unit weighs
approximately 67 lbs. (30 kg).
4. Open drawers and remove the packing or
literature that is inside.
103 2-1
Model CF-941
2-2. UNPACKING (Continued) 5. Pull off any protective covering from the
exterior of the cabinet.
6. Your multipurpose holding cabinet is now ready
for location and setup.
2-3. ELECTRICAL The multipurpose holding cabinet is available from
REQUIREMENTS the factory as a 120 VAC unit. The unit is single phase
and requires a grounded receptacle with a separate
electrical line protected by a fuse or circuit breaker of the
proper rating.
To avoid electrical shock, the cabinet must be
adequately and safely grounded (earthed)
according to local electrical codes.
DATA TABLE:
Model
Number Volts Phase Watts Amps
CF-941 120 1 475 3
2-4. CABINET DIMENSIONS
2-2 103
Andere Handbücher für CF-941
1
Inhaltsverzeichnis
Andere Henny Penny Küchengerät Handbücher
Henny Penny
Henny Penny 6.10 Betriebsanleitung
Henny Penny
Henny Penny MMP-941 Bedienungsanleitung
Henny Penny
Henny Penny TR-3 Bedienungsanleitung
Henny Penny
Henny Penny Rotisserie Cooking Bedienungsanleitung
Henny Penny
Henny Penny ESC-115 Electric Bedienungsanleitung
Henny Penny
Henny Penny HHC-902 Bedienungsanleitung
Henny Penny
Henny Penny ROTISSERIE SCR-8 Bedienungsanleitung
Henny Penny
Henny Penny FlexFusion Platinum Series Bedienungsanleitung
Henny Penny
Henny Penny TR-3/6/8 Bedienungsanleitung
Henny Penny
Henny Penny ROTISSERIE SCR-6 Bedienungsanleitung
