Hi-Target Qmini M series Bedienungsanleitung
Qmini M Series Industrial GIS Data Collector Manual
Qmini M Series
Industrial GIS
Data Collector Manual
Qmini M Series Industrial GIS Data Collector Manual
Handbook revision situation
Revision date
Revision number
Introduction
March 2012
1
Qmini M series industrial GIS data
collector instructions version 1.0
Qmini M Series Industrial GIS Data Collector Manual
Catalogue
Chapter 1 ..........................................................................................................................................4
Products overview.......................................................................................................................4
Product introduction................................................................................................................5
Product features.......................................................................................................................5
Use and the matters needing attention......................................................................................6
Chapter 2 ..........................................................................................................................................7
The introduction of Qmini M series industrial GIS data collector...........................................7
The front of Qmini M series industrial data collector ..............................................................8
The back of Qmini M series industrial data collector..............................................................9
Interfac....................................................................................................................................10
Touching pen..........................................................................................................................11
Battery ....................................................................................................................................11
Data cable...............................................................................................................................13
Belt .........................................................................................................................................13
Chapter 3 ........................................................................................................................................14
Basic operation...........................................................................................................................14
Keyboard................................................................................................................................15
3G card ..................................................................................................................................16
MicroSD card........................................................................................................................17
Power supply system ...........................................................................................................18
◊charge .................................................................................................................................19
Switch machine operation...................................................................................................20
Data obtain ..........................................................................................................................22
Application functions............................................................................................................26
Chapter 4.......................................................................................................................................27
Qmini M Series Industrial GIS Data Collector Manual
Technology parameters .........................................................................................................27
Technology parameters......................................................................................................27
Qmini M Series Industrial GIS Data Collector Manual
1
Preface
Manual use
Welcome to use Qmini M series industrial GIS data collector instructions。This manual
applies to Qmini M1 / Qmini M3 / Qmini MR/Qmini MT/Qmini MP series, this manual
introduces how to install、set up and use industrial GIS data collector.
Brief introduction of manual
Qmini M series industrial GIS data collector is a new GPS/GIS data collector, even if you
have used other types of industrial GIS data collector, please also carefully read the
manual before use .
Experience demanded
In order that you can use Qmini M series industrial GIS data collector well, HI-TARGET
suggests you have a certain measure knowledge, and carefully read the instruction. If you
have any questions, please refer to the official website of the Hi-Target: < http://www.hi-
target.com/ >.
Safety technical note
Note: the noticed content must be special in operation, which need your special attention, please
read carefully.
.
Warn: the warned content is generally very important, if not
operate as warn, it will cause the damage of the instrument, the
loss of the data, and the collapse of the system, even endanger
the security of person
Note: the mentioned content is general special operation, need your
special attention, please read
Qmini M Series Industrial GIS Data Collector Manual
2
Responsibility absolution
Before you use the product, you should read the introduction carefully. Hi-Target surveying
instrument Co. LTD. will not take the responsibility if you do not operate within the product
instruction。
HI-TARGET surveying instrument Co. LTD. is committed to continuously improve product
function and performance, improve the service quality, and keep the right to change the content
of the instruction without noticing in advance.
We have checked that whether the hardware and software are consistent with the content as the
prints say, but we don't rule out the possibility of bias, the picture in the instruction for reference
only, if you have a product with discrepancies, please refer to the product.
Technology and service
Hi-Target have set up the “technology and service” section in website , if you have
problems you can settle them through the "service guide" telephone 、contacting regional
technology center and headquarters division or through the "experts on the judgment
seat," "technology BBS" message, we will answer your questions as soon as possible.
Related information
You can find the instructions through the following methods:
1 Purchased products from the Hi-Target will with a CD, open the CD and you can find
the instruction;
2 Land the official website of the Hi-Target, through "downloaded zone"—" product
specifications "—" GIS product "and you can it.
Your suggestion
If you have any suggestions and opinions about the introduction, please visit the official
website of the Hi-Target, and leave massage in "technical service" —"advice and
Qmini M Series Industrial GIS Data Collector Manual
3
complaint" edition , your feedback will help to improve the quality of the introduction
greatly .
Qmini M Series Industrial GIS Data Collector Manual
4
Chapter 1
Products overview
This chapter introduces:
■Product introduction
■Product features
■Matters needing attention in use
C H A P T E R
1
Qmini M Series Industrial GIS Data Collector Manual
5
Product introduction
Qmini M series industrial GIS data collector products are equipped with complete
navigation and position function and GIS data acquisition function, with the operating
mode of physical buttons and touch screen, inputting in both Chinese and English are
supported. It is designed as industrial standard, and can be dropped from 1.5 meters high
to the cement floor without anything, equipped with IP67 level dustproof and waterproof,
it can adapt to complex work environment in the field. At the same time, the
configuration of the large capacity of lithium battery can meet the requirements of all day
work.
Qmini M series industrial GIS data collector is integrated designed, and it is equipped
with functions such as collection of GPS, embedded Windows Mobile 6.5 system, digital
camera, microphone, 3 G communications, bluetooth communication, large storage, USB
port, SD card expansion ,etc.
Product features
◊Industrial integration design, with a variety of functions
◊Can be used as the industrial standard GPS navigation
◊The built-in digital camera, which can realize image information site acquisition,
automatically realize GPS coordinates and image information matching labeling
◊The built-in microphone, it can realize voice information site collected
◊with the function of speech play
◊The built-in bluetooth , to realize the wireless data transmission
Qmini M Series Industrial GIS Data Collector Manual
6
◊Integrated industrial 3 G wireless communication. Realizing the communication
between management center and mobile GPS terminal, the function is applicable to
Qmini3 / Qmini3P and QminiH3 / QminiHP model.
Use and the matters needing attention
Although Qmini series industrial GIS data collector use the corrosion resistance and
impact resistance materials, but the instrument still need our careful use and maintenance,
and keep it in dry environment as far as possible. In order to improve the stability of the
data collector industrial GIS and use cycle, please avoid industrial GIS data collector
exposed to extreme environment, such as: damp, high temperature, low temperature,
corrosive gas or liquid, etc.
To ensure continuous observation of the satellite tracking and satellite signal quality,
the stations should be set over the open place as far as possible, barriers are not permitted
in more than 15 degree; To reduce the interference of electromagnetic wave to GNSS
satellite signal ,within 200 m strong electromagnetic interference is not permitted, such
as TV tower, microwave station, high voltage transmission line; To avoid or reduce the
happening of the multipath effect, stations should be far away from to the terrain which
reflect electromagnetic wave signal strongly, such as high building, sliced waters, etc.
Warning: industrial GIS data terminal in use and preservation must be
stipulated in the temperature range. Detail requirements, please refer to
chapter 4: technical parameters.
Andere Handbücher für Qmini M series
1
Dieses Handbuch passt für folgende Modelle
5
Inhaltsverzeichnis
Andere Hi-Target Datenlogger Handbücher
