HERA DS-2 Bedienungsanleitung
Index
www.heraled.com
R
1
Technical Drawing
Back Cover
5
6
Safety Information
Warranty
Marking
2
Explanation
Details
Ordering Information
3
Block Diagram
4
Cover & Index
Congratulations on choosing a HERA product!
We thank you for your custom.
Please note that this product, as all the others in the rich HERA range, has been designed and made with total quality to ensure excellent
performance and best meet your expectations and requirements. Carefully read this instruction manual in its entirety and keep it safe for
future reference. It is essential to know the information and comply with the instructions given in this manual to ensure the fitting is
installed, used and serviced correctly and safely. HERA disclaims all liability for damage to the fitting or to other property or persons
deriving from installation, use and maintenance that have not been carried out in conformity with this instruction manual, which must
always accompany the fitting. HERA reserves the right to modify the characteristics stated in this instruction manual at any time and
without prior notice.
V.1.1
User’s Manual & Installation Guide
www.heraled.com
20
R
Safety Information
Warranty
Caution – unplug the power supply from the main power before connecting any cables as this can damage the products.
Caution – avoid looking directly into the led light source at close range for your own safety.
Any people installing this product should comply with local standards and regulations and must be qualifed for the handling of
electrical equipment.
• Do not attempt to install or use the product until installation instructions and safety labels are fully understood.
This product is designed for indoor and outdoor usage.
• Ensure product operates within the specifed temperature range.
• Do not attempt to open the product.
• Do not use the product if the power cables are damaged.
• Only use product for specifed voltage.
• Always maintain connection to ensure waterproofing.
• If the product has been subjected to drastic temperature variances, for example, following transportation,
do not connect the fixture until it has reached room temperature, as moisture condensation may cause electric
shock and product damages.
• When installing the products and system power supplies, please ensure they will not be exposed to moisture and extreme heat
(and direct sunlight for outdoor products). Besides, keep a clean operating environment for the fixtures and system power supplies..
• Any non-compliance of the Installation Guide will void the Hera warranty.
Hera warrants the products for a period of three (3) years from date of purchase, provided that
the purchased items are used under the conditions stated in this user manual.
Marking
Please study this Installation Guide thougly and check the lates Tecnical Specification Sheets available from the
our website www.heraled.com before setup.
DS-2 DMX SPLITTER
2
www.heraled.com 3
Details
Hera DS®-2 consists of standard splitter with 1 DMX input, full isolated 2 DMX output. All input and output connections are conducted
with Neutrik® 3 Pin XLR connectors. It is used for distributing and increasing the DMX 512 signal in areas where the number of devices
are a lot. It is produced RAL9004 black as a standard.
• 1 input 2 full isolated output
• 3 Pin Neutrik® XLR Connectors
• Low price high performance
Explanation
Input : 90~264VAC 50/60Hz Universal AC input / Full range
: AC Input 3-Pin VDE Male Socket
Output : DMX Signal Input and Output 3 Pin XLR
Housing : Aluminium Extrusion Body
Screw and Mounting Accessories : Black Iron
Temperature Operating : -40°C - 50°C - (-40° - 122° F)
Storage : -40°C - 85°C - (-40°C - 185° F)
Dimensions (H x W x D): : 44x256x50 mm (1,73x10x1,9 in)
Weight : 0,42 kg (0,92 lb)
Certification : EU safety: EN 60950
EU EMC: EN 55103-1, EN 55103-2, EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3
US safety: ANSI/UL 60950-1
Ordering Information
DS®-2 1in 2 Out Full Isolated Splitter P08005
*Standart product codes that we provided is above. Please contact us for special orders.
R
DS-2 DMX SPLITTER
www.heraled.com 4
Block Diagram
POWERDMX OUTDMX INUSB
DMX Signal
8
Any device which supports Art-Net to DMX 512 or USB Interface
Please Check MADRIX Web Site
Minimum Computer System Requirements
Art-Net
White
DMX (+)
Blue
DMX (-)
Black
GND
*ANSI E1.20 - 2010 Entertaiment Tecnology - RDM over USITT Dmx 512 Networks.
R
DS-2 DMX SPLITTER
50mm
1.9"
44mm
1.7"
256mm /10"
Technical Drawing
www.heraled.com 4
R
DS-2 DMX SPLITTER
www.heraled.com
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere HERA Kabel und Steckverbinder Handbücher
