HESBA CONDOR COUPE Bedienungsanleitung
Instructions manual
HESBA Combination Prams
Condor Coupé, Corrado, Concepto and Concepto Cabrio
EN
We are delighted that you decided to purchase a HESBA pram “Made in Germany”.
We hope you will enjoy the product and have many nice trips with your child in fresh air.
This combination pram has the following features
1. Carrycot
2. Pram
2.1 Pram with LW carrycot (light-weight carrycot)
2.2 Pushchair with safety bar, restraint system and belt
The delivery includes
1 combination pram 1 rain cover
1 safety bar
1 cap for LW carrycot
This instructions manual contains important safety instructions
Read these instructions carefully before use and keep the instructions manual.
Failure to observe these instructions can impair the safety of your child.
IMPORTANT: Keep these instructions for later reference and enquiries.
When used together with the LW carrycot, this combination pram is suitable for a child of 0-6 months old and a maximum weight of 9 kg if
they cannot sit independently, turn or prop themselves up onto their hands and knees.
The pushchair attachment without the LW carrycot is suitable for a child of approx. 6 months and older and a maximum weight of 15 kg.
Seatbelts must be used in the pushchair attachment.
Welcome to HESBA!
Contents
1. Carrycot.........................................................................................................................................................4 – 5
2. Pram
Pram frame ...............................................................................................................................................6
Brake and installation of wheels.................................................................................................... 7
Pneumatic tyres, push handle and basket................................................................................8
2.1 Pram with LW carrycot..............................................................................................................................9
2.2 Pushchair
Safety bar, restraint system and belt..........................................................................................10
Sun protection and seating positions......................................................................................... 11
Seat and cover ........................................................................................................................................12
3. Care and safety instructions...................................................................................................................13
4. Maintenance and guarantee ...................................................................................................................14
Separately available accessories ...............................................................................................................15
Explanation of the symbols
To allow you to use these instructions quickly and clearly, we use different symbols,
which have the following meaning:
Warning Safety instructions
Care instructions Information
4
The carrycot is especially important during the rst weeks.
If your baby has fallen asleep in the pram after an outing, you can carry them
into the house in the LW carrycot without waking them up.
The HESBA LW carrycot always stays in a horizontal position, which promotes a
healthy development of your child.
The inside dimensions of the LW carrycot are 80 x 35 x 22 cm and there is enough
room for your baby to lie comfortably during the rst months.
Warning according to DIN EN 1466:2015-02
• When using the LW carrycot, both straps must be connected with the press stud.
• The carrycot must only be used with the straps directed upwards and both straps must be held.
• Never pull the straps outwards during carrying. The child will no longer be safe and could fall out of the LW carrycot.
• Never use this LW carrycot on a stand.
• This product is only suitable for a child that cannot sit independently yet, roll over to one side or prop themselves up on hands and knees.
Maximum weight of child: 9kg.
• Only use the carrycot on a stable, horizontal and dry surface.
• Do not let other children play near the LW carrycot without supervision.
• Do not use the LW carrycot if a part is broken, torn or missing.
• Do not leave the exible carrying straps inside the LW carrycot.
• Do not use the LW carrycot if the child can sit up without assistance.
• Never place the carrycot near an open re or other heat sources.
• Regularly check the straps and the bottom of the carrycot for damage and signs of wear.
Safety instruction
• In the LW carrycot, the child‘s head should never be lower than the body.
• Do not place an additional mattress on the mattress in the carrycot.
• Max. height of mattress: 3 cm
1. Carrycot
5
Description
The cap can be attached and removed from the LW carrycot using the two press studs .
The LW carrycot can be used with and without cap.
When the LW carrycot gets too small after a few months, the cap of
the LW carrycot can be attached as extension to the lower part of the
pushchair attachment , which enlarges the inside area of the pram.
The pram is then used without the LW carrycot.
Alternatively, an extension part can be ordered as accessory in the
pram colour, which can be attached to the pushchair attachment.
Warning
This feature can only be used while the child cannot sit independently, roll on the side or prop themselves up on hands and knees.
Secure your child with the belt when using this feature.
Care instructions
The mattress cover of our comfort mattress and the lining of the „wash“ version of the LW carrycot can be removed and washed in the was-
hing machine at 30° using a mild detergent. Do not spin. Not suitable for tumble dryers. Velcro® straps must be closed.
1. Carrycot
6
Warning
Make sure that your child is out of reach when folding and unfolding the pram to avoid injuries.
Safety instruction
• Always make sure that the safety bar encloses the tube.
• The safety bar and the two plastic rings prevent unwanted collapsing of the pram.
• Before using the pram, always make sure that both frame locks are in their locked positions.
Unfolding the frame
Engage the brake system. Open the frame by pulling the push handle upwards. The push handle clicks into place automatically when unfolding
the frame. To make the pram ready for use, the two black plastic rings must be pushed over the push handle tubes on the right and on the left.
The frame is now ready for use.
Folding the frame
Before folding the pram, always engage the brake. To fold the pram
frame, the safety bar must be unlocked on the right and the two
black plastic rings must be pushed upwards on the right and left of
the frame.
After unlocking, the pram can be folded easily by moving the
push handle forwards.
The frame can be folded and unfolded in the same way when using
the pram attachment.
Recommendation
The model Corrado only folds together completely with the pram attachment when the canopy is not located at the push handle side since the
push handle cannot be pushed past the side clamp of the canopy.
2. Pram – pram frame
7
Safety instructions
The brake must be engaged when you
• stop the pram, even if it is only for a short time • sit the child up in the pram or take it out
Engaging and releasing the brake with 250 mm rims Engaging and releasing the brake with 300 mm rims
When using wheels with a 250 mm rim, the brake can be engaged by
pushing the brake rod down with the foot and released by reversing
this action and pushing the rod up .
When using wheels with 300 mm rims, the brake rod must be
engaged by pushing the straight part of the rod .
The so-called u-brake is released by stepping on the opening
(=u-angle) of the brake rod.
Installation of the wheels
You can select one of two rim sizes during purchase
• 250 mm
• 300 mm
as well as 3 tyre types
• black pneumatic tyres LR
• black air chamber tyres without tyre tube SL
• white EVA tyres
Remove the plastic cover from the frame shafts. Keep for future storage.
Warning
Danger of suffocation. Keep the plastic covers and plastic bags outside the reach of children.
Make sure that the brake system is re-
leased. Press the bar at the wheel
hub and hold it while pushing the
wheel onto the shaft . Release
the bar and pull the wheel to-
wards you until you hear it click
in place. Pull again to ensure that
the wheel is secured. Repeat this
procedure for all four wheels.
2. Pram – brake and installation of wheels
8
Wheels
Note
• We recommend our black SL wheels, because these tubeless wheels have the comfort of a peumatic tyre and they have the advantage, that
they do not have to be inated.
• Unfortunately pram wheels cannot be balanced like the tyres of a car. Therefore they can show a slight radial run-out (“they wobble”, i.e. they
become misaligned). In this regard we cannot provide any warranty.
Applies to all models with pneumatic tyres
• The pneumatic tyres can be inated with an air pump.
• The pressure must be correct for optimal handling qualities and to avoid at tyres.
Therefore, check the tyre pressure regularly. The pressure must not exceed 30 PSI / 2.0 bar.
• The tyres may show little cracks due to the effect of ozone and UV radiation.
This does not impair the handling qualities and safety of the pram and is no reason for rejection.
Applies to EVA wheels
The elegant hard rubber tyres are less durable have a lower damping property as for example our wheels without tyre tube or pneumatic tyres.
For this reason we recommend this wheel type as an elegant second wheel. Colour: white.
Warning
• Do not go over sharp edges or surfaces with broken glass as this may puncture the peumatic tyres.
• Please also keep in mind that the tyres can stain surfaces. Therefore, do not place the pram on light oor surfaces or lay them on the fabric
covers of the pram.
• On principle, please act carefully at kerbstones or stairs and don’t let the pram sag too strongly. As there is a multiple of weight on the push
handle, the braking axle and the wheels, a break of the braking axle and also of the spokes may occur.
Push handle
Adjusting the push handle height
By simultaneously pressing the two pushbuttons at the right and left of the joint, the height of the push handle can be adjusted.
Basket
The basket at the bottom of the frame can be loaded with a maximum weight of 5 kg. Always place heavy items in the middle of the basket.
The pram can become unstable if the weight in the basket is distributed unevenly. A matching shopping bag for the basket is available as
accessory.
2. Pram – wheels, push handle and basket
9
Description
The pram attachment is fastened to the frame in 4 positions.
There are two grooves on each side of the frame.
Once the attachment is positioned correctly with the four fastening bolts in all four grooves, the two locking levers at the right and left of the
frame must be moved to the “closed” position to fasten and rmly anchor the pram. The attachment is now rmly connected to the frame.
For unlocking, the black safety bar behind the locking bar must be moved to a vertical position .
When using the product as pram, the foot rest must always be in a
horizontal position and fastened with the safety bar so that the
LW carrycot is positioned correctly and fastened.
Fastening the LW carrycot:
To connect the LW carrycot rmly with the pushchair attachment, the
press studs on the right and left as well as in the front and rear of
the carrying straps of the LW carrycot must be attached to the
counterparts at the pushchair.
Safety instruction
• The LW carrycot can topple if the foot rest is not fastened.
• In order not to impair the toppling protection, a shopping bag or other bag must not be put on the push handle and an additional seat for a
second child must not be added to the attachment.
2.1 Pram with LW carrycot
10
Pushchair attachment
As soon as your child can sit independently, you can omit the LW carrycot and put your child in the pushchair attachment.
The pushchair attachment can be positioned in two directions.
At rst, children prefer to look at their “driver”. However, after a certain age, children become curious and want to see their surroundings more.
The position of the attachment can now be changed. To do this, the locking lever and the black safety bar are opened as described above and
the attachment can be removed from the frame. The pushchair attachment can be rotated by 180° and then re-attached as described earlier.
Always make sure that the fabric
cover of the foot rest is always
aligned with the foot rest of
the pushchair. Always leave the
elastic strap under the foot rest.
Belt and safety bar
When using the pushchair attachment, your child must be secured with the belt and the safety bar can be attached to the pushchair. The
safety bar must be clicked into place in the plastic holder at the front of the round tube frame. The belt must secure the shoulders of your
child and rmly latch into place in the front.
Care instructions
The strap pads can be removed and washed at 30°.
The belt system is built in and ready for use. It can be found under
the LW carrycot.
The belt is opened by pressing the centre piece of the buckle,
which releases the belts. The belt is fastened in reverse order by
clicking the plastic parts of the belt into the centre piece.
The length can be adjusted with the small buckles so that the belt is
not too loose.
2.2 Pushchair – safety bar, restraint system and belt
Pushchair in direction of travel
This function is also possible:
click the safety bar into place as
described above and attach the
crotch strap to the safety belt
using the press stud.
Pushchair away from
the direction of travel
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
