HikRobot VC3000Pro Series Bedienungsanleitung

VC3000Pro Series Vision Controller

User Manual

VC3000Pro Series Vision Controller User Manual

Legal Information

About this Manual

The Manual includes instructions for using and managing the Product. Pictures, charts, images and

all other information hereinafter are for description and explanation only. The information

contained in the Manual is subject to change, without notice, due to firmware updates or other

reasons. Please find the latest version of this Manual at the Hikrobot website

(https://www.hikrobotics.com/). Please use this Manual with the guidance and assistance of

professionals trained in supporting the Product.

Trademarks

and other Hikrobot's trademarks and logos are the properties of Hikrobot in

various jurisdictions. Other trademarks and logos mentioned are the properties of their respective

owners.

: The terms HDMI and HDMI High-Definition Multimedia Interface, and the

HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the

United States and other countries.

Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT

DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED "AS IS" AND "WITH

ALL FAULTS AND ERRORS". HIKROBOT MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING

WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A

PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT

WILL HIKROBOT BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT

DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS

INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,

WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY,

OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKROBOT HAS BEEN

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS,

AND HIKROBOT SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY

LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS

INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKROBOT WILL PROVIDE TIMELY

TECHNICAL SUPPORT IF REQUIRED.

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE

SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.

ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT

INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF

PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.

YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE

VC3000Pro Series Vision Controller User Manual

DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR

PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED

TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS

ABUSES.

THE PERFORMANCE DATA IN THIS PUBLICATION IS BASED ON HIKROBOT'S INTERNAL

RESEARCH/EVALUATION. ACTUAL DATA MAY VARY DEPENDING ON SPECIFIC CONFIGURATIONS

AND OPERATING CONDITIONS AND HIKROBOT SHALL NOT BEAR THE CONSEQUENCES ARISING

THEREFROM.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE

LATTER PREVAILS.

Regulatory Information

FCC Information

Please take attention that changes or modification not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

FCC Compliance

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which

case the user will be required to correct the interference at his own expense.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause

undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied accessories too are marked

with "CE" and comply therefore with the applicable harmonized European

standards listed under the EMC Directive 2014/30/EU, the RoHS Directive

2011/65/EU.

2012/19/EU (WEEE directive): Products marked with this symbol cannot be

disposed of as unsorted municipal waste in the European Union. For proper

recycling, return this product to your local supplier upon the purchase of

equivalent new equipment, or dispose of it at designated collection points.

For more information see: http://www.recyclethis.info

VC3000Pro Series Vision Controller User Manual

iii

2006/66/EC (battery directive): This product contains a battery that cannot

be disposed of as unsorted municipal waste in the European Union. See the

product documentation for specific battery information. The battery is

marked with this symbol, which may include lettering to indicate cadmium

(Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to

your supplier or to a designated collection point. For more information see:

http://www.recyclethis.info

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Danger

Indicates a hazardous situation which, if not avoided, will or could

result in death or serious injury.

Caution

Indicates a potentially hazardous situation which, if not avoided,

could result in equipment damage, data loss, performance

degradation, or unexpected results.

Note

Provides additional information to emphasize or supplement

important points of the main text.

Available Model

This manual is applicable to the VC3000Pro Series Vision Controller.

Safety Instruction

These instructions are intended to ensure that the user can use the device correctly to avoid danger

or property loss.

Caution:

●In the use of the device, you must be in strict compliance with the electrical safety regulations of

the nation and region.

●Use the power adapter provided by the official manufacturer. For the specific requirements of

the power adapter, please refer to the device’s specifications.

●Make sure that the power is switched off when installing or wiring the device.

●To avoid heat accumulation, keep ventilation around the device.

●If the device emits smoke, produces a peculiar smell, or makes noise, please switch off the power

immediately, unplug the power cord, and contact the service center in time.

●Make sure that the device is firmly fixed when installing it in the use environment.

●This is a Class A device that may cause radio interference in a living environment. In this case, the

user may be required to take practical measures against the interference.

●If the device does not work properly, please contact your dealer or the nearest service center.

Never attempt to disassemble the device yourself (we shall not assume any responsibility for

problems caused by unauthorized repair or maintenance).

VC3000Pro Series Vision Controller User Manual

●Do not drop objects on the device or vibrate it vigorously, and keep the device away from places

with magnetic field interference. Avoid installing the device where the surface is subject to

vibration or shock (ignoring this may damage the device).

●Do not use the device in high temperature, low temperature or high humidity environment. For

specific temperature and humidity requirements, please refer to the device’s specifications.

●Do not install the indoor device in an environment where it may be exposed to water or other

liquids.

●Avoid placing the device in direct sunlight, poorly ventilated locations, or near heat sources such

as heaters or radiators (ignoring this may result in a fire hazard).

●After the device is connected to the Internet, you may face network security issues, and please

strengthen the protection of personal information and data security. When you find that the

device may have potential network security risks, please contact us in time.

●Please understand that you are responsible for the reasonable configuration of all passwords and

other related device security settings, and properly keep your user name and password.

●Please keep all original package materials of the device properly, so that when a problem occurs,

use the package materials to pack the device and send it to the agent or return it to the

manufacturer for disposal. We shall not assume any responsibility for accidental damages during

transportation caused by non-original package materials.

Personnel Requirement

Quality requirements for installation and maintenance personnel: Qualification certificate or

working experience in weak current system installation and maintenance, and relevant working

experience and qualifications. Besides, the personnel must possess the following knowledge and

operation skills:

●The basic knowledge and operation skills of low voltage wiring and low voltage electronic circuit

connection.

●The ability to comprehend the contents of this manual.

Contact Information

Hangzhou Hikrobot Technology Co., Ltd.

No. 399 Danfeng Road, Binjiang District, Hangzhou, 310051, China

E-mail: tech_support@hikrobotics.com

Website: https://en.hikrobotics.com/

VC3000Pro Series Vision Controller User Manual 
v 
Contents 
Chapter 1 Overview............................................................................................................................. 1 
1 Introduction...........................................................................................................................1 
2 Key Feature ............................................................................................................................1 
Chapter 2 Appearance.........................................................................................................................2 
1 Main Module Appearance ....................................................................................................2 
2 Extended Module Appearance .............................................................................................3 
2.1 Light Source Extended Module ..................................................................................4 
2.2 IO Extended Module ..................................................................................................5 
Chapter 3 Installation and Access to Device ......................................................................................6 
1 Installation Preparation ........................................................................................................6 
2 Install Main Module ..............................................................................................................6 
2.1 Vertical Mounted .......................................................................................................7 
2.2 Horizontal Mounted...................................................................................................7 
3 Install Extended Module .......................................................................................................8 
4 Access to Device ..................................................................................................................10 
Chapter 4 Interface Description........................................................................................................11 
1 Main Module Interface .......................................................................................................11 
1.1 Power Interface ........................................................................................................11 
1.2 GPIO Interface ..........................................................................................................11 
1.3 Built-In USB Interface ...............................................................................................15 
1.4 mSATA Interface.......................................................................................................15 
1.5 Extended Slot............................................................................................................16 
1.6 Serial Port .................................................................................................................17 
1.7 Remote Switch Interface..........................................................................................17 
1.8 Memory Slot .............................................................................................................18 
2 Extended Module Interface ................................................................................................18 
2.1 Light Source Extended Module Interface ................................................................18 
2.2 IO Extended Module Interface.................................................................................20 

VC3000Pro Series Vision Controller User Manual 
vi 
Chapter 5 VC3000Pro Controller Settings.........................................................................................24 
5.1 Set Connection.....................................................................................................................24 
5.2 Set Main Module .................................................................................................................25 
5.3 Set Light Source Extended Module.....................................................................................25 
5.4 Set IO Extended Module .....................................................................................................26 
5.5 Message Window ................................................................................................................27 
5.6 Enable Edge Detection ........................................................................................................27 
5.7 Reset Parameters ................................................................................................................27 
5.8 Reboot Hardware ................................................................................................................27 
Chapter 6 Firmware Update of Extended Module ...........................................................................28 
Chapter 7 System Reinstallation.......................................................................................................29 
Chapter 8 FAQ (Frequently Asked Question) ...................................................................................30 
8.1 Why the monitor screen is black?.......................................................................................30 
8.2 Why the system is blue screen or crashes, or frequent reboots? .....................................30 
8.3 Why there is no signal feedback of GPIO input and electrical level change? ...................30 
8.4 Why VC3000Pro Controller can run extended modules, but setting parameters failed? 31 

VC3000Pro Series Vision Controller User Manual

Chapter 1 Overview

1.1 Introduction

The VC3000Pro Series Vision Controller adopts high performance CPU and supports 11-channel

GPIO. It has multiple interfaces like GigE, USB 2.0, and USB 3.0. The vision controller can be installed

with additional light source and IO extended modules. It is applicable to consumer electronics, food

and pharmaceutical, transportation, and so on.

1.2 Key Feature

●Adopts Intel(R) CPU 8th generation CPU.

●Provides expansion slot to connect with image frame grabbers.

●Supports 11-channel GPIO and NPN/PNP switching for output.

●Adopts Intel(R) GigE interfaces for stable data transmission.

●Built-in USB interface for on-site maintenance is optional.

●Light source and IO extended modules are optional.

Note

Refer to the device’s specification for detailed parameters.

VC3000Pro Series Vision Controller User Manual

Chapter 2 Appearance

2.1 Main Module Appearance

Figure 2-1 Main Module Appearance

Table 2-1 Main Module Appearance Description

No.

Name

Description

Power

It is used to power on/off the device. Press it shortly to

power on the device, and long press it for 4 s to power off.

Power Indicator

It indicates device power status. The indicator is solid

green when the device is switched on.

HDD Indicator

It indicates HDD status. The indicator is flashing red when

the HDD reads and writes data.

GPIO Interface

It provides input and output function.

Screw Hole for GPIO

Interface

It is used to fix GPIO interface.

HDMI Interface

It is used to transmit audio and video signals.

GigE Interface

It is used to transmit network signal.

VGA Interface

It is used to transmit video signal.

Screw Hole for VGA Interface

It is used to fix VGA interface.

Power Interface

It provides power supply.

VC3000Pro Series Vision Controller User Manual

No.

Name

Description

GND Hole

It is used to connect ground wire.

USB 2.0 Interface

It is used to connect USB flash drive, portable HDD, etc.

Serial Port

It is used for serial communication.

Screw Hole for Serial Port

It is used to fix serial port.

Remote Switch Interface

It is used to power on/off the device remotely.

Screw Hole for Remote

Switch Interface

It is used to fix remote switch interface.

USB 3.0 Interface

It is used to connect USB flash drive, portable HDD, etc.

Audio Interface

It is used to transmit audio signal.

Screw Hole

It is used to fix the device, and you should use M3 or M4

screw.

Snap Fit Component

It is used to connect extended module.

Connection Hole

It is used to connect main module with extended module.

Connection Plug

It is used to connect the plug of extended module.

2.2 Extended Module Appearance

The device can be installed with light source and IO extended modules.

Note

Up to two light source extended modules or two IO extended modules can be installed to the device

at the same time.

Inhaltsverzeichnis

Andere HikRobot Controller Handbücher

HikRobot

HikRobot VB2200 Series Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung