HIK VISION DS-9600NI-ST Series Bedienungsanleitung

Active IP Device by Creating Strong Password

V20150706

This Quick Guide is going to introduce

how to Active IP Device by Creating Strong Password

Before you can log into the device properly, you must create a password for the administrator user

“admin” of the device to activate it. Activation via Local GUI, Activation via Web Browser, Activation via

SADP, and Activation via Client Software are all supported. Follow the steps below to activate the device.

** This function should be supported by the devices.

-IP Cameras FW,

DS-2CD2xx2-I: V5.3.0 Build150513 or Above

-DVR FW,

DS-7200HWI-HK, DS-7300HWI-HK: V3.1.4 Build150430 or Above

-Turbo HD DVR FW,

DS-7200HQHI-HK, DS-7300HQHI-HK, DS-8100HQHI-HK: V3.1.7 Build150515 or Above

-NVR FW,

DS-7600NI-PHK: V3.0.15 Build150528 or Above

DS-7700NI-PHK, DS-8000HFI-HK, DS-9000HWI-ST, DS-9600NI-ST: V3.3.1 Build150423 or Above

Activation via Local GUI (Only Supported by Back-End Devices: DVR/NVR)

Steps:

1. Power on the DVR/NVR.

2. Create a password and input the password into the password field.

STRONG PASSWORD RECOMMENDED –We highly recommend you create a strong password of your

own choosing (using a minimum of 8 characters, including upper case letters, lower case letters,

numbers, and special characters) in order to increase the security of your product. And we

recommend you reset your password regularly, especially in the high security system, resetting the

password monthly or weekly can better protect your product.

Active IP Device by Creating Strong Password

V20150706

Activation via Web Browser

Steps:

1. Power on the IP Device, and connect it to the network.

2. Input the IP address into the address bar of the web browser, and click “Enter”to get the activation

interface.

Notes:

The default IP address of the camera is 192.168.1.64.

For the camera enables the DHCP by default, you need to activate the camera via SADP software.

Please refer to the following chapter for Activation via SADP.

3. Create a password and input the password into the password field.

STRONG PASSWORD RECOMMENDED –We highly recommend you create a strong password of your

own choosing (using a minimum of 8 characters, including upper case letters, lower case letters,

numbers, and special characters) in order to increase the security of your product. And we

recommend you reset your password regularly, especially in the high security system, resetting the

password monthly or weekly can better protect your product.

4. Confirm the password.

5. Click OK to save the password and enter the live view interface.

 

Active IP Device by Creating Strong Password

V20150706

Activation via SADP Software (V2.2.3.5)

SADP software is used for detecting the online device, activating the IP Device, and resetting the

password.

Get the SADP software from the supplied disk or the official website, and install the SADP

according to the prompts. Follow the steps to activate the camera.

Steps:

1. Select the device which is in inactive status. You can also select multiple inactive devices for activating

them simultaneously with the same password.

2. In the Device Activation field, create a password for the device and confirm the password.

STRONG PASSWORD RECOMMENDED –We highly recommend you create a strong password of your

own choosing (using a minimum of 8 characters, including upper case letters, lower case letters,

numbers, and special characters) in order to increase the security of your product. And we

recommend you reset your password regularly, especially in the high security system, resetting the

password monthly or weekly can better protect your product.

3. You can check whether the activation is completed on the popup

window. If activation failed, please make sure that the password meets

the requirement and try again.

4. Change the device IP address to the same subnet with your computer

by either modifying the IP address manually or “Click” the checkbox of

Enable DHCP.

5. Input the password you just created and click the Save button to

activate your IP address modification.

Active IP Device by Creating Strong Password

V20150706

Activation via Client Software (iVMS-4200 V2.3.1.3)

The client software is versatile video management software for multiple kinds of devices.

Get the client software from the supplied disk or the official website, and install the software

according to the prompts. Follow the steps to activate the camera.

Steps:

1. Run the client software and the control panel of the software pops up, as shown in the figure below.

2. Click the “Device Management”icon to enter the Device Management interface, as shown in the

figure below.

Active IP Device by Creating Strong Password

V20150706

3. Check the device status from the device list, and select an inactive device.

4. Click the “Activate”button to pop up the Activation interface.

5. Create a password and input the password in the password field, and confirm the password.

STRONG PASSWORD RECOMMENDED –We highly recommend you create a strong password of your

own choosing (using a minimum of 8 characters, including upper case letters, lower case letters,

numbers, and special characters) in order to increase the security of your product. And we

recommend you reset your password regularly, especially in the high security system, resetting the

password monthly or weekly can better protect your product.

6. Click “OK”button to start activation.

7. Click the “Modify Netinfo”button to pop up the Network Parameter Modification interface, as shown

in the figure below.

Active IP Device by Creating Strong Password

V20150706

8. Change the device IP address to the same subnet with your computer by either modifying the IP

address manually or “Click” the checkbox of Enable DHCP.

9. Input the password you just created and click the Save button to activate your IP address

modification.

- End –

For enquiries, please contact Authorized Distributor in Hong Kong & Macau

1/F, Cheong Lok Building, 199 Cheung Sha Wan Road, Sham Shui Po, Kowloon, Hong Kong

(852) 3182 0888

(852) 3182 0808

cs@wecl.com.hk

http://www.weclonline.com/hikvision

Andere Handbücher für DS-9600NI-ST Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HIK VISION Sicherheitssystem Handbücher

HIK VISION

HIK VISION DS-KD8003-IME1 Bedienungsanleitung

HIK VISION

HIK VISION DS-K1T604M Bedienungsanleitung

HIK VISION

HIK VISION DS-PK-LRT Bedienungsanleitung

HIK VISION

HIK VISION DS-K2M060 Bedienungsanleitung

HIK VISION

HIK VISION DS-K1F600-D6E-F-S Bedienungsanleitung

HIK VISION

HIK VISION AX DS-PW32-H Series Bedienungsanleitung

HIK VISION

HIK VISION DS-PEA22-F Bedienungsanleitung

HIK VISION

HIK VISION AX PRO Bedienungsanleitung

HIK VISION

HIK VISION DS-TCG405-E Bedienungsanleitung

HIK VISION

HIK VISION DS-19A Series Bedienungsanleitung

HIK VISION

HIK VISION DS-PEA12-P/ZJ Bedienungsanleitung

HIK VISION

HIK VISION DS-MI9605-GA Series Bedienungsanleitung

HIK VISION

HIK VISION 607 Series Bedienungsanleitung

HIK VISION

HIK VISION DS-PWA32-HR Bedienungsanleitung

HIK VISION

HIK VISION Blazer Express 16 Bedienungsanleitung

HIK VISION

HIK VISION AX PRO Bedienungsanleitung

HIK VISION

HIK VISION DS-PHA20-P Bedienungsanleitung

HIK VISION

HIK VISION Castle/Pyronix Euro 280 Bedienungsanleitung

HIK VISION

HIK VISION DS-19A08-BNG Bedienungsanleitung

HIK VISION

HIK VISION Blazer Express Station Bedienungsanleitung

HIK VISION

HIK VISION DS-PEA Series Bedienungsanleitung

HIK VISION

HIK VISION DS-MI9605-GA Series Bedienungsanleitung

HIK VISION

HIK VISION DS-PEA1-21 Bedienungsanleitung

HIK VISION

HIK VISION AX PRO M2 Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung