5. Safety Standard Installation
Users should ensure that light and installation materials are checked for regular safety
checks. Unprofessional incorrect installation can lead to dangerous, if the lack of working
conditions and professional standards, please operate the light by professionals.
Do not use the light if the working temperature isn’t -15-40 degrees Celsius. Don’t stand
directly under the light When the light is installed, dismantled, moved or serviced. The
operator must ensure that the fixtures are securely connected. Installing the light after
professionals approving electrical parameters make sure that these installation must be
checked at least once per year by experts.
5.1 Hook Clamp Installation
330W Super Beam Light can be placed on the stage or on a stand in any direction，quick lock
system can quickly and easily remove or install a light hook.
Note: must use two clamps fixed equipment, and are 1/4 buckle fastening jig, only fully rotated 90
degrees clockwise to lock fastener.
5.2 Fixing Equipment
1. Before installing fixtures must verified rigging equipment is not damaged, and can bear at
least 10 times of light’s weight. Check the building can be bore at least 10 times of total
weights of light, fixture, and cable accessories.
2. Insert the locked hook fastener into base mounting holes horizontally, grab the handle
clockwise 90 degrees fasteners, in the same way to install a second fastener, make sure the
fastener is fastened under the light base.
3. If truss can be lifted the equipment can be directly clamped from flight case and locked
fixture base. Then hung on the light and fixed it. Before rising the light to right height,
connect the power cord and signal cable.
Note: add a safety rope attached the light's base insurance shelf, do not connect the
device handle.
Note: Lights be placed vertically upward, the shortest distance between working lights
must be more than or equal 1000mm, lighting installation layout as following.
