Henny Penny FlexFusion Bedienungsanleitung
Model
FPDE615.615
Installation
Manual
FM 05-253 • 23/08/2018
Read the operating manual prior to commissioning
FPDE615.216
FPDE621.615
FPDE621.621
FPDE115.615
FPDE115.621
FPDE121.615
FPDE121.621
FlexFusion® ELECTRIC
PLATINUM COMBI TEAM
PLATINUM
FUSION
FLEX
FM05-253 en-US
%&&'(
)*)+,
-*%!
#$.
/"01
,/"01!
#$.
/"01"1"1
,/"01"1
222)&(&)
! 3
Directory of contents
3Installation instructions
1Introduction......................................................................... 5
1.1About this manual ............................................................................ 5
1.1.1Explanation of signs .................................................................................. 6
1.2Staff qualification ............................................................................. 7
1.3Use of the unit................................................................................... 7
1.4Warranty............................................................................................ 7
2Safety information.............................................................. 8
3Description of the unit ..................................................... 10
3.1Overview of the unit ....................................................................... 10
3.2Equipment and connection data................................................... 10
4Transporting the unit ....................................................... 15
4.1Transporting the unit to the installation site ............................... 15
4.2Unpacking the unit ......................................................................... 15
5Setting up the unit............................................................ 17
5.1Minimum clearances ...................................................................... 17
5.2Lifting the unit off the pallet .......................................................... 18
5.3Placing the unit on the equipment legs........................................ 19
5.4Aligning the unit ............................................................................. 19
6Connecting the unit.......................................................... 20
6.1Opening and closing the housing................................................. 20
6.1.1Removing and attaching side wall........................................................... 20
6.2Making the power connection....................................................... 21
6.2.1Matching the unit to the connection voltage ............................................ 23
6.2.2Connecting the power connection cable ................................................. 25
6.2.3Connecting the power optimisation system............................................. 26
6.2.4Connecting to the potential equalisation circuit ....................................... 27
6.3Connecting the kitchen management system ............................. 27
6.4Making the basic control setting................................................... 29
6.4.1Changing the basic control setting .......................................................... 29
6.5Making the water connection ........................................................ 30
6.5.1Connecting the tap water connection line ............................................... 30
6.5.2Connecting softened tap water to both connections ............................... 31
6.6Making the wastewater connection .............................................. 32
6.6.1Connecting the wastewater line to a permanent connection................... 32
6.7Making the exhaust air connection .............................................. 33
6.7.1Connecting the exhaust air line ............................................................... 34
7Checking operation.......................................................... 35
7.1Checking the controls.................................................................... 35
7.2Checking the monitoring of the cooking zone door ................... 35
FM05-253
Directory of contents
4 Installation instructions
7.3Heating the unit up and rinsing it out........................................... 36
8Putting the unit into service ............................................ 37
8.1Filling out the Commissioning report........................................... 37
FM05-253
Introduction
5Installation instructions
1 Introduction
1.1 About this manual
The instruction manual is part of the unit and contains information on
safe installation of the unit.
Observe and adhere to the following instructions:
•Read the instruction manual in its entirety prior to installation.
•Make the instruction manual available to the installer at the
operating site at all times.
•Preserve the installation manual throughout the service life of the
unit.
•Insert any supplements from the manufacturer.
•Pass on the installation manual to any subsequent operator of the
unit.
Target group The target group for the installation manual is trained technical
personnel that is familiar with installing and operating the unit.
Figures All figures in this manual are intended as examples. Discrepancies
between these and the actual unit can arise.
FM05-253
Introduction
6 Installation instructions
1.1.1 Explanation of signs
DANGER Imminent threat of danger
Failure to comply will lead to death or very severe injuries.
WARNING Possible threat of danger
Failure to comply can lead to death or very severe injuries.
CAUTION Dangerous situation
Failure to comply can lead to slight or moderately severe injuries.
NOTICE Property damage
Failure to comply can cause physical damage.
INFORMATION Information
Notes for better understanding and operation of the unit.
Symbol / sign Meaning
•Listing of information.
Action steps, which can be performed in
any sequence.
1.
2.
Action steps, which must be performed
in the specified sequence.
Result of an action performed or
additional information about it.
FM05-253
Introduction
7Installation instructions
1.2 Staff qualification
Explanation of qualification
Skilled staff •Skilled staff are those, who due to their profes-
sional training, knowledge and experience as well
as their knowledge of the relevant standards can
assess the tasks given to them and recognize any
possible dangers.
Type of activity Qualification
Power connection •Electrician
•Specific professional training
•Employee of the specialist company concerned
Water connection •Plumber
•Specific professional training
•Employee of the specialist company concerned
Wastewater connection •Wastewater specialist
•Specific professional training
•Employee of the specialist company concerned
1.3 Use of the unit
This unit is intended to be used solely for commercial purposes,
particularly in commercial kitchens.
1.4 Warranty
The warranty is void and safety is no longer assured in the event of:
•Improper conversion or technical modifications of the unit,
•Improper use,
•Incorrect startup, operation or maintenance of the unit,
•Problems resulting from failure to observe these instructions.
FM05-253
Safety information
8 Installation instructions
2 Safety information
The unit complies with applicable safety standards. Residual risks
associated with operation or risks resulting from incorrect operation
cannot be ruled out and are mentioned specifically in the safety
instructions and warnings.
The installer must be familiar with regional regulations and observe
them.
The installer must observe the safety instructions in these mounting
instructions and in the "Safety information" chapter of the operating
instructions.
Ensuring conformity with
standards
Observe applicable international, European and national laws,
regulations, standards and directives for the unit when transporting,
setting up and connecting it.
Improper installation Risk of property damage and personal injury from improper
installation
•Install the unit only as specified in these installation instructions.
•Do not add anything to the unit or modify the unit.
•Use only original spare parts.
Transportation and storage Risk of personal injury and property damage from improper
transportation and improper storage
•Store the unit in a dry, frost-free environment.
•Observe the safety regulations for the lifting gear used.
•Attach the unit to the lifting gear securely during transport and
setup, and prevent it from dropping.
•Transport the unit in an upright position, do not tilt or stack.
•Pay attention to protruding parts when transporting the unit
without packaging.
Fire prevention Risk of fire from combustible surfaces
•Observe general fire prevention regulations.
Organisational measures Risk of property damage and personal injury from lack of
organizational measures
•Identify hazard areas when transporting, setting up and
connecting the unit.
•Prior to starting the installation work, notify any operators present
about the procedure.
•Prior to starting the installation work, discuss how to behave in an
emergency.
•Use equipment and protective gear suitable for the activity.
•Brace housing components to prevent them from falling over and
dropping.
FM05-253
Safety information
9Installation instructions
Setup Risk of property damage and personal injury from improper
setup
•Ensure that the installation area has adequate load-bearing
capacity.
•Wear safety shoes and protective gloves.
Electrical connection Risk of fire from improper connection
•Observe applicable regional regulations of the electrical utility.
•Ensure that only electricians licensed by the electric utility connect
the unit.
•Ensure that the electrical system is earthed by a protective
earthing conductor.
•Note the information on the nameplate.
Risk of electric shock from live components.
•Prior to working on the electrical system, switch off the unit,
disconnect the electrical system from the mains and prevent
power from being switched on again. Check to ensure absence of
voltage.
•Use only insulated tools.
Unit on casters Risk of a line breaking if subjected to high tensile load
•Secure the unit with a chain as a strain relief for the power
connection at the installation site so that no tensile load is applied
to the power connection if the unit is moved.
Commissioning Risk of property damage and personal injury from improper
commissioning
•Read the operating instructions prior to commissioning. Observe
the safety instructions in this installation manual and in the "Safety
information" chapter of the operating instructions.
•Put the unit into service only after a successful function test
following assembly.
•Put the unit into service only after it has reached room
temperature.
•Observe the units during operation.
FM05-253
Description of the unit
10 Installation instructions
3 Description of the unit
3.1 Overview of the unit
a
j
i
hgf
e
d
c
b
m
l
k
Image: Floor-standing unit
a Housing h Nameplate
b Support rack i Equipment leg
c Insulated window j Hand shower
d Cooking zone door k Control unit
e Door handle l Air inlet
f Steam drain channel m Steam outlet
g USB port (covered)
3.2 Equipment and connection data
Model FPED
Size 615-615
615-621
621-621
621-615
115-615
115-621
121-615
121-621
Dimensions
Unit Length x Width x Height
(mm(in)) 997 (39,25) x 799 (31,46) x1700 (66,93) 997 (39,25) x 799 (31,46) x1900 (74,80)
Weight
Unit (kg (lb)) 253 (557,77) 291 (641,55)
FM05-253
Dieses Handbuch passt für folgende Modelle
8
Inhaltsverzeichnis
Andere Henny Penny Ofen Handbücher
Henny Penny
Henny Penny FSHN610 Betriebsanleitung
Henny Penny
Henny Penny GCC-620 Bedienungsanleitung
Henny Penny
Henny Penny SCO-100 Bedienungsanleitung
Henny Penny
Henny Penny ESC-615 SmartCombi Bedienungsanleitung
Henny Penny
Henny Penny ESC-615 SmartCombi Leitfaden
Henny Penny
Henny Penny FlexFusion FSEN605 Bedienungsanleitung
Henny Penny
Henny Penny SURE CHEF RT Bedienungsanleitung
Henny Penny
Henny Penny SCR-16 Bedienungsanleitung
Henny Penny
Henny Penny FlexFusion SpaceSaver Plus FSE-610 Bedienungsanleitung
Henny Penny
Henny Penny FlexFusion Electric SpaceSaver Bedienungsanleitung
Henny Penny
Henny Penny FlexFusion FGE 615 Betriebsanleitung
Henny Penny
Henny Penny FlexFusion FPE-615 Betriebsanleitung
Henny Penny
Henny Penny FlexFusion SpaceSaver FSE-605 Bedienungsanleitung
Henny Penny
Henny Penny FSDE610 Bedienungsanleitung
Henny Penny
Henny Penny CombiMaster CM Bedienungsanleitung
Henny Penny
Henny Penny CLIMAPLUS LCS Gebrauchsanweisung
Henny Penny
Henny Penny FlexFusion SpaceSaver Plus FSE-610 Betriebsanleitung
Henny Penny
Henny Penny FlexFusion SpaceSaver FSE-605 Bedienungsanleitung
Henny Penny
Henny Penny FlexFusion SpaceSaver Plus FSE- 610 Bedienungsanleitung
Henny Penny
Henny Penny Electric SpaceSaver Plus 610 Bedienungsanleitung
