HighPoint SSD7103 Bedienungsanleitung
SSD7103 Linux Ubuntu 18.04.4 Server Installation Guide
HighPoint NVMe RAID Controller
SSD7103 Linux Ubuntu 18.04.4 Server
Installation Guide
Version 1.04
Copyright © 2020 HighPoint Technologies, Inc.
All rights reserved.
Last updated on April 3, 2020
SSD7103 Linux Ubuntu 18.04.4 Server Installation Guide
i
Table of Contents
1 Overview.......................................................................................................................................1
2 Installing Linux Ubuntu Server on SSD7103 controller...........................................................1
Step 1 Prepare Your Hardware for Installation .........................................................................1
Step 2 Check System EFI Settings............................................................................................1
Step 3 Flash UEFI Rom to SSD7103........................................................................................3
Step 4 Create Array...................................................................................................................4
Step 5 Prepare the Driver Diskette............................................................................................5
Step 6 Install Linux Ubuntu Server...........................................................................................5
3 Monitoring the Driver .................................................................................................................8
4 Installing RAID Management Software.....................................................................................9
5 Rebuilding Driver Module for System Update..........................................................................9
6 Trouble Shooting..........................................................................................................................9
SSD7103 Linux Ubuntu 18.04.4 Server Installation Guide
- 1 -
1 Overview
The purpose of this document is to provide clear instructions on how to install Linux
Ubuntu Server on the SSD7103 controller.
For Ubuntu 18.04.4 Server (kernel: 4.15.0-76)
Ubuntu 18.04.4 Server (HWE kernel:5.3.0-28)
Mirror link:
http://cdimage.ubuntu.com/releases/18.04.4/release/ubuntu-18.04.4-server-amd64.iso
MD5: 880fa4f288c63d7d39a60a8ea70a861f
2 Installing Linux Ubuntu Server on SSD7103
controller
If you would like to install Linux Ubuntu Server onto drives attached to SSD7103
controller, please perform the following operations:
Step 1 Prepare Your Hardware for Installation
After you attach your NVMe SSD to SSD7103 controller, you can use SSD7103 EFI
Utility to configure your NVMe SSD as RAID arrays, or just use them as single disks.
Before installation, you must remove all the NVMe SSD, which are not physically
attached to SSD7103 controller, from your system.
Note
SSD7103 only support EFI boot. If you have other SCSI adapters installed, you must
make sure the SSD7103 controller EFI will be loaded firstly. If not, try to move it to
another PCI slot. Otherwise you may be unable to boot up your system.
Step 2 Check System EFI Settings
In your system EFI SETUP menu, change Boot Sequence in such a way that the system
will first boot from EFI CDROM, and then from SSD7103 RAID. Refer to your
motherboard EFI manual to see how to set boot sequence.
If your EFI settings do not support such a boot sequence, you can first set it to boot from
EFI CDROM. After you finish installation, set SSD7103 RAID as the first boot device to
boot up the system.
1. Set UEFI setting with SuperMicro X11DPi-NT motherboard as an example.
a. "Advanced->PCIe/PCI/PnP Configuration->CPUSlot PCI-E OPROM"
to "EFI".Suppose SSD7103 is connected to motherboard CPU1 Slot 2 PCI-E
X16,then you should set "CPU1 Slot 2 PCI-E X16 OPROM" to "EFI";
SSD7103 Linux Ubuntu 18.04.4 Server Installation Guide
- 2 -
b. Disable "Secure Boot", set "Attempt Secure Boot" to "Disabled".
2. Set UEFI setting withASUS PRIME X299 -DELUXE motherboard as an example:
a. Set "Boot from Storage Devices" to "UEFI driver first";
b. And "Boot Device Control" to "UEFI Only" or "UEFI and Legacy OPROM";
SSD7103 Linux Ubuntu 18.04.4 Server Installation Guide
- 3 -
c. Set "OS Type" to "Other OS".
Step 3 Flash UEFI Rom to SSD7103
a. Unzip SSD7103 UEFI package to root dir(/) of a USB flash driver,and insert the
USB flash drive to the motherboard;
b. Booting from the UEFI USB flash and enter the UEFI environment ;
c. Command with “SSD7103.nsh”, flash UEFI rom to SSD7103 Controller and
reboot;
SSD7103 Linux Ubuntu 18.04.4 Server Installation Guide
- 4 -
Step 4 Create Array
a. Attach four NVMe SSD to SSD7103 Controller ;
Note
Make sure your USB flash partition format is NTFS or FAT32.
b. Boot, in the presence of the motherboard Log screen, there will be NVMe SSD
information：
c. Enter the motherboard’s Boot List and select start from UEFI USB flash:
d. Command ”Arraycreate.efi” to enter the Utility:
SSD7103 Linux Ubuntu 18.04.4 Server Installation Guide
- 5 -
e. Command “create RAID0 ”.
Create RAID0 array with all disks and with maximum capacity.
f. Command “exit”；
g. For more command usages, refer toAppendixA.
Step 5 Prepare the Driver Diskette
Extract HighPoint_NVMe_Ubuntu_18.04.4_x86_64_vx.x.x_xx_xx_xx.tar.gz to top(/)
directory of an USB flash drive. It will look like:
Step 6 Install Linux Ubuntu Server
a. Insert the USB flash drive to the target system.
b. Booting from Installation DVD disc (EFI mode).
c. When the Installation screen appears:
i. Select "Install Ubuntu Server" to install, press ‘e’ to edit boot command line option.
SSD7103 Linux Ubuntu 18.04.4 Server Installation Guide
- 6 -
On the edit command window, move the cursor to the end of line “linux
/install/vmlinuz... ”, and append "modprobe.blacklist=nvme" (double quotation mark are
not include).
Press CTRL-x or F10 to start the system.
ii. Select "Boot and Install with the HWE kernel" to install ,select "Boot and Install
With the HWE kernel" and press Enter;
Select "Install Ubuntu Server", press ‘e’ to edit boot command line option.
On the edit command window, move the cursor to the end of line “linux
/install/vmlinuz... ”, and append "modprobe.blacklist=nvme" (double quotation mark are
not include).
SSD7103 Linux Ubuntu 18.04.4 Server Installation Guide
- 7 -
Press CTRL-x or F10 to start the system.
d. When the installation started:
Press ALT-F2 to switch new console window and press ENTER to activate this console.
And the then execute following commands to copy the driver contents.
# mkdir /hptdd ← Create mount point for USB flash drive
# mount /dev/sda1 /hptdd ← Mount the USB flash drive to /hptdd
#cp -a /hptdd/hptdd /tmp ← Copy driver installation file to
system temporary directory
# umount /dev/sda1 ← Unmount the USB flash drive
When the USB flash drive is unmounted, please unplug the USB flash drive from the
mainboard.And then execute following command to install driver to install the Linux
Ubuntu Server.
# sh /tmp/hptdd/preinst.sh ← Load SSD7103 driver.
SSD7103 Linux Ubuntu 18.04.4 Server Installation Guide
- 8 -
e. Press ALT-F1 to continue system installation.
f. When the installation prompts “Finish the installation”.
Press ALT-F2 and execute following command to install driver to the installed Linux
Ubuntu Server on the array of SSD7103.
# sh /tmp/hptdd/postinst.sh ← Install SSD7103 driver.
g. Press ALT-F1 and press “Continue” to finish the installation.
h. Open source driver needs to be installed after system installation.
http://highpoint-tech.com/USA_new/series-ssd7103-download.htm
Run the .bin file to install the driver package.
# sh hptnvme_g5_linux_src_vxx.x.x_xx_xx_xx.bin
i. Follow the prompts to complete the driver installation.
j. After the installation is complete, you can perform system update operations.
3 Monitoring the Driver
Once the driver is running, you can monitor it through the Linux proc file system support.
There is a special file under /proc/scsi/hptnvme /. Through this file you can view driver
status and send control commands to the driver.
Note
The file name is the SCSI host number allocated by OS. If you have no other SCSI cards
Andere Handbücher für SSD7103
10
Inhaltsverzeichnis
Andere HighPoint Controller Handbücher
HighPoint
HighPoint HPT366 Installations- und Benutzerhandbuch
HighPoint
HighPoint SSD7180 Bedienungsanleitung
HighPoint
HighPoint RocketRAID mini-SAS 6G HBA Series Bedienungsanleitung
HighPoint
HighPoint SSD7580B Bedienungsanleitung
HighPoint
HighPoint Rocket 710L Bedienungsanleitung
HighPoint
HighPoint SSD7110 Bedienungsanleitung
HighPoint
HighPoint Rocket 700L Series Bedienungsanleitung
HighPoint
HighPoint RocketRAID mini-SAS 6G HBA Series Bedienungsanleitung
HighPoint
HighPoint Rocket 700 Series Bedienungsanleitung
HighPoint
HighPoint SSD7580B Bedienungsanleitung
HighPoint
HighPoint Rocket 760A Bedienungsanleitung
HighPoint
HighPoint RocketU Quad USB3.0 Bedienungsanleitung
HighPoint
HighPoint RocketRAID 2722A Bedienungsanleitung
HighPoint
HighPoint SSD7749M Bedienungsanleitung
HighPoint
HighPoint RocketRAID 2711 Bedienungsanleitung
HighPoint
HighPoint SSD7103 Bedienungsanleitung
HighPoint
HighPoint Rocket 620 Bedienungsanleitung
HighPoint
HighPoint R1000 Series Bedienungsanleitung
HighPoint
HighPoint SSD7505 Bedienungsanleitung
HighPoint
HighPoint RocketRAID 37 Series Bedienungsanleitung
