Hi Sharp HS-ML22M1 Bedienungsanleitung

Thank you for purchasing our product.

Please read this User’s Manual before

using the product. Change without notice

22”

Mouse Control LCD Monitor for CCTV

User’s Manual

This Powerful equipment provides the GUI to direct control the speed dome, DVR, and

matrix functions, therefore the Mouse control monitor will act as a control center to remote

control all of your devices in CCTV system, just by an unsophisticated USB mouse and friendly

GUI operation!

Accessories

(a) Power cord x1

(b)Adapter x1

(d)Bracket x1

(e) Remote controller x1

(f) RS-485 cable x1

(g) USB extension cord x1

(h) USB optical mouse x1

22’’ LCD Monitor Keyboard Mouse control monitor

WARNING:

PRECAUTION

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to the

presence of insulated dangerous Voltage within the

product’s enclosure that may be sufficient magnitude

to constitute risk of electrical shock to persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operation and maintenance (servicing) instructions in

the literature accompanying the appliance.

Precautions

Before using this unit, please read these operating instructions carefully. Take special care to

the follow the warnings indicated on the unit itself as well as the safety suggestions listed

below. Keep them handy for future reference.

1. Power source – The unit operates on DC12V 5A of power.

2. Power cord protection – AC power supply cords should be routed so that they are not

likely to be walked on or pinched by items placed upon or against them. Never take hold

of the plug or cord if your hand is wet, and always grasp the plug body when connecting or

disconnecting it.

3. Water and Moisture – Do not use this unit near the sources of water for moisture will

damage the internal parts.

4. Heat – Do not install the unit near heat sources such as radiators, stoves, heat registers,

or other appliances that product heat.

5. Ventilation – The unit should be situated so that its location or position does not interfere

with its proper ventilation.

6. Foreign Material – Extremely caution should be taken so that the objects do not fall into

the unit.

7. Surface – Place the unit on a flat, level surface or the unit may fall causing serious

damages to the unit.

8. Damage Requiring Service – The unit should be serviced by qualified service personnel

when:

The power cord or the plug has been damaged; or

Objects have fallen or liquid has been spilled into the unit; or the unit has been

exposed to rain or water; or

The unit does not appear to operated normally or exhibits a marked change in

performance; or

The unit has been dropped, or the enclosure damaged.

9. Replacement Parts – Use only manufacturer specified parts. Unauthorized substitutions

may result in fire, electrical shock or other hazards.

10. Service – Should not attempt to service the unit beyond that described in the operating

instructions. All the other servicing should be referred to an authorized service

personnel.

Notification: This device complies with Part 15 of the FCC rules. Operation is subject

to the following two conditions: 1) This device may not cause harmful interference

and 2) This device must accept any interference received, including interference that

may cause undesired operation.

Warning…………………………………………………………………………………………………2

Contents………………………………………………………………………………………………4

Features……………………………………………………….…………………………………...5

1. Key definition & Indication…………………………………………………………………………6

1-1. Keypad definition…………………………………………………………………………6

1-2. Indication…………………………………………………………………………………6

1-2-1. LED indicator………………………………………………………………………6

1-2-2. Sound indication…………………………………………………………………6

1-3. IR remote controller definition……………………………………………………………7

1-4. OSD message description…………………………………………………………………8

2. Mouse button definition…………………………………………………………………………9

3. Connector definition……………………………………………………………………………….10

4. Control mode - Remote control wiring allocations…………………………………………….11

4-1. DVR mode…………………………………………………………………………………11

4-1. Matrix mode………………………………………………………………………………12

5. OSD illustration………………………………………………………………………………....13

5-1.Catalog of GUI symbol guidance……………………………………………………13

5-1-1. Root menu………………………………………………………………………13

5-1-2. LCD menu………………………………………………………………………13

5-1-3. Camera menu……………………………………………………………………14

5-1-4. DVR1 & DVR2 with CAM ID mapping table………………………………14

5-1-5. DVR menu………………………………………………………………………15

5-1-6. Matrix menu………………………………………………………………………16

5-2. OSD control tree…………………………………………………………………………16

5-3. OSD illustration table……………………………………………………………………18

6. PTZ control - DVR / Matrix mode…………………………………………………..…….25

6-1. Software setup……………………………………………………………………………25

6-2. Step by step………………………………………………………………………………26

7. DVR control - DVR / Matrix mode……………………………………………………......28

7-1. Software setup……………………………………………………………………………28

7-2. Step by step………………………………………………………………………………29

8. Matrix control mode-Matrix mode………………………………………………………..…….31

9. Specification…………………………………………………………………………………......32

10. Trouble shooting……………………….……………………………………………………......33

11. Quick system start……………………………………………………………………………......35

Contents

Control center for CCTV system

Provides the USB mouse control interface

Support video system NTSC / PAL

Graphic User Interface (GUI)

Light sensor for save power and automatic to adjust the Monitor luminance

22” wide with ratio 16:10

VESA Mount at central area of display

2CH CVBS in/out

75 ohms Auto Termination

1CH S-Video in

3CH Audio in( 2 for video, 1 for PC)

VGA/DVI-D compatible(up to 1680x1050 @75Hz)

Pelco P/D protocol supported

Tiny 1W*2 speaker

Provides the “Key Lock” function to protect your all of setting

PIP and Side-by-Side scale mode at your preference

Selectable 6500˚K and 9300˚K color temperature

State-of-Art 3D Color Comb Filter and 3D De-interlace technology

Fast refresh rate and response time avoid lagging effect

Up to 32 sets of camera (speed dome) to be controlled for general application

Up to 2 sets of DVR to be controlled for general application

Up to 256 sets of camera/speed dome and 16 sets of DVR to be controlled for advanced

application(via Matrix)

Features

1-1. Keypad definition

No. Name Symbol Function

1 Power Button Power ON/OFF Use this button to turn the LCD power on and off when the main power is supplied.

Menu Button

Push this button to displays the main OSD menu.

Push this button to go back last OSD control level (refer section of OSD control

tree, section 5-2)

3 Up Button ▲ Use this button to select the menu item and adjust the item increment.

4 Down Button ▼ Use this button to select the menu item and adjust the item decrement.

5 Source Button Source The button use to select input source while the all of OSD is off.

6 Select Button AUTO Use this button to execute auto adjustment(VGA only) or selects item of next level.

1-2. Indication

1-2-1 LED indicator

Status Power LED (Green) Power LED (Red)

Power Off ○

Power On ○

Sleeping ○ Blinking for 300ms

:Steady light ○: No light

1-2-2 Sound indication

zDial the virtual key: beep for once

zCommand process successfully: beep for twice

zCommand process error: beep for 1 second

1. Keypad definition & Indication

1-3. IR remote controller definition

No. Name Function

1 PIP Mode Setup the PIP mode for Off/ small pip / large pip/ POP

2 POWER Use this button to turn the power on and off when the main power is supplied.

3 PIP-ZOOM Use this button to adjust the PIP window size.

4 PIP-SOURCE Use this button to select the PIP source input.

5 PIP-SWITCH Use this button to swap the window both main and PIP.

6 AV 1 Direct to select the AV1 source input

7 AV 2 Direct to select the AV 2source input

8 S-VIDEO Direct to select the S-Video source input

9 VGA Direct to select the VGA source input

10 DVI Direct to select the DVI source input

11 MUTE Audio mute.

12 VOLUME- Adjust the volume down.

13 VOLUME+ Adjust the volume up.

14 DISPLAY Displays the source information

15 5

Use this button to select the menu item and adjust the item increment.

16 3

Use this button to adjust value decrement of function.

17 ENTER Use this button to execute adjustment or to select one item of next level.

18 4

Use this button to adjust value increment of function.

19 6

Use this button to select the menu item and adjust the item decrement.

20 MENU

Push this button to displays the main OSD menu.

Push this button to go back last OSD control level (refer section of OSD control level)

21 SCALE MODE Aspect ratio selection for 4:3 and full screen

22 VGA AUTO Auto adjustment while the source input is the VGA.

1-4. OSD message description

Confirm OSD

No Signal input OSD CDS Power off OSD

Going to sleeping mode OSD VGA auto adjusting OSD

Signal out of range OSD

VolumeadjustmentOSD

Mouse button & control behavior explication.

zMain Button (Left or Right defines by user) to decide the

command execution.

zSecond Button(Left or Right defines by user) to pop-up the main

choice OSD menu(Root Menu)

zScroll up:

Zoom in for speed dome control

To increase the value of the selected item within the OSD

area while the OSD appears.

zScroll down:

Zoom out for speed dome control

To decrease the value of the selected item within the OSD

area while the OSD appears.

zMove:

The mouse point is a symbol of arrow normally

That will be changed to the symbol of Hand when the mouse

moving to the adjustable item or the icon can be set.

zScroll Button: Enter the PTZ control.

2. Mouse button definition

1. VGA input

2. DVI (DVI-D) input

3. PC audio in

4. VIDEO1

In: Video 1 input

Out: Video 1 loop output

S-VIDEO: Y/C input

Audio: Audio 1 input

5. VIDEO2

In: Video 2 input

Out: Video 2 loop output

Audio: Audio 2 input

6. Port 1 / Port 2 (remote control socket)

Asocketof“Ctrl mode”(RS-485 Protocol with -RJ-11 connector)

DVR mode – PTZ / Camera connect to port 1. DVR connect to port 2.

Matrix mode – Matrix connect to port 2.

7. Monitor mouse / PC mouse

8. DC12V / 5A IN

Power supply (Adaptor) input

USB mouse

Monitor mouse

PC mouse

USB extension cord

3. Connector definition

①②③ ④ ⑤⑥⑦ ⑧

Inhaltsverzeichnis

Andere Hi Sharp Monitor Handbücher

Hi Sharp

Hi Sharp HS-ML0840 Bedienungsanleitung

Hi Sharp

Hi Sharp HS-ML1952 Bedienungsanleitung

Hi Sharp

Hi Sharp HS-ML22W1 Bedienungsanleitung

Hi Sharp

Hi Sharp HS-ML2011 Bedienungsanleitung

Hi Sharp

Hi Sharp HS-ML3700 Bedienungsanleitung

Hi Sharp

Hi Sharp ML1040 Bedienungsanleitung

Hi Sharp

Hi Sharp 3.5" Bedienungsanleitung

Hi Sharp

Hi Sharp HS-ML1500 Bedienungsanleitung

Hi Sharp

Hi Sharp 19" Bedienungsanleitung

Hi Sharp

Hi Sharp HS-ML1002 Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung