High Sec Labs SC21H-N Bedienungsanleitung

2-Port KVM Combiner

SC21HN | QUICK SETUP GUIDE

Models:

SC21H-N – 2-Port HDMI Video KVM Combiner, PP 3.0 HDC15377 Rev. 1.0

HSL Secure 2-Port KVM Combiner Quick Setup Guide

TABLE OF CONTENTS

SECTIONS

Table of Contents 123

Introduction .......................................................... 2

HSL 2-Port KVM Combiner ....................................................2

Installation............................................................ 3

Installing the Combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Step 1 – Combiner Installation ................................................3

Step 2 – Power ON the Combiner .............................................4

Operation............................................................. 5

Operating the Combiner ......................................................5

HSL Secure 2-Port KVM Combiner Quick Setup Guide

INTRODUCTION

SECTIONS

Table of Contents 2 31

HSL 2-Port KVM Combiner

Interact with multiple computers presented on the same display at the

same time using a single set of USB, audio, keyboard, video and mouse

peripherals.

The KVM Combiner switch offered by HSL provides increased

productivity in challenging multi-computer environments where

users are required to view and interact with several computers

simultaneously.

This guide instructs how to install, configure and operate a HSL KVM

Combiner.

HSL Secure 2-Port KVM Combiner Quick Setup Guide

INSTALLATION

SECTIONS

Table of Contents 1 3

Installing the Combiner

Step 1 – Combiner Installation

1. Verify that all peripherals and computers are turned off prior to

connecting them to the product.

2. The Combiner’s back panel is divided into Console Ports and

Computer Ports sections.

3. Connect peripherals which are due to be shared by the Combiner

to the Console ports.

4. Connect each computer that requires access to the shared

peripherals to a Computer port group.

5. Make sure that every computer is connected to a separate Computer

port group.

6. Computer port group numbers are represented by push buttons on

the product’s front panel.

7. Switch peripherals between computers by pressing the push

buttons on the product’s front panel.

Microphone

Audio Cable

Mouse Cable

Display Cable

Keyboard Cable

Computers

CONSOLE PORTS COMPUTER PORTS

Audio Keyboard Mouse

Display

HSL Secure 2-Port KVM Combiner Quick Setup Guide

INSTALLATION

SECTIONS

Table of Contents 1 3

Step 2 – Power ON the Combiner

•Turn ON all the PCs.

•Connect the power supply and power ON the combiner

•The combiner boots into Tile view-mode, where

source #1 is presented on the upper-left screen

area and source #2 is presented on the lower

right screen area.

Note: In case no picture is presented after

powering ON the combiner, connect an alternate

display to the combiner’s display console port, or

perform a reset to factory default.

Multiple Sources

Speakers

Single

Keyboard & Mouse

PC #1

PC #2

Move mouse

to switch PCs

KVM

COMBINER

KVM

COMBINER

HSL Secure 2-Port KVM Combiner Quick Setup Guide

OPERATION

SECTIONS

Table of Contents 1 2 3

Operating the Combiner

Operation modes determine the device state.

Important Notes:

1. Always use the left control key (CTRL) unless otherwise specified.

2. Do not use the numeric keypad for toggling shortcuts unless otherwise specified.

3. ALL KEYBOARD SHORTCUTS REFER TO QWERTY KEYBOARDS. In case a non-qwerty keyboard is in use, keep using the QWERTY layout. For example, in AZERTY

keyboard, where the letter A is equivalent to the location of the letter Q on a QWERTY keyboard, type { CTRL | CTRL | a } to switch to tile view.

User mode Admin mode

• User mode features:

-This is the default mode.

-Interact with computers:

Simultaneously interact with multiple computers

at the same time using a single set of keyboard

and mouse.

• Key sequence:

Press {Left CTRL | Left CTRL | U} to access User mode.

• Admin mode features:

-Set Combiner resolution settings

-Set Channel window size

-Set Channel window layout

-Set Channel frame and title

-Set Channel aspect ratio

• Key sequence: Press, {Left CTRL | Left CTRL | O} to access the Admin mode.

• On screen text: ‘Admin Mode’ title appears on the lower left screen corner to indicate that Admin mode is active.

• On screen channel number: Channel number appears on top of each channel window frame.

• Admin mode mouse functionality:

-The mouse is used for operation purposes such as, changing channels, toggling between view modes...etc. It cannot be

used for interacting with sources.

-Mouse cursor frame color: Mouse cursor frame color turns RED.

HSL Secure 2-Port KVM Combiner Quick Setup Guide

OPERATION

SECTIONS

Table of Contents 1 2 3

User mode actions Admin mode actions

• Smoothly switch between computers (Virtual

Display Technology - VDT): Automatically switch

control from one computer to another by dragging

the mouse cursor over the computer’s channel

window border. Peripherals switch to the next

computer without having to press any buttons once

the mouse is passing the channel window border.

• Change channel window position:

Click and hold a channel window frame using the left mouse button to drag it to a new position.

• Resize channel window size:

Select a channel window and scroll the mouse middle button to resize it.

-Horizontal resize: align the channel window to the bottom screen area to force horizontal resize.

-Vertical resize: align the channel window to the right to force vertical resize.

User mode key sequences Admin mode menus

• Display modes: Display modes determine how channel windows are presented on the

combiner screen.

-Keyboard key sequences: Use the following key sequences to switch between

various display modes.

• Display modes: Display modes determine how channel windows are presented on the

combiner screen.

• Main menu:

-Allows changing the combiner display modes and screen resolution.

-Access by right clicking any blank screen area.

• Channel menu:

-Allows changing per channel settings.

-Access by right clicking anywhere on a channel window.

Admin mode - Main menu

Access by right clicking any blank screen area from Admin mode.

• Select active channel: switch focus between computers. Press {LCTRL | LCTRL |

Channel#} for example: {LCTRL | LCTRL | 1} to switch to channel#1.

-Full screen channel#1: {LCTRL | LCTRL | Z}.

-Full screen channel#2: {LCTRL | LCTRL | 2}.

• Change resolution: select screen resolution from the list.

-Full screen channel#1: Maximize channel#1 to full screen.

HSL Secure 2-Port KVM Combiner Quick Setup Guide

OPERATION

SECTIONS

Table of Contents 1 2 3

User mode key sequences Admin mode menus

• Picture in Picture: {LCTRL | LCTRL | P}. • Picture in Picture (PiP) mode: Maximize one source screen while presenting the

second source screen as a floating small-sized-window.

• Side by Side: {LCTRL | LCTRL | S}. • Side by Side mode: Align two source screens side by side.

• Custom mode: {LCTRL | LCTRL | C}. • Custom mode: reposition and resize channel windows layout to fit your needs. Click

SAVE to save Custom mode settings.

• Swap Inputs (swap channel windows position): {LCTRL | LCTRL | W}.

• Reset to factory default: Clears all settings and restores the device to its original

configuration {LCTRL | LCTRL | F11 | R}.

• Terminal mode: change product settings from a local terminal console {LCTRL | RCTRL | T}.

Admin mode - Channel menu

Access by right clicking anywhere on a channel window from Admin mode.

• Swap Inputs: Swap channel windows position. Same as {LCTRL | LCTRL | W}.

• Show/Hide Frame: Show or hide the colored channel frame.

• Show/Hide Title: Show or hide the channel window title.

• Aspect Ratio ON/OFF: Once ON, the computer screen aspect ratio is kept inside the

channel window. Once OFF, the computer screen ratio is stretched to fit the entire

channel window size (might distort the picture).

• System Menu: Switch to the Main menu.

• Save: Save settings.

Notes:

1. Keyboard shortcut keys are to be pressed sequentially.

2. CTRL key refers to LEFT CTRL key.

(

)

Tab Q W E R T Y U I O P [

{

]

}

Caps A S D F G H J K L :

;‘

“

Shift

CtrlCtrl Alt Alt

Delete

Enter

Shift

Ctrl

çêè 0

123

456

789-

Num

Lock

Enter

=/*

Insert

Delete

Home

End

Page

Down

Z X C V B N M ?

Images for demonstration purposes only. This document may contain confidential and/or proprietary information of HSL Corporation, and its receipt or possession does not convey any

right to reproduce, disclose its contents, or to manufacture or sell anything that it may describe. Reproduction, disclosure, or use without specific authorization from HSL Corporation

is strictly prohibited.

Highseclabs.com

Inhaltsverzeichnis

Andere High Sec Labs Schalten Handbücher

High Sec Labs

High Sec Labs SK21PH-4 Bedienungsanleitung

High Sec Labs

High Sec Labs SM20-4 Bedienungsanleitung

High Sec Labs

High Sec Labs SC82PH-4 Bedienungsanleitung

High Sec Labs

High Sec Labs SK21D-3 Bedienungsanleitung

High Sec Labs

High Sec Labs SM20N-3 Bedienungsanleitung

High Sec Labs

High Sec Labs K304 Bedienungsanleitung

High Sec Labs

High Sec Labs SX22H-M Bedienungsanleitung

High Sec Labs

High Sec Labs SK41 N Series Bedienungsanleitung

High Sec Labs

High Sec Labs K304 Bedienungsanleitung

High Sec Labs

High Sec Labs Mini-Matrix SX22D-3 Bedienungsanleitung

High Sec Labs

High Sec Labs SM20N-3 Bedienungsanleitung

High Sec Labs

High Sec Labs Mini-Matrix SX22H-3 Bedienungsanleitung

High Sec Labs

High Sec Labs DK22PH-4 Bedienungsanleitung

High Sec Labs

High Sec Labs Mini-Matrix SX22D-3 Bedienungsanleitung

High Sec Labs

High Sec Labs SC21H-3 Bedienungsanleitung

High Sec Labs

High Sec Labs Mini-Matrix SX22D-3 Bedienungsanleitung

High Sec Labs

High Sec Labs SX82PHU-4T Bedienungsanleitung

High Sec Labs

High Sec Labs SC21H-M Bedienungsanleitung

High Sec Labs

High Sec Labs SM20N-N Bedienungsanleitung

High Sec Labs

High Sec Labs SK21D-3 Bedienungsanleitung

High Sec Labs

High Sec Labs SM40N-4 Bedienungsanleitung

High Sec Labs

High Sec Labs SK21 3 Series Bedienungsanleitung

High Sec Labs

High Sec Labs SM20N-4 Bedienungsanleitung

High Sec Labs

High Sec Labs SC21H-3 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung